Nordschleife
Vehicle Group
- Porsche 944 2.7L 8V 1988-89
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
1 set of retaining arms to repair defective.
Reference numbers: 477857095, 477857123.
Fits:
For vehicles with airbag
Porsche 944 II ('85 -'91)
Porsche 968 (also CS)
• Simple and solid repair solution in original design
• Quality "Made in Germany"
Note:
The geometry corresponds to "1 to 1" the original holding arms and is thus unique in the market.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
5023
The product you are viewing cross references to these numbers
Reference numbers: 477857095, 477857123.
Fits:
For vehicles with airbag
Porsche 944 II ('85 -'91)
Porsche 968 (also CS)
• Simple and solid repair solution in original design
• Quality "Made in Germany"
Note:
The geometry corresponds to "1 to 1" the original holding arms and is thus unique in the market.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
5023
5023
477857095
477857123
The product you are viewing cross references to these numbers
Price: €47.56
In stock
Vehicle Group
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Information
Sliding shoe / tensioner guard + screws / screws for Porsche 944/928 DOHC models.
Porsche ref number: 92810534701.
Fits:
Porsche 944 S / 944 S2
Porsche 928 S 5.0 / 928 S4 / 928 GT / 928 GTS
This polyamide shoe belongs to the lower chain tensioner on all four-valve 944 and 928 cylinder heads. At Porsche, this part is not available individually but it is very important to swap this to prevent an engine damage by a broken shoe.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1055
The product you are viewing cross references to these numbers
Porsche ref number: 92810534701.
Fits:
Porsche 944 S / 944 S2
Porsche 928 S 5.0 / 928 S4 / 928 GT / 928 GTS
This polyamide shoe belongs to the lower chain tensioner on all four-valve 944 and 928 cylinder heads. At Porsche, this part is not available individually but it is very important to swap this to prevent an engine damage by a broken shoe.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1055
92810534701
1055
The product you are viewing cross references to these numbers
Price: €66.12
Orderable
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Double stud bolt with eccentric for anti roll bar. Rear axle.
Replacement for Porsche no : 477511515, 477511516.
Fits:
Porsche 924
Porsche 944
Porsche 968
The original screws are often rusted and the wrench surfaces rarely survive dismantling without damage. Here's a new screw. This screw is made of high-strength material and meet the specifications of the original parts.
Click 'Zoom in' for large parts diagram.
Diagram ref no 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1163
The product you are viewing cross references to these numbers
Replacement for Porsche no : 477511515, 477511516.
Fits:
Porsche 924
Porsche 944
Porsche 968
The original screws are often rusted and the wrench surfaces rarely survive dismantling without damage. Here's a new screw. This screw is made of high-strength material and meet the specifications of the original parts.
Click 'Zoom in' for large parts diagram.
Diagram ref no 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1163
1163
477511515
477511516
The product you are viewing cross references to these numbers
Price: €35.00
In stock
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Screw for power steering pump.
This part fits onto the pump part number: 94434743200, 94434743203, 94434743208.
Fits:
Porsche 924S
Porsche 944 (also S, S2 and turbo) 1982-91
Porsche 968
The special screw for suspending the servo pump has become heavily rusted over the years and difficult to disassemble from the servo pump holders. For the overhaul of the servo pump, the use of new screws is recommended, especially since the key surface and the thread often do not survive the removal undamaged.
The screws are now black galvanized and therefore have better corrosion protection than the original. (Similar picture).
Click 'zoom in' for large parts diagram.
Diagram ref no 17.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1082
The product you are viewing cross references to these numbers
This part fits onto the pump part number: 94434743200, 94434743203, 94434743208.
Fits:
Porsche 924S
Porsche 944 (also S, S2 and turbo) 1982-91
Porsche 968
The special screw for suspending the servo pump has become heavily rusted over the years and difficult to disassemble from the servo pump holders. For the overhaul of the servo pump, the use of new screws is recommended, especially since the key surface and the thread often do not survive the removal undamaged.
The screws are now black galvanized and therefore have better corrosion protection than the original. (Similar picture).
Click 'zoom in' for large parts diagram.
Diagram ref no 17.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1082
1082
94434743208
94434743200
94434743203
The product you are viewing cross references to these numbers
Price: €20.88
In stock
Vehicle Group
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Rear wiper motor delete plug.
Porsche ref no 477845333
For cars with 27mm hole in the screen.
Fits:
944 S2 Turbo (1989-)
968 all
This blind plug when disassembling the rear wiper for clean and visually inconspicuous sealing the hole in the rear window.
A nice side effect:
The reduced weight due to the dismantling of the wiper motor ensures the automatic opening of the tailgate even when unlocked.
Production:
The cap is made of black matt-coated aluminum and is sealed on both sides with rubber pads.
Click 'Zoom in' for large parts diagram.
Diagram ref no 45
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
4001
The product you are viewing cross references to these numbers
Porsche ref no 477845333
For cars with 27mm hole in the screen.
Fits:
944 S2 Turbo (1989-)
968 all
This blind plug when disassembling the rear wiper for clean and visually inconspicuous sealing the hole in the rear window.
A nice side effect:
The reduced weight due to the dismantling of the wiper motor ensures the automatic opening of the tailgate even when unlocked.
Production:
The cap is made of black matt-coated aluminum and is sealed on both sides with rubber pads.
Click 'Zoom in' for large parts diagram.
Diagram ref no 45
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
4001
4001
477845333
477955439
477845331
The product you are viewing cross references to these numbers
Price: €51.04
In stock
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 914 (1970-1976)
Information
Power window cross arm repair kit. Set of 3 rollers.
Fits:
Porsche 914
Porsche 924S
Porsche 944 (also S, S2 and turbo)
Porsche 968
Old electric windows become sluggish and sometimes stutter. This is often due to the worn roles that are clipped on the ends of the cross arms. They are worn, partly stuck and then no longer roll off at the lower edge of the pane. Partly the roles are also completely broken off. They are not individually available at Porsche and so there was no alternative than to look for a slightly better, used and still expensive windows.
With this set of three rollers and a teflon-containing (= PTFE) lubricant can be a window lifter (left or right) renew. The rollers are made of a durable thermoplastic material.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1096
The product you are viewing cross references to these numbers
Fits:
Porsche 914
Porsche 924S
Porsche 944 (also S, S2 and turbo)
Porsche 968
Old electric windows become sluggish and sometimes stutter. This is often due to the worn roles that are clipped on the ends of the cross arms. They are worn, partly stuck and then no longer roll off at the lower edge of the pane. Partly the roles are also completely broken off. They are not individually available at Porsche and so there was no alternative than to look for a slightly better, used and still expensive windows.
With this set of three rollers and a teflon-containing (= PTFE) lubricant can be a window lifter (left or right) renew. The rollers are made of a durable thermoplastic material.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1096
1096
94453704200
94453704100
477837391C
477837392C
The product you are viewing cross references to these numbers
Price: €35.96
In stock
Vehicle Group
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Front bonnet insulation mats. SET OF 2.
Porsche ref no: 94451100513
Fits:
Porsche 968
These insulating mats are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1403
The product you are viewing cross references to these numbers
Porsche ref no: 94451100513
Fits:
Porsche 968
These insulating mats are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1403
1403
94451100513
The product you are viewing cross references to these numbers
Price: €81.20
In stock
Vehicle Group
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Information
Front bonnet insulation mats. SET OF 2.
Porsche ref no: 92855624102, 92855628502.
Fits:
Porsche 928
These insulating mats are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1405
The product you are viewing cross references to these numbers
Porsche ref no: 92855624102, 92855628502.
Fits:
Porsche 928
These insulating mats are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1405
1405
92855624102
92855628502
The product you are viewing cross references to these numbers
Price: €96.28
In stock
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
Information
Front bonnet insulation mats. SET OF 2 (Left and right).
Porsche ref no: 477863771, 94455677201.
Fits:
Porsche 944 1985/2 model onwards
These insulating mats are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 and 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1117
The product you are viewing cross references to these numbers
Porsche ref no: 477863771, 94455677201.
Fits:
Porsche 944 1985/2 model onwards
These insulating mats are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 and 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1117
1117
477863771
94455677201
The product you are viewing cross references to these numbers
Price: €74.24
In stock
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 944 2.5L 8V 1982-87
Information
Front bonnet insulation mats. SET OF 2 (Left and right).
Porsche ref no: 477863771, 477863772.
Fits:
Porsche 924/944 up to 1985/2
These insulating mats are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 and 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1406
The product you are viewing cross references to these numbers
Porsche ref no: 477863771, 477863772.
Fits:
Porsche 924/944 up to 1985/2
These insulating mats are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 and 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1406
1406
477863771
94455677200
477863772
The product you are viewing cross references to these numbers
Price: €63.80
In stock
Vehicle Group
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
Information
Front bonnet insulation mats. SET OF 2 (Left and right).
Porsche ref no 477863771, 477863772A.
Fits:
Porsche 924 Turbo
These insulating are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 and 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1404
The product you are viewing cross references to these numbers
Porsche ref no 477863771, 477863772A.
Fits:
Porsche 924 Turbo
These insulating are produced to the highest quality standards and hardly distinguishable from the original, partly no longer available insulating mats.
Advantages:
• Self-adhesive back
• Temperature resistant from -40 ° C to + 150 ° C
• Meets the automotive standards for fire behavior according to FMVSS302, DIN 75200
• Precise design (structure, thickness and shape) according to the original insulation mats
• True to original material
• noticeably less noise and radiant heat from the engine compartment
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 and 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1404
1404
477863771
477863772
477863772A
The product you are viewing cross references to these numbers
Price: €81.20
In stock
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 914 (1970-1976)
Information
All Porsche factory tool kits included this pulley holding wrench to be used in conjunction with the box wrench when loosening the alternator nut to replace the v-belt.
Fits:
Porsche 911 2.0L / 2.2L / 2.4L 1969-74
Porsche 914-6 1970-72
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91172170200
The product you are viewing cross references to these numbers
Fits:
Porsche 911 2.0L / 2.2L / 2.4L 1969-74
Porsche 914-6 1970-72
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91172170200
1124
91172170200
The product you are viewing cross references to these numbers
€35.96
Now €32.36
In stock
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Rear axle spring plate mount.
Porsche reference no: 477501089
Fits:
Porsche 924 1976-88
Porsche 944 / S / S2 / Turbo 1982-91
Porsche 968 1992-95
These thrust bearings are a welded steel construction with electrogalvanized and powder coated finish. They connect the rear axle tube to the body. After the years, the original thrust bearings are usually worn out and porous. There are no original replacements, and thus an overly spongy rear axle is a problem on many 924-968s.
This rigid version is suitable for both street use and motorsports.
Its advantages:
• Wearless design
• More directly guided rear axle and therefore less spongy handling.
• Elimination of rumbling noises due to worn out rubber thrust bearings.
• Excellent build quality
Thanks to the design, installation is possible without removing the rear axle!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477501089
The product you are viewing cross references to these numbers
Porsche reference no: 477501089
Fits:
Porsche 924 1976-88
Porsche 944 / S / S2 / Turbo 1982-91
Porsche 968 1992-95
These thrust bearings are a welded steel construction with electrogalvanized and powder coated finish. They connect the rear axle tube to the body. After the years, the original thrust bearings are usually worn out and porous. There are no original replacements, and thus an overly spongy rear axle is a problem on many 924-968s.
This rigid version is suitable for both street use and motorsports.
Its advantages:
• Wearless design
• More directly guided rear axle and therefore less spongy handling.
• Elimination of rumbling noises due to worn out rubber thrust bearings.
• Excellent build quality
Thanks to the design, installation is possible without removing the rear axle!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477501089
1152
477501089
95133308830
95133308832
9P-477-501-089
The product you are viewing cross references to these numbers
Price: €244.76
In stock
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
Information
Stiffener bracket (pair) for front sway bar bracket. Porsche 944, Required when fitting 944FSBA.
Fits:
Porsche 944 1985-91 with Alloy Wishbones
Porsche 944 1983-85 with steel Wishbones
Upgrade your stock or M030 front swaybar with this simple bolt in mounting brace.
Reinforces the weak factory swaybar mounting bracket by triangulating it to the front cross member.
Prevents flexing that can lead to fatigue failure of the factory bracket. Improve swaybar response by stiffening up its flexible mounting bracket.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1140
The product you are viewing cross references to these numbers
Fits:
Porsche 944 1985-91 with Alloy Wishbones
Porsche 944 1983-85 with steel Wishbones
Upgrade your stock or M030 front swaybar with this simple bolt in mounting brace.
Reinforces the weak factory swaybar mounting bracket by triangulating it to the front cross member.
Prevents flexing that can lead to fatigue failure of the factory bracket. Improve swaybar response by stiffening up its flexible mounting bracket.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1140
1140
944FSBA
94434373100
The product you are viewing cross references to these numbers
Price: €47.56
In stock
Vehicle Group
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Adjustable drop links (pair) rear.
Fits:
Porsche 944 / 924 / 968 With Factory Sway bar.
Upgrade your stock or M030 rear sway bar with this simple bolt in replacement for the factory drop links.
Adjustable length to eliminate sway bar pre-load. Eliminates the factory compliant rubber drop link bushings for improved sway bar response. Precisely connects the stock sway bar to the rear spring plate.
Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1160
The product you are viewing cross references to these numbers
Fits:
Porsche 944 / 924 / 968 With Factory Sway bar.
Upgrade your stock or M030 rear sway bar with this simple bolt in replacement for the factory drop links.
Adjustable length to eliminate sway bar pre-load. Eliminates the factory compliant rubber drop link bushings for improved sway bar response. Precisely connects the stock sway bar to the rear spring plate.
Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1160
1160
477511051A
The product you are viewing cross references to these numbers
Price: €111.36
In stock
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
These 2 coupling rods (L+R) are for the stabilizer linkage on the rear axle
for Porsche 911 G SC Stabilizer rear axle UNIBALL
Replacement for 93033307100, 93033307101, 93033307200, 93033307201
Fits:
Porsche 911 G 1978 - 1989
ONLY for the following engine codes:
911.83 / 930.09 / 930.10 / 930.19 / 930.20 / 930.21 / 930.25 / 930.26 / 930.60 / 930.66
Advantages:
• More direct response of the stabilizer
• Higher overall stiffness of the chassis
• Corrosion protection due to electrogalvanizing
• Lifetime lubrication due to brass plain bearings.
• Adjustable against each other to adjust wheel loads.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1161
The product you are viewing cross references to these numbers
for Porsche 911 G SC Stabilizer rear axle UNIBALL
Replacement for 93033307100, 93033307101, 93033307200, 93033307201
Fits:
Porsche 911 G 1978 - 1989
ONLY for the following engine codes:
911.83 / 930.09 / 930.10 / 930.19 / 930.20 / 930.21 / 930.25 / 930.26 / 930.60 / 930.66
Advantages:
• More direct response of the stabilizer
• Higher overall stiffness of the chassis
• Corrosion protection due to electrogalvanizing
• Lifetime lubrication due to brass plain bearings.
• Adjustable against each other to adjust wheel loads.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1161
1161
93033307100
93033307200
93033307101
93033307201
The product you are viewing cross references to these numbers
Price: €96.28
In stock