Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Category Filter
O-Brake
Vehicle Group
- Porsche 996 GT2 2001-05
Information
Sport brake pad set (FRONT + REAR), type black street / sport
Fits:
Porsche 996 GT2
This kit consists of the following parts:
• for the front axle: Brake pads type HTCIC-black street / sport front axle
• for the rear axle: Brake pads type HTCIC-black street / sport rear axle
We recommend the brake pads type street / sport for sporty street use - also under the (German) road traffic act. They have a material mixture making them suitable for best cold brake response up to short-time high top temperatures.
Further advantages:
- Low-noise braking
- Good modulation
- Long-lasting and disc-preserving
- Suitable for all-round use
- Intermediate deceleration values
- Low heat conductivity
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2103B2870
The product you are viewing cross references to these numbers
Fits:
Porsche 996 GT2
This kit consists of the following parts:
• for the front axle: Brake pads type HTCIC-black street / sport front axle
• for the rear axle: Brake pads type HTCIC-black street / sport rear axle
We recommend the brake pads type street / sport for sporty street use - also under the (German) road traffic act. They have a material mixture making them suitable for best cold brake response up to short-time high top temperatures.
Further advantages:
- Low-noise braking
- Good modulation
- Long-lasting and disc-preserving
- Suitable for all-round use
- Intermediate deceleration values
- Low heat conductivity
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2103B2870
210312170
210312150
210312160
2103B2870
The product you are viewing cross references to these numbers
Price: €1,039.36
Orderable
Vehicle Group
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
Information
Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 396 x 38 mm left
- Brake disc type drilled, front axle 396 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2133123
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 396 x 38 mm left
- Brake disc type drilled, front axle 396 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2133123
213312370
213312360
213312350
The product you are viewing cross references to these numbers
Prices from: €2,549.68
Vehicle Group
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
Information
Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 396 x 38 mm left
- Brake disc type drilled, front axle 396 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2133122
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 396 x 38 mm left
- Brake disc type drilled, front axle 396 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2133122
213312270
213312260
213312250
The product you are viewing cross references to these numbers
Prices from: €2,317.68
Vehicle Group
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
Information
Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 396 x 38 mm left
- Brake disc type drilled, front axle 396 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2133121
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 396 x 38 mm left
- Brake disc type drilled, front axle 396 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2133121
213312170
213312160
213312150
The product you are viewing cross references to these numbers
Prices from: €2,085.68
Vehicle Group
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Information
Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2132123
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2132123
213212370
213212360
213212350
The product you are viewing cross references to these numbers
Prices from: €2,549.68
Vehicle Group
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Information
Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 420 x 40 mm left
- Brake disc type drilled, front axle 420 x 40 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2132122
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 420 x 40 mm left
- Brake disc type drilled, front axle 420 x 40 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2132122
213112270
213112260
213112250
The product you are viewing cross references to these numbers
Prices from: €2,317.68
Vehicle Group
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Information
Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 420 x 40 mm left
- Brake disc type drilled, front axle 420 x 40 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2132121
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 420 x 40 mm left
- Brake disc type drilled, front axle 420 x 40 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2132121
213212170
213212160
213212150
The product you are viewing cross references to these numbers
Prices from: €2,085.68
Vehicle Group
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Information
Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2131123
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2131123
213112370
213112360
213112350
The product you are viewing cross references to these numbers
Prices from: €2,549.68
Vehicle Group
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Information
Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2131122
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2131122
213112270
213112260
213112250
The product you are viewing cross references to these numbers
Prices from: €2,317.68
Vehicle Group
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Information
Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2131121
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 370 x 30 mm left
- Brake disc type drilled, rear axle 370 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2131121
213112170
213112160
213112150
The product you are viewing cross references to these numbers
Prices from: €2,085.68
Vehicle Group
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
Information
Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 420 x 40 mm left
- Brake disc type drilled, front axle 420 x 40 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2130123
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 420 x 40 mm left
- Brake disc type drilled, front axle 420 x 40 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2130123
213012370
213012360
213012350
The product you are viewing cross references to these numbers
Prices from: €2,317.68
Vehicle Group
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
Information
Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2130122
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2130122
213012270
213012260
213012250
The product you are viewing cross references to these numbers
Prices from: €2,085.68
Vehicle Group
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
Information
Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 420 x 40 mm left
- Brake disc type drilled, front axle 420 x 40 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2130121
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 420 x 40 mm left
- Brake disc type drilled, front axle 420 x 40 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2130121
213012170
213012160
213012150
The product you are viewing cross references to these numbers
Prices from: €2,183.12
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
Information
Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2129123
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WAVE":
Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2129123
212912370
212912360
212912350
The product you are viewing cross references to these numbers
Prices from: €2,317.68
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
Information
Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2129122
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "WET":
Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.
Delivery period: approx. 20 working days
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2129122
212912270
212912260
212912250
The product you are viewing cross references to these numbers
Prices from: €2,085.68
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
Information
Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2129121
The product you are viewing cross references to these numbers
Made of HTCIC (High-Tech-Cast Iron-Carbon)
Characteristics "Drilled":
Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.
The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.
This kit consists of the following parts:
... for the front axle:
- Brake disc type drilled, front axle 410 x 38 mm left
- Brake disc type drilled, front axle 410 x 38 mm right
- Mounting kit retaining the original brake disc hat, front axle
... for the rear axle:
- Brake disc type drilled, rear axle 350 x 28 mm left
- Brake disc type drilled, rear axle 350 x 28 mm right
- Mounting kit retaining the original brake disc hat, rear axle
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2129121
212912170
212912160
212912150
The product you are viewing cross references to these numbers
Prices from: €1,853.68