do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Kits
Design911 offers an extensive selection of package deals for
Porsche parts, providing an ideal solution for Porsche enthusiasts looking to
upgrade, maintain, or personalize their vehicles. These packages are
thoughtfully curated to include complementary components, ensuring
compatibility and cost-effectiveness.
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
The part reference 955 349 337 00 is a rubber mounting / support mount for the front-axle final drive / differential, isolating and supporting the front differential (front drive unit) relative to the chassis. There are 3 of the same on each car, this is a SET OF 3
Its purpose is to absorb and damp vibrations, reduce noise transmitted to the chassis, and accommodate slight relative motion between the drivetrain and the vehicle body
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10 (excluding Turbo)
Why these should be replaced / when to suspect failure
- This part is not “optional” — it is essential for maintaining proper alignment, damping, and support of the front differential. But because of its rubber nature and exposure, it is a known wear/failure point. Below are reasons and symptoms for replacement:
- Rubber degradation (cracking, hardening, tearing). Over time, the rubber can become brittle, crack, or split from repeated stress cycles, heat, chemical exposure (oil, road salt, etc.). This reduces its damping ability.
- Delamination / bond failure. The bonding between the rubber and the metal interfaces can fail, leading to slippage or separation under load.
- Excessive deformation / sagging. As the rubber softens or wears, the mount may deform under load, causing misalignment or increased movement under torque.
- Fatigue / wear from repeated cycles. Especially under harsh driving conditions (off-road, heavy loads, aggressive acceleration/shifting), the stress cycles on the mount accelerate wear. Some aftermarket writeups claim that the factory rubber design is prone to “premature Drive Shaft Support failure” because of constant stress on the rubber.
- Heat / ozone / environmental damage. Exposure to high temperatures, undercarriage heat, moisture, road debris, and ozone accelerates rubber aging.
- Load shift or impact damage. If the vehicle strikes a pothole or the differential experiences shock loads, the mount may crack or tear.
Click 'Zoom in' for large parts diagram.
Diagram ref no 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534933700
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
SET OF 2
This exhaust gasket is built to factory dimensions, it seals perfectly between the exhaust manifold and catalytic converter, preventing leaks and preserving smooth exhaust flow and performance.
Fits:
Porsche 997 C2 / C4 all 2005 - 2008
Porsche Cayman 987C MKI & MKII 2005 - 2012
Porsche Boxster 987 MKI & MKII 2005 - 2012
Porsche 982 Boxster GTS 4.0 2017>>
Porsche 982C Cayman GTS 4.0 2017>>
Porsche 982 Spyder 4.0L 2019>>
Porsche 982C GT4 4.0 2019>>
Diagram ref no 7
Located between the manifold / heat exchanger and the catalytic converter / exhaust pipe connection on Porsche models using the M96 / M97 / M98 engines.
Original gaskets may deteriorate over time due to heat, corrosion, and mechanical stress, allowing exhaust gases to escape. Leaks at this junction can cause noise, performance loss, and potential exposure of heat to nearby parts. An OE-Match version restores correct sealing, prevents leaks, and helps preserve the intended exhaust behaviour.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99711111300
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
This replacement sway bar end link, also known as a stabilizer link, connects the anti-roll bar to the suspension control arm or knuckle. It transfers lateral forces to the bar, reducing body roll in corners, enhancing stability, and maintaining precise handling.
SET OF 2, Left and right.
Fits:
Porsche 996 GT2 2000 - 2005
Porsche 996 GT3 MKI 1999 - 2002
Diagram ref no 5
• It mounts at the front anti-roll bar, between the bar and the suspension arm/knuckle.
• It transmits lateral loads from the body to the bar, helping reduce body roll during cornering, improving stability, and preserving handling precision.
With age, sway bar links can wear out, loosen, or develop play in their joints, resulting in clunks, vague steering, excess body roll, or misalignment. A faulty link not only affects handling but may also cause uneven tyre wear and noise over bumps. Replacing it restores correct geometry, rigidity, and stability—bringing back sharp handling and safe, predictable control.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634306992
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Upgrade your Porsche 964 with the OE-Match front and rear shock absorbers. OE Match replacement restores ride comfort, handling, and safety with factory-correct fit and performance.
Fits:
Porsche 964 3.6L Carrera / 3.6L Carrera 4 12/1988-12/1990
Upgrade your vehicle’s handling with OEMatch Sports shock absorbers
OEMatch Sports shock absorbers deliver a sharper, more controlled driving experience with enhanced damping and reduced body roll. Built as direct-fit replacements, they combine sporty performance with everyday comfort, offering improved stability and durability for drivers who want an upgrade without compromising ride quality.
Key Features:
- Direct OE-fit replacement
- Sport-tuned damping for improved handling
- Reduced body roll & enhanced cornering stability
- Durable construction to minimise shock fade
- Maintains comfortable ride for daily use
What Suspension Dampers do
• Dampens and controls spring oscillations to keep the
tires in contact with the road over bumps and irregular surfaces.
• Helps stabilize the vehicle during acceleration,
braking, and cornering by resisting excessive movement of the suspension.
• A worn or failing shock absorber can cause poor
handling, body bounce, longer stopping distances, and uneven tyre wear.
• Replacing with an OE-Match unit restores the damping
characteristics intended by Porsche, improving ride quality, control, and
safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OEMATCH964B6
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Rear shock absorber for Porsche 964. OE Match replacement restores ride comfort, handling, and safety with factory-correct fit and performance.
Fits:
Porsche 964 3.6L Carrera / 3.6L Carrera 4 12/1988 - 12/1990
Price is for a pair of rear shock absorbers - When upgrading from standard suspension, a set of 4 (front and rear) shock absorbers is required
Upgrade your vehicle’s handling with OEMatch Sports shock absorbers
OEMatch Sports shock absorbers deliver a sharper, more controlled driving experience with enhanced damping and reduced body roll. Built as direct-fit replacements, they combine sporty performance with everyday comfort, offering improved stability and durability for drivers who want an upgrade without compromising ride quality.
Key Features:
- Direct OE-fit replacement
- Sport-tuned damping for improved handling
- Reduced body roll & enhanced cornering stability
- Durable construction to minimise shock fade
- Maintains comfortable ride for daily use
What Suspension Dampers do
• Dampens and controls spring oscillations to keep the
tires in contact with the road over bumps and irregular surfaces.
• Helps stabilize the vehicle during acceleration,
braking, and cornering by resisting excessive movement of the suspension.
• A worn or failing shock absorber can cause poor
handling, body bounce, longer stopping distances, and uneven tyre wear.
• Replacing with an OE-Match unit restores the damping
characteristics intended by Porsche, improving ride quality, control, and
safety.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OEMATCH964RR
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
SET OF 4 TUBE.
This OE-Match set includes the non-collapsible oil tube (part number 90110735101) and the matching o-ring seals (9997071124A) required for secure, leak-free installation.
Fits:
Porsche 911 2.0L 1965 - 1969
Porsche 911 1970 - 1989
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998
Diagram Ref No 36 + 37
The tube directs oil back into the sump or oil galleries, while the o-ring ensures a reliable seal at the mating junction to prevent leaks and maintain system integrity.
It replaces worn or damaged lines and seals with components manufactured to original specifications for correct fit, function, and durability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110735101
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
This is a steering rack bellows (also called a tie-rod boot) designed to seal and protect the internal components of the steering rack. It flexes and expands as the steering moves, keeping out dirt, dust, water and debris that could degrade the rack or tie rod internals.
Fits:
Porsche 970.1 Panamera 2010 -2013
Porsche 970.2 Panamera 2014 - 2016
Diagram Ref No 2, 3 & 4
• Built to match Porsche’s original dimensions and material specifications, offering a direct, no-modification replacement
• Restores the protective seal around the rack, preventing premature wear, corrosion, or failure of steering components.
• Helps maintain proper lubrication and longevity of the rack and tie rod ends. Offers peace of mind by replacing worn or cracked bellows that can allow ingress of contaminants.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034719100
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
.jpg?width=197 "Engine Crankcase Breather Kit Porsche 957 Cayenne S / GTS 4.8L 2009-2010 - 94810723602, 94810723601, 94810723501, 94810524504, 94810724702, 94810724502")
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
Engine Crankcase Breather Hose Kit (Silver lids)
The engine crankcase breather hose is a key part of your vehicle’s positive crankcase ventilation (PCV) system. Its main role is to route pressurized gases from the engine crankcase to the PCV valve (also called the air/oil separator). The PCV valve captures harmful oil vapers , drains them back into the engine, and redirects the cleaned air to the intake system to be burned during normal combustion.
Without a properly functioning breather hose, your engine can develop performance issues, oil leaks, and even emissions failures.
Fits:
Porsche 957 Cayenne S / GTS 4.8L 2009 - 2010
Why the Engine Crankcase Breather Hose Matters
During combustion, engines naturally produce positive crankcase pressure. This pressure combines with heat and oil vapers inside the crankcase. The breather hose is designed to handle this flow and keep your PCV system working efficiently.
Over time, however, exposure to heat, oil, and pressure makes the breather hose a common failure point. When damaged, it can cause poor performance, check engine lights, and increased emissions.
Common Symptoms of a Failing Crankcase Breather Hose
- Cracks, leaks, or breaks – Heat and oil vapers degrade rubber or plastic over time, leading to air leaks.
- Broken connectors or clips – Brittle plastic can snap during service or due to age.
- Visible damage – Hoses may split, soften, or harden, creating noticeable holes.
- Check Engine Light (CEL) – Unmetered air from a leak often triggers intake-related fault codes.
- Engine misfires or rough idle – Severe air leaks upset the air/fuel mixture, causing misfires.
Oil residue or odour – Escaping vapers leave oily deposits on the hose, engine block, and nearby components. In severe cases, you may smell burning oil.
Why You Shouldn’t Ignore a Bad Breather Hose
A faulty crankcase breather hose affects engine performance, fuel efficiency, and emissions compliance. Left untreated, it can cause long-term engine damage and costly repairs.
If you notice any of the above signs, it’s important to inspect and replace your crankcase breather hose as part of regular PCV system maintenance.
Diagram ref no 13 (Cyl 1-4) or 14 (Cyl 5-8)
NOTE: This part is compatible only with 957 Cayenne S/GTS models produced from the 2009 model year onwards. It is not compatible with earlier models equipped with the silver AOS.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810723501
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
Engine Crankcase Breather Hose Kit
The engine crankcase breather hose is a key part of your vehicle’s positive crankcase ventilation (PCV) system. Its main role is to route pressurized gases from the engine crankcase to the PCV valve (also called the air/oil separator). The PCV valve captures harmful oil vapers , drains them back into the engine, and redirects the cleaned air to the intake system to be burned during normal combustion.
Without a properly functioning breather hose, your engine can develop performance issues, oil leaks, and even emissions failures.
Fits:
Porsche 957 Cayenne S / GTS 4.8L 2009 - 2010
Why the Engine Crankcase Breather Hose Matters
During combustion, engines naturally produce positive crankcase pressure. This pressure combines with heat and oil vapers inside the crankcase. The breather hose is designed to handle this flow and keep your PCV system working efficiently.
Over time, however, exposure to heat, oil, and pressure makes the breather hose a common failure point. When damaged, it can cause poor performance, check engine lights, and increased emissions.
Common Symptoms of a Failing Crankcase Breather Hose
- Cracks, leaks, or breaks – Heat and oil vapers degrade rubber or plastic over time, leading to air leaks.
- Broken connectors or clips – Brittle plastic can snap during service or due to age.
- Visible damage – Hoses may split, soften, or harden, creating noticeable holes.
- Check Engine Light (CEL) – Unmetered air from a leak often triggers intake-related fault codes.
- Engine misfires or rough idle – Severe air leaks upset the air/fuel mixture, causing misfires.
Oil residue or odour – Escaping vapers leave oily deposits on the hose, engine block, and nearby components. In severe cases, you may smell burning oil.
Why You Shouldn’t Ignore a Bad Breather Hose
A faulty crankcase breather hose affects engine performance, fuel efficiency, and emissions compliance. Left untreated, it can cause long-term engine damage and costly repairs.
If you notice any of the above signs, it’s important to inspect and replace your crankcase breather hose as part of regular PCV system maintenance.
Diagram ref no 13 (Cyl 1-4) or 14 (Cyl 5-8)
NOTE: This part is compatible only with 957 Cayenne S/GTS models produced from the 2009 model year onwards. It is not compatible with earlier models equipped with the silver AOS.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810723603
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
This rear fog light lens is a high-quality replacement part designed for classic Porsche 911 models. Built to original specifications, it fits directly into the rear lamp housing and restores both the appearance and functionality of your lighting system.
Fits: Left or right side, SET OF 2
Fits:
Porsche 911 / 912 1965 - 1986
Diagram ref no 33
This lens protects the internal bulbs and wiring from dirt and moisture while ensuring proper light output for safety and compliance. Over time, original lenses can fade, crack, or discolour—replacing them with this OE Match version brings back a clear, bright look and reliable performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91163197500
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
These OE-Match ball joints mount at the outer ends of the front steering tie rods and tie rod end inner with bellows install with no modifications, delivering factory-spec fit, durability, and restored steering precision.
Fits:
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016
Diagram ref no 7 (LEFT) and 8 (RIGHT), 6, 5, 4, 3 & 2
These ball joints connect the steering rack to the wheel hubs, allowing smooth pivoting while transferring steering input directly to the wheels. They ensure proper steering geometry, reduce play, and maintain even tire wear, giving you precise control at all speeds.
Over time, ball joints wear due to road impacts, vibration, and exposure to the elements. A worn joint can cause loose steering, clunking noises, uneven tire wear, or even unsafe handling. Replacing them guarantees a direct fit, correct articulation, and long-lasting durability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034713300
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
These OE-Match ball joints mount at the outer ends of the front steering tie rods and install with no modifications, delivering factory-spec fit, durability, and restored steering precision.
Fits:
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016
Diagram ref no 7 (LEFT) and 8 (RIGHT).
These ball joints connect the steering rack to the wheel hubs, allowing smooth pivoting while transferring steering input directly to the wheels. They ensure proper steering geometry, reduce play, and maintain even tire wear, giving you precise control at all speeds.
Over time, ball joints wear due to road impacts, vibration, and exposure to the elements. A worn joint can cause loose steering, clunking noises, uneven tire wear, or even unsafe handling. Replacing them guarantees a direct fit, correct articulation, and long-lasting durability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034713101-201
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
Porsche 924 Side Sill Cap Set - Sold as a car set of 4
The Porsche 924 Side Sill Cap Set is a replacement trim that
protects the rocker panel ends from dirt and moisture while restoring a clean,
factory-correct finish ideal for restorations or routine maintenance.
Fits:
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
Diagram ref no 5 and 6
What the Product Does
- Protects sill ends from dirt, stone chips, and road spray.
- Seals vulnerable edges to prevent water ingress and corrosion.
- Provides a clean, finished look to the rocker panel area.
- Restores original factory styling.
Symptoms of Worn or Missing Sill Caps
- Exposed or uneven edges on the rocker panel.
- Increased dirt or moisture accumulation around the sill area.
- Rust starting around the sill ends.
- Trim pieces missing, cracked, or loose.
Common Reasons for Failure
- Aging
Plastic: Original parts become brittle and crack over time.
- Road
Debris: Impacts from stones and grit cause breakage.
- Weather
Exposure: Heat, cold, and UV light degrade materials.
- Accidental Damage: Removal during repairs or maintenance can damage the caps.
Why Replace?
- Prevents
rust and corrosion in critical sill areas.
- Restores
a finished, OEM look to your Porsche 924.
- Keeps debris and moisture from collecting in exposed areas.
- Affordable upgrade that makes a big difference in appearance and protection.
Ideal For: Porsche 924 owners restoring their cars, repairing sill damage, or replacing cracked/missing trim caps.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477853735A
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
.JPG?width=197 "Air filters Set of 2 Porsche 997 3.8L with uprated X51 engine - 99711013200 - LX1585")
.jpg){kind=link}
.JPG){kind=link}
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Fits:
IX51 - Only for cars with Powerkit 250 kW
Porsche 997.1 Carrera S 3.8L 2005-08
Porsche 997.1 Carrera 4S 3.8L 2005-08
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99711013200
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
Comprehensive Engine Timing Chain Kit for M96 Engines
Restore the integrity of your M96 engine’s timing system with this complete timing chain kit. Early-generation M96 engines are equipped with five timing chains—this kit replaces all chains along with the associated guides, tensioners, and hardware for a full system refresh.
Note: If the intake-to-exhaust camshaft timing chain tensioners require replacement, use part numbers 99610505158 and 99610505358.
Fits:
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
What is an Engine Timing Chain?
The timing chain is a vital component in an internal combustion engine, responsible for synchronizing the rotation of the crankshaft and camshafts. This precise coordination ensures that engine valves open and close at the correct times during each cylinder’s intake and exhaust strokes, allowing for smooth performance and efficiency.
While designed to last the lifetime of the engine, timing chains can wear, stretch, or become damaged. A worn chain can alter engine timing, strain the tensioners, and, if left unaddressed, lead to catastrophic engine damage and costly repairs.
Signs of Timing Chain Kit Failure
Noise: A failing timing chain often produces a rattling or slapping noise, particularly noticeable at startup, idle, or during acceleration.
Reduced Performance: Stretched or worn chains can disrupt engine timing, resulting in sluggish acceleration, reduced power, or poor overall performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
ENGINEKIT14
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
Engine crankcase vent breather valve Kit
Crankcase Breather Kit Overview The crankcase breather kit includes the breather valves (also called the air/oil separator or PCV valve) and the breather hoses. These components are typically made of plastic, making them prone to cracking or failure over time. Replacing or maintaining this system proactively improves engine reliability and ensures optimal performance.
Signs of a failing crankcase breather system include air or oil leaks, fouled spark plugs, or blue smoke from the exhaust. If you notice any of these symptoms, inspect the breather system and replace components as needed.
Fits:
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan GTS Petrol 3.0L V6 360Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
Engine Crankcase Breather Hose Kit
The crankcase breather hose is a key part of the engine’s positive crankcase ventilation (PCV) system. It channels pressurized air from the engine crankcase to the PCV valve (air/oil separator). The PCV valve captures and removes oil vapors, draining them back into the engine while sending the remaining pressurized air to the intake for combustion.
Positive crankcase pressure naturally develops during engine operation. Because the hose is constantly exposed to heat, pressure, and oil vapors, it is one of the most common failure points in the PCV system. A damaged or worn hose can impact engine performance, emissions compliance, and overall reliability.
Common Crankcase Breather Hose Failure Symptoms
Cracks, breaks, or leaks: Constant exposure to heat, pressure, and oil vapors can degrade the plastic or rubber, causing air leaks. External damage can also contribute.
Broken connectors or clips: Plastic connectors and securing clips may become brittle over time, breaking during removal or routine maintenance.
Holes or splits in the hose: Soft rubber or brittle plastic can develop visible splits or holes, often accompanied by other issues listed below.
Check Engine Light (CEL): Excess unmetered air from a failed hose can trigger an air intake leak fault or related diagnostic codes.
Engine misfire: Severe air leaks can cause rough running or misfires, a common side effect of a faulty hose or PCV valve.
Oil residue: Escaping vapors often leave visible oil on the hose, engine block, or surrounding components. In severe cases, burnt oil may be noticeable, and the area may require degreasing to locate the source.
Maintaining a healthy crankcase breather system is essential for engine longevity, smooth operation, and proper emissions control.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610723933KIT
The product you are viewing cross references to these numbers
This kit is comprised of the following items: