elec-TRON R3 Suspension Kit Front and Rear. Porsche 981 Cayman GT4 - NTCPO031ER3
NTCPO031ER3
Vehicle Group
- Porsche Cayman GT4 3.8L 2015-16
Information
elec-TRON R3 Suspension Kit Front and Rear.
Fits
Porsche 981 Cayman GT4 - 2015 to 2016
Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.
Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO031ER3
The product you are viewing cross references to these numbers
Fits
Porsche 981 Cayman GT4 - 2015 to 2016
Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.
Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber
BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only
Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.
Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO031ER3
98133303581
98133303585
98134304580
98134304581
98134303581
98134303582
98134303586
The product you are viewing cross references to these numbers
Price: €7,612.56
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Information
Front and rear NTR R1 suspension kit.
Fits
Porsche 993 Carrera / Carrara 4 1994 - 1998
Porsche 993 Carrera S / Carrara 4S 1995 - 1998
Porsche 993 turbo 1996 - 1998
Porsche 993 turbo S 1996 - 1998
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
NTR R1 System offers unrivalled performance and value with a design that gives drivers a wide range of effective, easy to use damping control.
2-Way combined damping adjustment.
Developed from our full race suspension and sharing many components with the R3 system, the R1 offers exceptional performance, reliability and value for both road and track use. Widely praised by drivers around the world and respected for out-performing considerably more expensive suspension kits.
R1 kits provides uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components, the R1 shock is made to last on the road and track.
The high-grade materials protect against corrosion whilst reducing weight. Every R1 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements.
Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO020R1-46
The product you are viewing cross references to these numbers
Fits
Porsche 993 Carrera / Carrara 4 1994 - 1998
Porsche 993 Carrera S / Carrara 4S 1995 - 1998
Porsche 993 turbo 1996 - 1998
Porsche 993 turbo S 1996 - 1998
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
NTR R1 System offers unrivalled performance and value with a design that gives drivers a wide range of effective, easy to use damping control.
2-Way combined damping adjustment.
Developed from our full race suspension and sharing many components with the R3 system, the R1 offers exceptional performance, reliability and value for both road and track use. Widely praised by drivers around the world and respected for out-performing considerably more expensive suspension kits.
R1 kits provides uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components, the R1 shock is made to last on the road and track.
The high-grade materials protect against corrosion whilst reducing weight. Every R1 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements.
Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO020R1-46
020R1-46
The product you are viewing cross references to these numbers
Price: €4,048.98
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Information
Front and rear NTR R3 trackday and race suspension kit.
Fits
Porsche 993 Carrera / Carrara 4 1994 - 1998
Porsche 993 Carrera S / Carrara 4S 1995 - 1998
Porsche 993 turbo 1996 - 1998
Porsche 993 turbo S 1996 - 1998
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
This kit is the hose and remote reservoir type
The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control.
3-Way independent damping adjustment
By incorporating our class leading large diameter piston and ultra-strong piston rod, the R3 system demonstrates outstanding levels of performance, damping control and adjustment.
The remotely mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car.
The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas.
The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters.
Bi-Axis Hose Fittings
NTR Hose shocks are fitted with Nitrons exclusively developed Bi-Axis fittings that allow for simple and precise installation.
R3 kits have dry-breaks on front hoses only
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO020R3-46
The product you are viewing cross references to these numbers
Fits
Porsche 993 Carrera / Carrara 4 1994 - 1998
Porsche 993 Carrera S / Carrara 4S 1995 - 1998
Porsche 993 turbo 1996 - 1998
Porsche 993 turbo S 1996 - 1998
Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
This kit is the hose and remote reservoir type
The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control.
3-Way independent damping adjustment
By incorporating our class leading large diameter piston and ultra-strong piston rod, the R3 system demonstrates outstanding levels of performance, damping control and adjustment.
The remotely mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car.
The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas.
The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters.
Bi-Axis Hose Fittings
NTR Hose shocks are fitted with Nitrons exclusively developed Bi-Axis fittings that allow for simple and precise installation.
R3 kits have dry-breaks on front hoses only
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO020R3-46
020R3-46
The product you are viewing cross references to these numbers
Price: €6,235.00
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Information
Front and rear NTR R1 suspension kit.
Fits
Porsche 993 Carrera / Carrara 4 1994 - 1998
Porsche 993 Carrera S / Carrara 4S 1995 - 1998
Porsche 993 RS - 1994 to 1997
Porsche 993 turbo 1996 - 1998
Porsche 993 turbo S 1996 - 1998
For road and track use
The Nitron NTR RoadSport system offers unrivalled performance and value with a design that gives drivers a wide range of effective and easy to use damping control.
Combined 2-way damping adjustment Developed for fast road drivers who occasionally want to take their car to the track. The NTR RoadSport kit provides exceptional performance whilst retaining the OEM top mounts to ensure OEM levels of comfort and noise.
NTR RoadSport kit gives uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components.
The ultra high-grade materials protect against corrosion whilst reducing weight.
Every NTR RoadSport kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron NTR shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO020RS
The product you are viewing cross references to these numbers
Fits
Porsche 993 Carrera / Carrara 4 1994 - 1998
Porsche 993 Carrera S / Carrara 4S 1995 - 1998
Porsche 993 RS - 1994 to 1997
Porsche 993 turbo 1996 - 1998
Porsche 993 turbo S 1996 - 1998
For road and track use
The Nitron NTR RoadSport system offers unrivalled performance and value with a design that gives drivers a wide range of effective and easy to use damping control.
Combined 2-way damping adjustment Developed for fast road drivers who occasionally want to take their car to the track. The NTR RoadSport kit provides exceptional performance whilst retaining the OEM top mounts to ensure OEM levels of comfort and noise.
NTR RoadSport kit gives uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components.
The ultra high-grade materials protect against corrosion whilst reducing weight.
Every NTR RoadSport kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.
Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
All Nitron NTR shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NTCPO020RS
99334304103
99334304137
99334304104
99334304135
99334398001
99334304107
99334304138
99334304180
9934304203
99334304237
99334304204
99333305202
99333305237
99333305180
99333305138
99333305139
The product you are viewing cross references to these numbers
Price: €3,051.79
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery