Equal length exhaust manifold with catalytic converter. Porsche 718 Boxster 4.0ltr / 981 Cayman GT4 - 9M82254017
9M82254017
Vehicle Group
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Information
9m Equal length exhaust manifold with catalytic converter.
Sold as a pair - left and right
Fits:
Porsche 718 Boxster GTS 4.0ltr- 2017 Onwards
Porsche 718 Boxster Spyder 4.0ltr - 2017 Onwards
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9M82254017
The product you are viewing cross references to these numbers
Sold as a pair - left and right
Fits:
Porsche 718 Boxster GTS 4.0ltr- 2017 Onwards
Porsche 718 Boxster Spyder 4.0ltr - 2017 Onwards
Porsche 718 Cayman GTS 4.0ltr - 2017 Onwards
Porsche 718 Cayman GT4 4.0ltr - 2017 Onwards
Made from SS304L lightweight stainless steel these exhaust manifolds offer reduced back pressure with higher flow
- Performance gains of 15hp minimum and 20nm
- Improved throttle response
- Improved exhaust note with no drone, resonation or vibration
- Direct fit no remap required but recommended
- No CEL
- Heat shielded to reduce radiant heat and speeds up exhaust gas velocity
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9M82254017
982254017C
982254017D
982254017E
982254017EX
982254018C
982254018D
982254018E
982254018EX
982254017F
982254017FX
982254018F
982254018FX
The product you are viewing cross references to these numbers
£2,495.00
Now £2,420.15
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
Exhaust Headers Cat Bybass Porsche 997 GT3 / GT3RS - DesignTek
Code: 3606309706
Vehicle Group
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
Information
DesignTek Headers Cat Bybass
Fits:
Porsche 997 GT3 / GT3RS 2007>>
High quality T304 Stainless steel equal length headers C.N.C. mandrel bent, computer numerical controlled mandrel bending equipment. The headers come complete with the provision for the before and after lambda sensors. As the vehicle will not be using the reading from these sensors the ECU will need to be re-programmed or re-mapped.
The Designtek are designed for maximum flow with no restriction. The headers are designed to produce more torque and horsepower across the Rev range. This products is designed for track cars and highly tuned vehicles
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606309706
The product you are viewing cross references to these numbers
Fits:
Porsche 997 GT3 / GT3RS 2007>>
High quality T304 Stainless steel equal length headers C.N.C. mandrel bent, computer numerical controlled mandrel bending equipment. The headers come complete with the provision for the before and after lambda sensors. As the vehicle will not be using the reading from these sensors the ECU will need to be re-programmed or re-mapped.
The Designtek are designed for maximum flow with no restriction. The headers are designed to produce more torque and horsepower across the Rev range. This products is designed for track cars and highly tuned vehicles
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606309706
99711302191
997113021AX
99711302291
997113022AX
99711302194
997113021BX
99711302197
997113021CX
99711302294
997113022BX
99711302297
997113022CX
The product you are viewing cross references to these numbers
£625.00
Now £531.25
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Sport Exhaust Center Section for 997GT3, 997GT3 RS and GT3 Cup cars DesignTek
Code: 3606609717
Vehicle Group
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
Information
DesignTek Sport Center Section for 997GT3, 997GT3 RS and GT3 Cup cars - Stainless Steel Polished with Matt Black pipes
This sports centre sections is a direct bolt on replacement, you don't even need to removal of bumper, Proprietary megaphone design- mandrel bent tubing which saves 14 lbs over the stock center section ( GT3 , RS with Ti center muffler saves 5 lbs )
Sport button remains fully functional for every day use, absolutely NO modifications. This system offers a deep aggressive exhaust note over the Porsche stock system the factory primary mufflers, catalyst and exhaust flaps are all retained
The DesignTek Sport Center Section system is a direct bolt on replacement center section which reduces weight, improves sound and offers a mild increase in performance. Porsche has done a wonderful job with the design and manufacture of the factory system with virtually no improvement to be made by installing a complete (mufflers, headers and cats) aftermarket system.
Direct bolt on replacement center section with dual 3.5 stainless tips (factory offers dual 3"). The system is made of mandrel bent T304 stainless tubing which is TIG welded and features a proprietary megaphone design to improve sound in the upper RPM range. The system saves over 14 lbs of weight over the stock ( stock gt3) and (5 lbs over GT3RS with Ti muffler), power is up 3-5 hp on average and now the sound is finally worthy of this magnificent engine.
Fits:
Porsche 997 GT3 / GT3RS 2007>>
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609717
The product you are viewing cross references to these numbers
This sports centre sections is a direct bolt on replacement, you don't even need to removal of bumper, Proprietary megaphone design- mandrel bent tubing which saves 14 lbs over the stock center section ( GT3 , RS with Ti center muffler saves 5 lbs )
Sport button remains fully functional for every day use, absolutely NO modifications. This system offers a deep aggressive exhaust note over the Porsche stock system the factory primary mufflers, catalyst and exhaust flaps are all retained
The DesignTek Sport Center Section system is a direct bolt on replacement center section which reduces weight, improves sound and offers a mild increase in performance. Porsche has done a wonderful job with the design and manufacture of the factory system with virtually no improvement to be made by installing a complete (mufflers, headers and cats) aftermarket system.
Direct bolt on replacement center section with dual 3.5 stainless tips (factory offers dual 3"). The system is made of mandrel bent T304 stainless tubing which is TIG welded and features a proprietary megaphone design to improve sound in the upper RPM range. The system saves over 14 lbs of weight over the stock ( stock gt3) and (5 lbs over GT3RS with Ti muffler), power is up 3-5 hp on average and now the sound is finally worthy of this magnificent engine.
Fits:
Porsche 997 GT3 / GT3RS 2007>>
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609717
99711102790
99711102792
99711102793
99711102797
99711102780
99711102799
55-PS115
126255
The product you are viewing cross references to these numbers
£495.00
Now £420.75
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Lambda Sensor Blanking Plug and Receiver Socket. Porsche 996 / 997
Code: 100390100392
Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
- Porsche 992 GT3 4.0L / 992 S/T 4.0L
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Information
Lambda Sensor Blanking Plug and Receiver Socket Set.
In case you need to relocate your existing lambda probe because it's not in the right location. Welding and cutting specialist required.
Fits:
Many Porsche vehicles. Universal kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
100390100392
The product you are viewing cross references to these numbers
In case you need to relocate your existing lambda probe because it's not in the right location. Welding and cutting specialist required.
Fits:
Many Porsche vehicles. Universal kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
100390100392
100390
100392
The product you are viewing cross references to these numbers
£19.50
Now £18.52
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery