Exhaust Package + Plenum 82mm Throttle Body + Induction Kit Porsche 996 C2 / C4 / C4S - POWERKIT9961
POWERKIT9961
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Information
Exhaust Package + Plenum 82mm Throttle Body + Induction Kit Porsche 996 C2 / C4 / C4S
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- Exhaust Cat back
- Sports Cats 200 cell
- Sports Headers
- Gaskets & Clamps
BIG BORE Stage 2 Performance exhaust package. High Grade stainless steel exhaust system for Porsche 996. 14 - 16 gauge T304.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Note: The Plenum is only for CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY 996 CABLE THROTTLE CARS
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POWERKIT9961
The product you are viewing cross references to these numbers
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- Exhaust Cat back
- Sports Cats 200 cell
- Sports Headers
- Gaskets & Clamps
BIG BORE Stage 2 Performance exhaust package. High Grade stainless steel exhaust system for Porsche 996. 14 - 16 gauge T304.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Note: The Plenum is only for CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY 996 CABLE THROTTLE CARS
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POWERKIT9961
97182
57-7000
3606009602
3606309601
3606109961
99611112257
99611113254
99611198404
99611113274
99611113275
99611113270
99611198405
99611113168
99611198504
99611113174
99611113175
99611113170
99611198505
99611112157
99611113154
99760511601
99711152000
99611110800
90037818301
90037810501
90038000501
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Throttle body 82mm for Porsche (99760511601/1
1 x Aluminum Intake Plenum Competition 82MM Porsche 996 / 997 (97182
1 x K&N Air Induction Kit for Porsche 996 / 997 3.6L (57-7000
1 x Exhaust Muffler / Silencer Sports DesignTek for Porsche 996 Carrera (3606009602
1 x Exhaust Manifold / Header DesignTek for Porsche 996 / 997 (3606309601
1 x Exhaust Catalytic Converter Pipes DesignTek for Porsche 996 (3606109961
2 x Exhaust sleeve catalytic converter to silencer. Porsche 996 / 997 (99711152000/1
2 x Exhaust clamp for tail pipe Porsche 996 (99611110800/1
2 x Exhaust hexagon head bolt (LONG). Porsche 996 / 997 (90037818301/1
2 x Power Steering Oil Container Bolt Porsche 987 Boxster (90037810501/1
12 x Exhaust hexagon nut. Porsche 996 / 997 (90038000501/1
Price: €3,357.44
Arriving soon
Related products
Sport Performance Package - Dual Outlet - for Porsche 911 Turbo (930) 1975-1989
Code: FSPOR911TSPKGD
Vehicle Group
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Upgrade your Porsche 911 Turbo 930 with a complete high-performance exhaust and intake system, designed to enhance power, sound, and efficiency.
Fits:
Porsche 911 Turbo (930) 1975-89
Contents:
1.) Fabspeed Stainless Steel Dual Outlet Muffler (incl. Deluxe Dual or Quad Style Tips)
2.) Fabspeed Stainless Steel Sport Headers (incl. Gaskets & Braided Oil Lines)
3.) Fabspeed Air Intake System (incl. BMC Air Filter)
Features:
- Increases horsepower and torque by 46 whp and 33 ft-lbs
- Optimized flow enhances throttle response and turbo spool
- Delivers an aggressive yet refined exhaust note
- Manufactured from T304 stainless steel
- Features 14-16 gauge C.N.C. mandrel-bent high-velocity IndyCar/Formula 1 3-into-1 pyramidal merge collectors
- Maxflo Mufflers are radius stress-relieved, hydro-formed cases and pulse TIG welded with 2000-degree ceramic fiber and stainless steel wool packing
- Includes a drip accumulator with double swivels, Aeroquip lines with adapters, and a graphite steel-layered gasket
- Comes with custom 7/8” braided oil lines with Porsche-style OEM fittings
- Air Intake Kit replaces restrictive OEM metal intake box for improved airflow
- Direct bolt-on replacement, preventing catalyst-generated check engine lights
- Backed by Fabspeed's Lifetime Warranty
Installation Information:
- A slight modification to the rear bumper is required to accommodate the dual outlet configuration.
- To ensure a proper header seal, tighten all exhaust bolts to the OEM torque specifications after the initial heat cycle.
- This system is designed for use with the factory turbocharger. If you have upgraded to a K27 turbocharger, please contact us to request the necessary modification from the supplier.
- This system can be fitted to factory 930 Flachbau (Slantnose) models with the purchase of the optional Slantnose oil line kit.
Disclaimer: This product eliminates the OEM catalytic converters from the vehicle and is strictly intended for closed-course competition and off-road use only. Racing Cat Bypass Pipes are designed exclusively for track and race cars, as they are not certified by the EPA or any regulatory emissions body. It is your responsibility to review and comply with all applicable local, state, and federal laws before purchasing and installing these or any aftermarket parts. The end-user and installer assume all risks associated with installation and use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TSPKGD
The product you are viewing cross references to these numbers
Fits:
Porsche 911 Turbo (930) 1975-89
Contents:
1.) Fabspeed Stainless Steel Dual Outlet Muffler (incl. Deluxe Dual or Quad Style Tips)
2.) Fabspeed Stainless Steel Sport Headers (incl. Gaskets & Braided Oil Lines)
3.) Fabspeed Air Intake System (incl. BMC Air Filter)
Features:
- Increases horsepower and torque by 46 whp and 33 ft-lbs
- Optimized flow enhances throttle response and turbo spool
- Delivers an aggressive yet refined exhaust note
- Manufactured from T304 stainless steel
- Features 14-16 gauge C.N.C. mandrel-bent high-velocity IndyCar/Formula 1 3-into-1 pyramidal merge collectors
- Maxflo Mufflers are radius stress-relieved, hydro-formed cases and pulse TIG welded with 2000-degree ceramic fiber and stainless steel wool packing
- Includes a drip accumulator with double swivels, Aeroquip lines with adapters, and a graphite steel-layered gasket
- Comes with custom 7/8” braided oil lines with Porsche-style OEM fittings
- Air Intake Kit replaces restrictive OEM metal intake box for improved airflow
- Direct bolt-on replacement, preventing catalyst-generated check engine lights
- Backed by Fabspeed's Lifetime Warranty
Installation Information:
- A slight modification to the rear bumper is required to accommodate the dual outlet configuration.
- To ensure a proper header seal, tighten all exhaust bolts to the OEM torque specifications after the initial heat cycle.
- This system is designed for use with the factory turbocharger. If you have upgraded to a K27 turbocharger, please contact us to request the necessary modification from the supplier.
- This system can be fitted to factory 930 Flachbau (Slantnose) models with the purchase of the optional Slantnose oil line kit.
Disclaimer: This product eliminates the OEM catalytic converters from the vehicle and is strictly intended for closed-course competition and off-road use only. Racing Cat Bypass Pipes are designed exclusively for track and race cars, as they are not certified by the EPA or any regulatory emissions body. It is your responsibility to review and comply with all applicable local, state, and federal laws before purchasing and installing these or any aftermarket parts. The end-user and installer assume all risks associated with installation and use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TSPKGD
93021102103
93021102702
93021102802
93021103301
93021103304
93011102502
93011102504
93011103700
93011103704
93011103712
93011103806
The product you are viewing cross references to these numbers
Prices from: €6,011.79
Shop Securely
12 Month Warranty
Worldwide Delivery
Vehicle Group
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Fabspeed Exhaust Manifolds / Headers
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TSHDRWH
The product you are viewing cross references to these numbers
Fits:
Porsche 930 (911) Turbo
Direct replacement for the stock headers, the stock factory headers restrict performance and are failure prone.
• 14-16 gauge T304SS, C.N.C. mandrel bent with high velocity IndyCar/Formula 1 merge collectors for optimum flow to the headers for quicker turbo spool.
• These headers will work with the stock muffler or any aftermarket muffler designed to fit like OEM.
• The system will include a drip accumulator with double swivels and Aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator. 7/8" custom braided oil lines with correct 30mm radius Porsche style ball end will be included to replace the stock oil lines.
• Hardware necessary for installation includes copper nuts for the header/manifold mounting with copper gaskets for no leaks and purges.
• The world's 100% finest, strongest, and easiest headers to install.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TSHDRWH
93021102103
93021103301
93021103304
The product you are viewing cross references to these numbers
Prices from: €3,475.36
Shop Securely
12 Month Warranty
Worldwide Delivery
Vehicle Group
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Exhaust system in stainless steel.
1 x Stainless steel painted rear muffler
2 x Stainless steel heat exchangers.
1 x Stainless steel cross over pipe.
1 x Stainless steel intermediate pipe.
Fitting kit including nuts, bolts, gaskets and strap.
Fits:
Porsche 930 3.0L / 3.3L 1975-89
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHAUSTKIT80
The product you are viewing cross references to these numbers
1 x Stainless steel painted rear muffler
2 x Stainless steel heat exchangers.
1 x Stainless steel cross over pipe.
1 x Stainless steel intermediate pipe.
Fitting kit including nuts, bolts, gaskets and strap.
Fits:
Porsche 930 3.0L / 3.3L 1975-89
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHAUSTKIT80
91104KIT
93011115500
93012319105
93033091103S
93022092203S
93011100304SS
9009100970C
93012319407m
93011116905
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Mounting Kit for Heat Exchanger. Porsche 911 1983-89 (91104KIT
1 x Exhaust Gasket. Porsche 930 Turbo 1977-89 / 965 (93012319105/1
1 x Gasket - Crossover Pipe to Turbo Inlet. Porsche 911 (930) / 964 Turbo 1975-1994 (93012319207/1
2 x Exhaust gasket. Porsche 930 Turbo / 964 Turbo (93012319407/1
1 x Exhaust cross over pipe. Porsche 911 1974-89 (93011116905/1
2 x Exhaust heat exchangers, Polished stainless steel. Porsche 930 Turbo 1975-89 (93033091103S
1 x Exhaust Muffler / Silencer Rear box. Porsche 930 Turbo 1983-89 (93022092203S
1 x Intermediate pipe turbo bypass. Porsche 930 Turbo / 964 Turbo (93011100304SS
8 x Exhaust nut. Porsche 911 1974-89 (9009100970C/1
1 x Exhaust strap. Porsche 930 Turbo (93011115502/1
Price: €4,196.52
Arriving soon