Guide bush/locking segment for handbrake cable. Porsche 356 Right Hand Drive (RHD) cars - 64424232
64424232/1
Vehicle Group
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Information
Guide bush/locking segment for handbrake cable.
The OE Match guide bush / locking segment is a replacement built to Porsche’s original specifications for 356 models. It replicates the genuine part’s fit and function, restoring smooth, secure handbrake operation and proper lever alignment within the handbrake cable assembly.
Fits:
for Right Hand Drive (RHD) cars
Porsche 356 A/540.1 1950 - 1955
Porsche 356 B / C 1950 - 1965
Porsche 356 Carrera 2000 upto 1963
Diagram ref no 9
This small but crucial component acts as both a guide and locking element for the handbrake cable system. It helps position and secure the handbrake lever, allowing smooth engagement and precise locking when the parking brake is applied. The OE Match design guarantees consistent tension, proper alignment, and dependable lever operation—just like the original Porsche part.
Over time, the original guide bush or locking segment can wear, corrode, or lose its shape, leading to poor lever engagement or handbrake slippage. Installing this OE Match replacement restores the original geometry and locking precision, ensuring secure handbrake hold, smooth release, and long-lasting reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64424232
The product you are viewing cross references to these numbers
The OE Match guide bush / locking segment is a replacement built to Porsche’s original specifications for 356 models. It replicates the genuine part’s fit and function, restoring smooth, secure handbrake operation and proper lever alignment within the handbrake cable assembly.
Fits:
for Right Hand Drive (RHD) cars
Porsche 356 A/540.1 1950 - 1955
Porsche 356 B / C 1950 - 1965
Porsche 356 Carrera 2000 upto 1963
Diagram ref no 9
This small but crucial component acts as both a guide and locking element for the handbrake cable system. It helps position and secure the handbrake lever, allowing smooth engagement and precise locking when the parking brake is applied. The OE Match design guarantees consistent tension, proper alignment, and dependable lever operation—just like the original Porsche part.
Over time, the original guide bush or locking segment can wear, corrode, or lose its shape, leading to poor lever engagement or handbrake slippage. Installing this OE Match replacement restores the original geometry and locking precision, ensuring secure handbrake hold, smooth release, and long-lasting reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64424232
64424232
The product you are viewing cross references to these numbers
Price: €14.91
In stock
Related products
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Replacement handbrake cable - short or long version.
These original Porsche cables pull the rear brakes when you lift the handbrake lever, helping hold the car stationary on inclines.
Fits:
Porsche 924S 1986 - 1988
Porsche 944 1985 - 1991
Porsche 968 1992 - 1995
Two Types:
• Short - 95142407102 - Shorter length - Inner or shorter run in the handbrake linkage assembly
• Long - 95142407202 - Longer length - Outer section or longer run of the cable, especially to reach from lever to other components
Diagram Ref No 19 (short) or 20 (long)
The handbrake cable connects the lever your hand pulls to the mechanism in the rear brakes. When you pull the lever, force is transferred via this cable to the brake shoes or calipers to lock the rear wheels. They must maintain tension, flex properly, and resist abrasion, corrosion, and stretching to work reliably.
Why Replacement Matters:
• Over time, handbrake cables can stretch, corrode, bind, or become damaged.
• A weakened or slack cable reduces braking force, may not hold the car on an incline, or require excessive lever travel.
• A cable that binds or is corroded may fail under load, compromising the parking brake’s safety.
• Proper replacement restores reliable function, ensures safety, and helps the car stay stationary when parked on slopes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95142407
The product you are viewing cross references to these numbers
These original Porsche cables pull the rear brakes when you lift the handbrake lever, helping hold the car stationary on inclines.
Fits:
Porsche 924S 1986 - 1988
Porsche 944 1985 - 1991
Porsche 968 1992 - 1995
Two Types:
• Short - 95142407102 - Shorter length - Inner or shorter run in the handbrake linkage assembly
• Long - 95142407202 - Longer length - Outer section or longer run of the cable, especially to reach from lever to other components
Diagram Ref No 19 (short) or 20 (long)
The handbrake cable connects the lever your hand pulls to the mechanism in the rear brakes. When you pull the lever, force is transferred via this cable to the brake shoes or calipers to lock the rear wheels. They must maintain tension, flex properly, and resist abrasion, corrosion, and stretching to work reliably.
Why Replacement Matters:
• Over time, handbrake cables can stretch, corrode, bind, or become damaged.
• A weakened or slack cable reduces braking force, may not hold the car on an incline, or require excessive lever travel.
• A cable that binds or is corroded may fail under load, compromising the parking brake’s safety.
• Proper replacement restores reliable function, ensures safety, and helps the car stay stationary when parked on slopes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95142407
95142407102
95142407202
The product you are viewing cross references to these numbers
Prices from: €71.10
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Replacement handbrake cable - short or long version.
These cables pull the rear brakes when you lift the handbrake lever, helping hold the car stationary on inclines. Built to OE specifications, they provide precise fit and long-lasting reliability.
Fits:
Porsche 924S 1986 - 1988
Porsche 944 1985 - 1991
Porsche 968 1992 - 1995
Two Types:
• Short - 95142407102 - Shorter length - Inner or shorter run in the handbrake linkage assembly
• Long - 95142407202 - Longer length - Outer section or longer run of the cable, especially to reach from lever to other components
Diagram Ref No 19 (short) or 20 (long)
The handbrake cable connects the lever your hand pulls to the mechanism in the rear brakes. When you pull the lever, force is transferred via this cable to the brake shoes or calipers to lock the rear wheels. They must maintain tension, flex properly, and resist abrasion, corrosion, and stretching to work reliably.
Why Replacement Matters:
• Over time, handbrake cables can stretch, corrode, bind, or become damaged.
• A weakened or slack cable reduces braking force, may not hold the car on an incline, or require excessive lever travel.
• A cable that binds or is corroded may fail under load, compromising the parking brake’s safety.
• Proper replacement restores reliable function, ensures safety, and helps the car stay stationary when parked on slopes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95142407
The product you are viewing cross references to these numbers
These cables pull the rear brakes when you lift the handbrake lever, helping hold the car stationary on inclines. Built to OE specifications, they provide precise fit and long-lasting reliability.
Fits:
Porsche 924S 1986 - 1988
Porsche 944 1985 - 1991
Porsche 968 1992 - 1995
Two Types:
• Short - 95142407102 - Shorter length - Inner or shorter run in the handbrake linkage assembly
• Long - 95142407202 - Longer length - Outer section or longer run of the cable, especially to reach from lever to other components
Diagram Ref No 19 (short) or 20 (long)
The handbrake cable connects the lever your hand pulls to the mechanism in the rear brakes. When you pull the lever, force is transferred via this cable to the brake shoes or calipers to lock the rear wheels. They must maintain tension, flex properly, and resist abrasion, corrosion, and stretching to work reliably.
Why Replacement Matters:
• Over time, handbrake cables can stretch, corrode, bind, or become damaged.
• A weakened or slack cable reduces braking force, may not hold the car on an incline, or require excessive lever travel.
• A cable that binds or is corroded may fail under load, compromising the parking brake’s safety.
• Proper replacement restores reliable function, ensures safety, and helps the car stay stationary when parked on slopes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95142407
95142407102
95142407202
The product you are viewing cross references to these numbers
Prices from: €37.02