do not press the back button…
-
Engine Parts
-
- Engine Rebuild Parts Oil System Parts Fuel System Parts Gaskets & Sets Belts / Tensioners / Rollers Chains & Tensioners Timing covers and gaskets Engine Bearings / Shells Engine Valves / Guides / Springs Rocker Arms & Tappets Engine Bolts / Studs Engine Mounts Engine Cylinders / Liners / Pistons Connecting Rod Cylinder Head / Camshaft Carrier Camshaft covers / Gaskets Crankcase Parts Crankshaft & Parts Turbo Chargers / Intercoolers & Parts Air Intake & Injection Vacuum Pump Specialist Tools
-
Brakes
-
- Brakes Brake Pads & Disc Package SPORTS Brake Pads & Disc Package Brake Disc Standard Brake Pads Standard SPORTS Brake Disc Brembo Standard brakes Brembo Racing brakes TEXTAR Brakes PAGID Racing Brakes Zimmermann Brakes EBC Brakes Black Diamond Performance Brakes Rotinger Graphite Line Replacement for Ceramic Disc Brake Pad Wear Sensors Brake Pad Anti-vibration shims Caliper Bolts / Disc Screws Pin Kit and Guide Plates Performance Brake Hoses Standard Brake Hoses Caliper and Brake Lines Brake Calipers All Categories
-
-
Suspension & Steering
-
Transmission
-
- Gearbox / Transmission Clutch Bolts Gearbox Parts Driveshafts & Parts Gasket Sets / Gaskets / Seals / Lock Nuts Gearbox Mounts Flywheel / Torque CV Joints Kits CV Boots and Kits Cardan Shaft / Prop Shaft Gearbox / Differential Oil Gearbox Sump / Oil Pan Front Differential Rear Differential Transfer Box & parts Fluid Hoses & Pipes
-
- Cooling & Heating
-
Electrical & Lighting
-
- Electrical & Relays Fuel Pumps Window Motors Window Mechanism Wiper Motor Wiper Mechanism Electric Horn SmartTop Control Units Ignition Switch Roof / Sun Roof Switch Relays / Fuses Washer pumps / bottles / jets Alarms / Security / Central Locking Electronic Control Units Dashboard / Console Parts & Switches Bonnet / Rear Lid / Spoiler Activators & Motors Air Bags & Parts Tracker Connector housing Wiring harness
-
-
Body & Exhaust
-
- Chassis / Bodywork Restoration Chassis / Repair Panels Front Lid Damper Rear Lid Damper Bonnets / Locks & Latches Boots / Rear Lid / Locks and Latches Rear lid / Tailgate Bumpers Front Bumpers Rear Door Handles | Locks | Keys Door Panels | Hinges | Striker Plates Window Lifters | Motors Wings Front & Parts Side Sill Panels Exterior Chassis Mouldings Mirrors & Parts Stone Chip Foils / Stickers Undertrays Chassis & Engine Front Wiper Arms & Blades Rear Wiper Arms & Blades Wheel Arch Liners & Covers Roof - Cabrio / Targa / Coupe / Speedster Plastic Covers All Categories
-
-
Lubricants & Fluids
-
- Service Parts Service Kits Oil Filters Air Filters Pollen/Particle Filters Belts All Types Spark Plugs Ignition Coils Front Wiper Arms & Blades Rear Wiper Arms & Blades Gearbox Service Parts Engine Oil & Lubricants - Mobil Engine Oil & Lubricants - Total Engine Oil & Lubricants - Castrol Engine Oil & Lubricants - Motul Engine Oil & Lubricants - Millers Oils NanoDrive Engine Oil & Lubricants - Millers Oils Fuel Additives Coolant / Antifreeze Garage PPE
-
-
All Parts
-
- Parts Accessories Chassis / Bodywork Brakes Clothing & Gifts Electrical & Relays Engine Cooling Engine Electrical Engine Rebuild Parts Engine Tuning Exhausts Exterior Styling / Spoilers Gearbox / Transmission Heating / Air Conditioning Hydraulics Interior & Accessories Incar / Multimedia Lighting Mats & Carpets Motorsport and Off-Road Parts for Other Cars Pedal Cluster Rubber Seals All Categories
-
- Back to main website
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Air Conditioning Pressure Line, Condenser Drier. Porsche 997 Turbo / GT2 2007-13 ❭ 99757310506
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
The Air Conditioning Pressure Line, Condenser Drier is a genuine OEM Porsche component designed to connect and regulate the flow of refrigerant between the condenser and receiver drier within the vehicle’s air-conditioning system. This line plays a key role in maintaining proper pressure and ensuring efficient moisture removal from the refrigerant circuit.
Fits:
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
Diagram Ref No 12
What This Product Does:
- Transfers refrigerant between the condenser and receiver drier
- Maintains correct system pressure for efficient cooling
- Supports moisture removal via the drier component
- Ensures consistent A/C system performance
- Prevents refrigerant loss when functioning correctly
Symptoms Of Wear Or Failure:
- Reduced or no air-conditioning performance
- Refrigerant leaks (often visible as oily residue on the line or joints)
- Hissing sounds from escaping refrigerant
- Moisture contamination in the system, leading to poor cooling efficiency
- Irregular compressor operation or failure to engage
Why Replacement Matters:
- Restores proper refrigerant flow and cooling performance
- Prevents moisture contamination that can damage internal components
- Protects the compressor and condenser from excessive strain
- Ensures correct system pressure and operation
- Maintains cabin comfort, especially in warm weather conditions
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99757310506
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
The Genuine Porsche 95B260710R air conditioning refrigerant pressure line is an OE A/C refrigerant line for selected Porsche 95B.1 Macan 2.0L models with R134a refrigerant. It helps route refrigerant through the pressure side of the air conditioning system, supports correct A/C system pressure and helps restore cooling performance when replacing a leaking, damaged or corroded refrigerant line.
Fits:
Porsche 95B.1 Macan R4 2.0 TFSI 2014 - 2018 (DM0 / DQ5)
* Vehicles with R134a refrigerant circuit (option code: KK1)
Diagram ref no 5
Air conditioning refrigerant pressure line, also described as a refrigerant line, liquid hose, A/C line or air conditioning pressure pipe - It is used on selected Porsche 95B.1 Macan 2.0L models with the R134a refrigerant circuit.
This part may also be listed as replacing previous Porsche number: 95B260710B, 95B260710F
Functions
• Carries refrigerant through the air conditioning system
• Forms part of the A/C pressure / liquid line circuit
• Helps maintain correct refrigerant flow between A/C components
• Supports efficient cabin cooling performance
• Helps maintain correct A/C system pressure when properly sealed
• Provides factory-correct pipe routing and connection fitment
• Replaces a leaking, damaged, corroded or kinked original refrigerant line
• Maintains OE Porsche air conditioning system reliability and fit.
Why Replace This Part?
A/C refrigerant pressure lines can become damaged, corroded, cracked or leak at the joints and connection points. If the line fails, the air conditioning system may lose refrigerant, causing weak cooling, warm air from the vents or complete A/C failure. Replacing the damaged line with a Genuine Porsche OE refrigerant pressure line helps restore the correct refrigerant circuit, pressure sealing and cooling performance. After installation, the A/C system should be leak-tested, evacuated and recharged by a qualified technician.
When to Replace This Part
• If the A/C system is leaking refrigerant from the line or hose connection
• If the air conditioning blows warm or does not cool correctly
• If the pipe is cracked, damaged, corroded or kinked
• If the system fails a pressure or leak test
• During A/C compressor, condenser, evaporator or hose repairs
• After accident damage or front-end repair affecting A/C pipework
• When replacing old or damaged refrigerant pipework with OE Porsche parts.
Where It Fits on the Car
This part fits in the air conditioning refrigerant circuit of the Porsche Macan. It is used as part of the A/C pressure line / liquid hose system, routing refrigerant between air conditioning components in the engine bay and front vehicle area.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B260710R
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
This OE Match air conditioning refrigerant pressure line is a replacement A/C pipe for Porsche 95B.1 Macan 2.0L models from 2014 to 2018 using R134a refrigerant. It is designed to match the original-style fitment and function, helping restore correct refrigerant flow and pressure within the air conditioning system.
Fits:
Porsche 95B.1 Macan R4 2.0 TFSI 2014 - 2018 (DM0 / DQ5)
* Vehicles with R134a refrigerant circuit (option code: KK1)
Diagram ref no 5
The refrigerant pressure line carries air conditioning refrigerant between specified A/C system components under pressure. It helps maintain correct refrigerant circulation, allowing the air conditioning system to cool the cabin efficiently and operate as intended.
This part may also be listed as replacing previous Porsche number: 95B260710B, 95B260710F
Functions
• Carries R134a refrigerant through the air conditioning system
• Helps maintain correct A/C system pressure and flow
• Supports efficient cabin cooling performance
• Connects designated air conditioning system components
• Helps prevent refrigerant leaks when correctly installed
• Replaces damaged, leaking, corroded, or worn original pressure lines
• OE Match replacement for A/C system repair and service.
Why Replace This Part?
Air conditioning refrigerant pressure lines can become damaged by corrosion, vibration, stone impact, accident damage, age, or seal failure. A leaking or damaged line can cause refrigerant loss, poor cooling, A/C pressure faults, or complete air conditioning failure. Replacing the pressure line helps restore correct refrigerant circulation and reliable climate control performance.
When to Replace This Part
• The A/C pressure line is leaking refrigerant
• The pipe is corroded, cracked, bent, or physically damaged
• The air conditioning system is not cooling correctly
• Refrigerant pressure faults are present
• Oil or dye residue is visible around the A/C pipe or joints
• The line has been damaged during engine bay or front-end repairs
• The A/C system is being serviced, repaired, or recommissioned
• The original pipework is being replaced during R134a A/C system repair.
Where it fits on the car
This refrigerant pressure line fits within the air conditioning pipework system on Porsche 95B.1 Macan 2.0L models. It connects between the specified A/C system components according to the vehicle’s factory diagram and refrigerant circuit layout.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B260710R
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
The Porsche Refrigerant Line Adapter is a genuine air conditioning system fitting designed to provide a secure connection between refrigerant lines and associated climate control components. Engineered to Porsche's exact specifications for fit, sealing performance and durability, this adapter plays a vital role in maintaining the integrity of the refrigerant circuit and ensuring efficient operation of the vehicle's air conditioning system.
Fits:
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
Diagram Ref No 5
Manufactured from high-quality corrosion-resistant materials, the adapter is designed to withstand the pressures, temperature variations and chemical exposure associated with modern refrigerant systems. It ensures a precise, leak-free connection between air conditioning components, helping maintain system pressure and cooling performance.
What This Product Does:
- Connects refrigerant lines within the air conditioning system.
- Provides a secure, leak-free interface between A/C components.
- Maintains proper refrigerant flow throughout the system.
- Supports correct operating pressures within the climate control circuit.
- Helps ensure efficient air conditioning performance.
- Prevents refrigerant loss at connection points.
- Supports reliable operation of the A/C system.
- Contributes to long-term climate control system integrity.
Symptoms Of Wear Or Failure:
- Refrigerant leaks at connection points.
- Reduced air conditioning cooling performance.
- Warm air blowing from cabin vents.
- Oily residue around A/C fittings or pipe connections.
- Frequent refrigerant recharge requirements.
- Air conditioning system pressure faults.
- Hissing noises caused by escaping refrigerant.
- Climate control warning messages or fault codes.
- Corrosion or physical damage to the adapter body.
- Inability to maintain system pressure.
Why Replacement Matters:
- Refrigerant line adapters are subjected to constant pressure fluctuations, temperature changes, vibration and long-term exposure to refrigerant oils and environmental contaminants. Over time, sealing surfaces can wear, corrosion may develop and physical damage can compromise the adapter's ability to maintain a secure connection.
- A leaking or damaged adapter can allow refrigerant to escape, reducing cooling efficiency and forcing the air conditioning compressor to work harder than intended. Continued refrigerant loss can lead to reduced climate control performance, increased wear on A/C components and potentially expensive repairs.
- Replacing a worn or damaged refrigerant line adapter restores proper sealing, maintains refrigerant system pressure and helps ensure efficient climate control operation. A genuine Porsche replacement provides factory-correct fitment, dependable sealing performance and long-term durability, helping preserve the comfort, reliability and performance of your Porsche air conditioning system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B260367B
The product you are viewing cross references to these numbers
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed