Kits
Design911 offers an extensive selection of package deals for
Porsche parts, providing an ideal solution for Porsche enthusiasts looking to
upgrade, maintain, or personalize their vehicles. These packages are
thoughtfully curated to include complementary components, ensuring
compatibility and cost-effectiveness.
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 2 / Carrera 2S 2012 - 2016
* For cars with Standard chassis (option code: 029)
Diagram ref no 10
A front coil spring set, supplied as two matched springs, designed to replicate the fit, function, and performance of the original Porsche M029 suspension components. Ideal for maintaining factory-correct ride comfort and stability.
This spring set supports the full front axle load and manages suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain consistent tyre contact, steering accuracy, and ride comfort for everyday driving.
Standard suspension springs gradually weaken and sag due to mileage, load, and road conditions. Replacing only one spring can lead to uneven ride height and compromised comfort. Installing a pair restores correct suspension geometry, factory stance, and the balanced ride.
When to replace:
• Front ride height appears uneven or sagging
• Noticeable reduction in ride comfort or stability
• Visible corrosion, cracks, or spring fatigue
• During front shock or strut replacement
• As part of a standard suspension refresh or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353106504
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 957 Cayenne 3.0L Diesel 2007-10
Complete Water Pump Kit – Water Pump, Thermostat, Serpentine Belt & Gaskets for a Full Cooling System Refresh
This complete water pump kit includes a new water pump, thermostat, drive (serpentine) belt and the required gaskets for both the pump and thermostat housing.
Fits:
- Porsche 957 Cayenne 3.0L Diesel 2007-10 (engine code 059D)
Designed as a comprehensive cooling system service package, it ensures correct coolant circulation, accurate temperature regulation, and reliable accessory belt operation. Ideal for preventative maintenance or full cooling system repair, this kit provides everything needed to restore confidence in your Porsche’s engine cooling performance.
The water pump continuously circulates coolant through the engine and radiators, while the thermostat regulates operating temperature and ensures the engine warms up properly. The serpentine belt drives essential accessories—including the water pump—so replacing all these components together ensures long-term reliability and prevents future breakdowns.
What This Complete Water Pump Kit Does
This cooling system service kit:
- Replaces the water pump to restore proper coolant flow
- Includes a new thermostat for accurate temperature control
- Supplies a fresh serpentine belt to ensure reliable accessory drive operation
- Comes with all required gaskets to prevent leaks during installation
- Improves cooling efficiency, reducing the risk of overheating
- Ensures long-term reliability with coordinated component replacement
- Perfect for workshop servicing, DIY maintenance or high-mileage cooling system refreshes.
Why Water Pumps, Thermostats & Belts Fail
Common failure points include:
- Bearing wear inside the water pump, causing leaks or noise
- Impeller degradation, reducing coolant flow
- Thermostat sticking, leading to overheating or overcooling
- Serpentine belt cracking, glazing or stretching
- Coolant contamination, accelerating component wear
- Heat cycling, which weakens gaskets and housings
Why These Components Should Be Replaced Together
Replacing the pump, thermostat and serpentine belt as a set ensures:
- Restored cooling performance across the entire system
- Correct belt tension and accessory drive function
- Reduced labour costs by avoiding repeat disassembly
- Balanced longevity, as all components age similarly
- Prevention of leaks, thanks to new gaskets and seals
- Peace of mind for daily driving, long trips or track use
This kit offers the most reliable and cost-effective approach to cooling system maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.957.1.GEB
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
Complete Water Pump Kit – Water Pump, Thermostat, Serpentine Belt & Gaskets for a Full Cooling System Refresh
This complete water pump kit includes a new water pump, thermostat, drive (serpentine) belt and the required gaskets for both the pump and thermostat housing.
Fits:
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2011 (engine code 059E)
Designed as a comprehensive cooling system service package, it ensures correct coolant circulation, accurate temperature regulation, and reliable accessory belt operation. Ideal for preventative maintenance or full cooling system repair, this kit provides everything needed to restore confidence in your Porsche’s engine cooling performance.
The water pump continuously circulates coolant through the engine and radiators, while the thermostat regulates operating temperature and ensures the engine warms up properly. The serpentine belt drives essential accessories—including the water pump—so replacing all these components together ensures long-term reliability and prevents future breakdowns.
What This Complete Water Pump Kit Does
This cooling system service kit:
- Replaces the water pump to restore proper coolant flow
- Includes a new thermostat for accurate temperature control
- Supplies a fresh serpentine belt to ensure reliable accessory drive operation
- Comes with all required gaskets to prevent leaks during installation
- Improves cooling efficiency, reducing the risk of overheating
- Ensures long-term reliability with coordinated component replacement
- Perfect for workshop servicing, DIY maintenance or high-mileage cooling system refreshes.
Why Water Pumps, Thermostats & Belts Fail
Common failure points include:
- Bearing wear inside the water pump, causing leaks or noise
- Impeller degradation, reducing coolant flow
- Thermostat sticking, leading to overheating or overcooling
- Serpentine belt cracking, glazing or stretching
- Coolant contamination, accelerating component wear
- Heat cycling, which weakens gaskets and housings
Why These Components Should Be Replaced Together
Replacing the pump, thermostat and serpentine belt as a set ensures:
- Restored cooling performance across the entire system
- Correct belt tension and accessory drive function
- Reduced labour costs by avoiding repeat disassembly
- Balanced longevity, as all components age similarly
- Prevention of leaks, thanks to new gaskets and seals
- Peace of mind for daily driving, long trips or track use
This kit offers the most reliable and cost-effective approach to cooling system maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.958.1.GEB
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 4 / 4S 2012 - 2016
* For cars with Sports suspension (option code: 030)
* For cars with Sports chassis with PASM and PDCC (option code: 031)
Diagram ref no 7
This spring set supports the full front axle load and controls suspension movement during braking, acceleration, and cornering. Replacing both springs together ensures even load distribution, symmetrical ride height, and predictable handling - especially important for sport-tuned suspension systems.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain precise steering response and tyre contact under dynamic driving conditions.
Sport suspension springs operate under higher loads and more aggressive driving conditions. Over time, they can weaken or sag, leading to uneven ride height and reduced handling precision. Installing a pair restores correct suspension geometry, factory sport stance, and the sharp driving dynamics Porsche intended.
When to replace:
• Front ride height appears uneven or lower than specification
• Reduced handling sharpness or increased body roll
• Visible corrosion, cracks, or spring fatigue
• During shock or strut replacement on M030/M031 vehicles
• As part of a sports suspension refresh or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353113504
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.2 Carrera 4 / 4S 2016 - 2019
* for cars with Sport suspension (option code: 030)
* for cars with Sport chassis with PASM and PDCC (option code: 031)
Diagram ref no 7
This spring set supports the axle load and manages suspension movement during braking, acceleration, and cornering. Replacing both springs together ensures even load distribution, symmetrical ride height, and predictable handling response.
Installed within the suspension assembly, the coil springs compress and rebound with suspension travel to absorb road impacts and stabilise the vehicle body. Working together as a matched pair, they help maintain consistent tyre contact, steering accuracy, and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can lead to uneven ride height and compromised handling. Installing a matched OE-Match pair restores correct suspension geometry, factory stance, and predictable driving dynamics.
When to replace:
• Front ride height appears lower or uneven
• Noticeable increase in body roll or reduced handling precision
• Springs show corrosion, cracks, or fatigue
• During shock/strut replacement on M030/M031-equipped vehicles
• As part of a sports suspension refurbishment or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353133504
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.2 Carrera 2 / 2S 2017 - 2019
Porsche 991.2 Carrera 4 / 4S 2017 - 2019
* Cars with Sport suspension (option code: 030)
* Cars with Sport chassis with PASM and PDCC (option code: 031)
Diagram ref no 8
This spring set supports the axle load and manages suspension movement during braking, acceleration, and cornering. Replacing both springs together ensures even load distribution, symmetrical ride height, and predictable handling response.
Installed within the suspension assembly, the coil springs compress and rebound with suspension travel to absorb road impacts and stabilise the vehicle body. Working together as a matched pair, they help maintain consistent tyre contact, steering accuracy, and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can lead to uneven ride height and compromised handling. Installing a pair restores correct suspension geometry, factory stance, and predictable driving dynamics.
When to replace:
• Ride height appears uneven or sagging
• Increased body roll or reduced handling precision
• Visible corrosion, cracks, or spring fatigue
• During shock or strut replacement
• As part of a suspension refresh or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133353115504
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 2 / 2S / GTS 2012 - 2016 Coupe
* For cars with Sports suspension (option code: 030)
* For cars with Sports chassis with PASM and PDCC (option code: 031)
Diagram ref no 10
This spring set supports the full front axle load and manages suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain consistent tyre contact, steering accuracy, and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can result in uneven ride height and compromised handling. Installing a new pair restores correct suspension geometry, factory stance, and predictable driving dynamics
When to replace:
• Front ride height appears uneven or sagging
• Increased body roll or reduced handling precision
• Visible corrosion, cracks, or spring fatigue
• During front shock or strut replacement
• As part of a front suspension refresh
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353108504
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 4 / 4S / 4 GTS 2012 - 2016
Porsche 991.1 Targa 4 GTS 2012 - 2016
* For cars with Standard chassis (option code: 029)
Diagram ref no 10
This spring set supports the full front axle load and manages suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain consistent tyre contact, steering accuracy, and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can result in uneven ride height and compromised handling. Installing a pair restores correct suspension geometry, factory stance, and predictable driving dynamics.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353123504
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
SET OF 2.
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 2 / 2S 2012 - 2016
Porsche 991.2 Carrera 2 / 2S 2016 - 2019
* for cars Electronic damper control for PASM and PDCC (option code: 352)
* for cars "PASM" electronic damper control (option code: 475)
* for cars PASM w/o lowering (option code: 477)
Diagram ref no 7
This spring set supports the full front axle load and controls suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain consistent tyre contact for confident steering response and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can result in uneven ride height and compromised handling. Installing a pair restores correct suspension geometry, factory stance, and predictable driving dynamics
When to replace:
• Front ride height appears uneven or sagging
• Increased body roll or reduced handling precision
• Visible corrosion, cracks, or spring fatigue
• During front shock or strut replacement
• As part of a front suspension refresh
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353130504
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 4 / 4S 2012 - 2016
Porsche 991.1 Targa 4 / 4S 2012 - 2016
Porsche 991.2 Carrera 4 / 4S 2016 - 2019
Porsche 991.2 Targa 4 / 4S 2016 - 2019
* for cars Electronic damper control for PASM and PDCC (option code: 352)
* for cars "PASM" electronic damper control (option code: 475)
* for cars PASM w/o lowering (option code: 477)
Diagram ref no 7
This spring set supports the full front axle load and controls suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain consistent tyre contact for confident steering response and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can result in uneven ride height and compromised handling. Installing a pair restores correct suspension geometry, factory stance, and predictable driving dynamics
When to replace:
• Front ride height appears uneven or sagging
• Increased body roll or reduced handling precision
• Visible corrosion, cracks, or spring fatigue
• During front shock or strut replacement
• As part of a front suspension refresh
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353131504
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche Cayman GT4 3.8L 2015-16
#
# With Brembo brake pads
Porsche Cayman GT4 with steel disc
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT981GT4.F.SHW
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
.jpg?width=197 "Water pump, belt & thermostat insert kit Porsche 955 Cayenne S / turbo - 94810601104, 94810612303, 94810640101, 94811014501, 99919238050, 94810601103, 99610612570, 99610612571")
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Complete Water Pump Kit – Water Pump, Thermostat, Serpentine Belt & Gaskets for a Full Cooling System Refresh
This complete water pump kit includes a new water pump, thermostat, drive (serpentine) belt and the required gaskets for both the pump and thermostat housing.
Fits:
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Designed as a comprehensive cooling system service package, it ensures correct coolant circulation, accurate temperature regulation, and reliable accessory belt operation. Ideal for preventative maintenance or full cooling system repair, this kit provides everything needed to restore confidence in your Porsche’s engine cooling performance.
The water pump continuously circulates coolant through the engine and radiators, while the thermostat regulates operating temperature and ensures the engine warms up properly. The serpentine belt drives essential accessories—including the water pump—so replacing all these components together ensures long-term reliability and prevents future breakdowns.
Kit Includes
Water pump and gasket
Thermostat
Thermostat housing gasket x 2
Inlet manifold gasket x 2
What This Complete Water Pump Kit Does
This cooling system service kit:
- Replaces the water pump to restore proper coolant flow
- Includes a new thermostat for accurate temperature control
- Supplies a fresh serpentine belt to ensure reliable accessory drive operation
- Comes with all required gaskets to prevent leaks during installation
- Improves cooling efficiency, reducing the risk of overheating
- Ensures long-term reliability with coordinated component replacement
- Perfect for workshop servicing, DIY maintenance or high-mileage cooling system refreshes.
Why Water Pumps, Thermostats & Belts Fail
Common failure points include:
- Bearing wear inside the water pump, causing leaks or noise
- Impeller degradation, reducing coolant flow
- Thermostat sticking, leading to overheating or overcooling
- Serpentine belt cracking, glazing or stretching
- Coolant contamination, accelerating component wear
- Heat cycling, which weakens gaskets and housings
Cooling failures can cause warped cylinder heads, engine misfires or complete engine failure if not addressed promptly.
Why These Components Should Be Replaced Together
Replacing the pump, thermostat and serpentine belt as a set ensures:
- Restored cooling performance across the entire system
- Correct belt tension and accessory drive function
- Reduced labour costs by avoiding repeat disassembly
- Balanced longevity, as all components age similarly
- Prevention of leaks, thanks to new gaskets and seals
- Peace of mind for daily driving, long trips or track use
This kit offers the most reliable and cost-effective approach to cooling system maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.955.3.GEB
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Complete Water Pump Kit – Water Pump, Thermostat, Serpentine Belt & Gaskets for a Full Cooling System Refresh
This complete water pump kit includes a new water pump, thermostat, drive (serpentine) belt and the required gaskets for both the pump and thermostat housing.
Fits:
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Designed as a comprehensive cooling system service package, it ensures correct coolant circulation, accurate temperature regulation, and reliable accessory belt operation. Ideal for preventative maintenance or full cooling system repair, this kit provides everything needed to restore confidence in your Porsche’s engine cooling performance.
The water pump continuously circulates coolant through the engine and radiators, while the thermostat regulates operating temperature and ensures the engine warms up properly. The serpentine belt drives essential accessories—including the water pump—so replacing all these components together ensures long-term reliability and prevents future breakdowns.
Kit Includes
Water pump and gasket
Thermostat
Thermostat housing gasket x 2
Inlet manifold gasket x 2
What This Complete Water Pump Kit Does
This cooling system service kit:
- Replaces the water pump to restore proper coolant flow
- Includes a new thermostat for accurate temperature control
- Supplies a fresh serpentine belt to ensure reliable accessory drive operation
- Comes with all required gaskets to prevent leaks during installation
- Improves cooling efficiency, reducing the risk of overheating
- Ensures long-term reliability with coordinated component replacement
- Perfect for workshop servicing, DIY maintenance or high-mileage cooling system refreshes.
Why Water Pumps, Thermostats & Belts Fail
Common failure points include:
- Bearing wear inside the water pump, causing leaks or noise
- Impeller degradation, reducing coolant flow
- Thermostat sticking, leading to overheating or overcooling
- Serpentine belt cracking, glazing or stretching
- Coolant contamination, accelerating component wear
- Heat cycling, which weakens gaskets and housings
Cooling failures can cause warped cylinder heads, engine misfires or complete engine failure if not addressed promptly.
Why These Components Should Be Replaced Together
Replacing the pump, thermostat and serpentine belt as a set ensures:
- Restored cooling performance across the entire system
- Correct belt tension and accessory drive function
- Reduced labour costs by avoiding repeat disassembly
- Balanced longevity, as all components age similarly
- Prevention of leaks, thanks to new gaskets and seals
- Peace of mind for daily driving, long trips or track use
This kit offers the most reliable and cost-effective approach to cooling system maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.955.3.MEY
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Complete Water Pump Kit – Water Pump, Thermostat, Serpentine Belt & Gaskets for a Full Cooling System Refresh
This complete water pump kit includes a new water pump, thermostat, drive (serpentine) belt and the required gaskets for both the pump and thermostat housing.
Fits:
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Designed as a comprehensive cooling system service package, it ensures correct coolant circulation, accurate temperature regulation, and reliable accessory belt operation. Ideal for preventative maintenance or full cooling system repair, this kit provides everything needed to restore confidence in your Porsche’s engine cooling performance.
The water pump continuously circulates coolant through the engine and radiators, while the thermostat regulates operating temperature and ensures the engine warms up properly. The serpentine belt drives essential accessories—including the water pump—so replacing all these components together ensures long-term reliability and prevents future breakdowns.
Kit Includes
Water pump and gasket
Thermostat
Thermostat housing gasket x 2
Inlet manifold gasket x 2
What This Complete Water Pump Kit Does
This cooling system service kit:
- Replaces the water pump to restore proper coolant flow
- Includes a new thermostat for accurate temperature control
- Supplies a fresh serpentine belt to ensure reliable accessory drive operation
- Comes with all required gaskets to prevent leaks during installation
- Improves cooling efficiency, reducing the risk of overheating
- Ensures long-term reliability with coordinated component replacement
- Perfect for workshop servicing, DIY maintenance or high-mileage cooling system refreshes.
Why Water Pumps, Thermostats & Belts Fail
Common failure points include:
- Bearing wear inside the water pump, causing leaks or noise
- Impeller degradation, reducing coolant flow
- Thermostat sticking, leading to overheating or overcooling
- Serpentine belt cracking, glazing or stretching
- Coolant contamination, accelerating component wear
- Heat cycling, which weakens gaskets and housings
Cooling failures can cause warped cylinder heads, engine misfires or complete engine failure if not addressed promptly.
Why These Components Should Be Replaced Together
Replacing the pump, thermostat and serpentine belt as a set ensures:
- Restored cooling performance across the entire system
- Correct belt tension and accessory drive function
- Reduced labour costs by avoiding repeat disassembly
- Balanced longevity, as all components age similarly
- Prevention of leaks, thanks to new gaskets and seals
- Peace of mind for daily driving, long trips or track use
This kit offers the most reliable and cost-effective approach to cooling system maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.955.3.OEM
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 955 Cayenne 3.2L V6 2003-06
Complete Water Pump Kit – Water Pump, Thermostat, Serpentine Belt & Gaskets for a Full Cooling System Refresh
This complete water pump kit includes a new water pump, thermostat, drive (serpentine) belt and the required gaskets for both the pump and thermostat housing.
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
Designed as a comprehensive cooling system service package, it ensures correct coolant circulation, accurate temperature regulation, and reliable accessory belt operation. Ideal for preventative maintenance or full cooling system repair, this kit provides everything needed to restore confidence in your Porsche’s engine cooling performance.
The water pump continuously circulates coolant through the engine and radiators, while the thermostat regulates operating temperature and ensures the engine warms up properly. The serpentine belt drives essential accessories—including the water pump—so replacing all these components together ensures long-term reliability and prevents future breakdowns.
What This Complete Water Pump Kit Does
This cooling system service kit:
- Replaces the water pump to restore proper coolant flow
- Includes a new thermostat for accurate temperature control
- Supplies a fresh serpentine belt to ensure reliable accessory drive operation
- Comes with all required gaskets to prevent leaks during installation
- Improves cooling efficiency, reducing the risk of overheating
- Ensures long-term reliability with coordinated component replacement
- Perfect for workshop servicing, DIY maintenance or high-mileage cooling system refreshes.
Why Water Pumps, Thermostats & Belts Fail
Common failure points include:
- Bearing wear inside the water pump, causing leaks or noise
- Impeller degradation, reducing coolant flow
- Thermostat sticking, leading to overheating or overcooling
- Serpentine belt cracking, glazing or stretching
- Coolant contamination, accelerating component wear
- Heat cycling, which weakens gaskets and housings
Cooling failures can cause warped cylinder heads, engine misfires or complete engine failure if not addressed promptly.
Why These Components Should Be Replaced Together
Replacing the pump, thermostat and serpentine belt as a set ensures:
- Restored cooling performance across the entire system
- Correct belt tension and accessory drive function
- Reduced labour costs by avoiding repeat disassembly
- Balanced longevity, as all components age similarly
- Prevention of leaks, thanks to new gaskets and seals
- Peace of mind for daily driving, long trips or track use
This kit offers the most reliable and cost-effective approach to cooling system maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.955.2.GEB
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
.jpg){kind=link}
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
Porsche Boxster 718
Porsche Cayman 718
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT718.F.SEB
The product you are viewing cross references to these numbers
This kit is comprised of the following items: