do not press the back button…
-
Engine Parts
-
- Engine Rebuild Parts Intermediate shaft (IMS) Oil System Parts Fuel System Parts Gaskets & Sets Radial Seal / RMS / Camshaft / Balance shaft Belts / Tensioners / Rollers Chains & Tensioners Timing covers and gaskets Engine Bearings / Shells Engine Valves / Guides / Springs Rocker Arms & Tappets Engine Bolts / Studs Engine Mounts Piston Rings Engine Cylinders / Liners / Pistons Connecting Rod Cylinder Head / Camshaft Carrier Camshaft covers / Gaskets Camshafts Camshaft gears / sprockets and fixings Crankcase Parts Crankshaft & Parts All Categories
-
Brakes
-
- Brakes Brake Pads & Disc Package SPORTS Brake Pads & Disc Package Brake Disc Standard Brake Pads Standard SPORTS Brake Disc Brembo Standard brakes Brembo Racing brakes TEXTAR Brakes PAGID Racing Brakes Zimmermann Brakes Wilwood Disc Brakes EBC Brakes Black Diamond Performance Brakes Brake Pad Anti-vibration shims Caliper Bolts / Disc Screws Pin Kit and Guide Plates Performance Brake Hoses Standard Brake Hoses Caliper and Brake Lines Brake Calipers Brake Caliper Upgrades Handbrake Shoes All Categories
-
-
Suspension & Steering
-
Transmission
-
- Gearbox / Transmission Clutch Kits Clutch Kits - High Performance Clutch Friction Plate Clutch Pressure Plate Clutch Release Bearings Clutch Cables & Parts Clutch Guide Tube Clutch Ring Gear Clutch Forks & Levers Clutch Bolts Gearbox Parts Driveshafts & Parts Gasket Sets / Gaskets / Seals / Lock Nuts Gearbox Mounts Gearshift Control Parts Flywheel / Torque CV Joints Kits CV Boots and Kits Cardan Shaft / Prop Shaft Transmission Parts Gearbox / Differential Oil Gearbox Sump / Oil Pan All Categories
-
-
Cooling & Heating
-
- Heating / Air Conditioning Air con condensers & desiccators Air con evaporators & expansion valves Air con pipes Air con belts Fans & cowlings Relays / Sensors / Resistors Compressors Heater flaps Blower Motors & Fans Heater blowers Heater hoses & pipes Heater cables Vents / Grilles Climate Control Temperature Sensors / Switches Heating / Air conditioning Housings
-
-
Electrical & Lighting
-
- Electrical & Relays Fuel Pumps Brake Light Switch Hazard Warning Switch Handbrake Switch Reverse Light Switch Headlamp Switch Window Switch Window Motors Window Mechanism Wiper Motor Wiper Mechanism Electric Horn Ignition Switch Seat Switch Indicator / Wiper Stalk Switch Roof / Sun Roof Switch Relays / Fuses Washer pumps / bottles / jets Alarms / Security / Central Locking Electronic Control Units Wiper Switches Dashboard / Console Parts & Switches All Categories
-
-
Body & Exhaust
-
- Chassis / Bodywork Restoration Chassis / Repair Panels Front Lid Damper Rear Lid Damper Bonnets / Locks & Latches Boots / Rear Lid / Locks and Latches Rear lid / Tailgate Bumpers Front Bumpers Rear Door Handles | Locks | Keys Door Panels | Hinges | Striker Plates Window Lifters | Motors Wings Front & Parts Wings Rear & Parts Side Sill Panels Exterior Chassis Mouldings Mirrors & Parts Stone Chip Foils / Stickers Undertrays Chassis & Engine Front Wiper Arms & Blades Rear Wiper Arms & Blades Roof - Cabrio / Targa / Coupe / Speedster Roll Cages All Categories
-
-
Exhausts
Sport Silencers / Mufflers
1 IN / 1 OUT
Standard Silencers 1 IN / 1 OUT
Sports Silencers 1 IN / 2 OUT
Sports Silencers 2 IN / 1 OUT
Standard Silencers 2 IN / 1 OUT
Sport Silencers 2 IN / 2 OUT
Sport Silencers All Silencers / Mufflers Catalyst / Bypass Manifold / Headers Exhaust Tail Pipes All Categories
-
Exhausts
Sport Silencers / Mufflers
1 IN / 1 OUT
-
-
Lubricants & Fluids
-
- Service Parts Service Kits Service Kits OE Parts Oil Filters Air Filters Fuel Filters Belts All Types Spark Plugs IRIDIUM POWER Spark Plugs IRIDIUM RACING Spark Plugs Front Wiper Arms & Blades Rear Wiper Arms & Blades Gearbox Service Parts Porsche Classic Motor oil Engine Oil & Lubricants - Mobil Engine Oil & Lubricants - Total Engine Oil & Lubricants - Castrol Engine Oil & Lubricants - Motul Engine Oil & Lubricants - Millers Oils NanoDrive Engine Oil & Lubricants - Millers Oils Fuel Additives Garage PPE
-
-
All Parts
-
- Parts Accessories Chassis / Bodywork Brakes Clothing & Gifts Electrical & Relays Engine Cooling Engine Electrical Engine Rebuild Parts Engine Tuning Exhausts Exterior Styling / Spoilers Gearbox / Transmission Heating / Air Conditioning Hydraulics Interior & Accessories Incar / Multimedia Lighting Mats & Carpets Motorsport and Off-Road Parts for Other Cars Pedal Cluster Rubber Seals All Categories
-
- Back to main website
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Cover For Timing Case, Upper. Porsche 95B Macan 2.0L Petrol 2014-21 ❭ 95810326910
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
The Porsche Upper Timing Case Cover is a OE MATCH engine component designed to enclose and protect the upper section of the timing chain assembly. This cover forms a critical part of the engine's timing system housing, safeguarding internal timing components from contamination while helping maintain proper lubrication within the timing case.
Fits:
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
Diagram Ref No 11
The upper timing case cover provides a secure seal when installed with the appropriate gaskets and sealing components. It plays an important role in preserving the reliability and longevity of the engine's valve timing system.
What This Product Does:
- Encloses and protects the upper timing chain assembly.
- Helps retain engine oil within the timing case.
- Prevents dirt, moisture and debris from entering the timing system.
- Supports proper lubrication of timing chain components.
- Provides a mounting and sealing surface for associated engine components.
- Helps maintain correct operating conditions within the timing housing.
- Contributes to long-term engine reliability and performance.
Symptoms Of Wear Or Failure:
- Engine oil leaks from the timing cover area.
- Visible cracks or physical damage to the cover.
- Oil residue around the front or upper section of the engine.
- Deteriorated sealing surfaces.Loose or damaged mounting points.
- Contamination entering the timing case area.
- Increased engine bay oil accumulation.
- Unusual timing chain noise if contamination affects internal components.
- Premature wear of timing system components.
Why Replacement Matters:
- The timing case cover is continuously exposed to engine vibration, heat cycles, oil pressure and environmental conditions. Over time, physical damage, corrosion, impact damage or deterioration of sealing surfaces can compromise its ability to protect the timing assembly and retain engine oil.
- A leaking or damaged timing cover can allow oil to escape and contaminants to enter the timing system. If left unresolved, this may accelerate wear of timing chains, guides and tensioners while increasing the risk of lubrication-related engine damage. Oil leaks can also create engine bay contamination and contribute to reduced engine reliability.
- Replacing a damaged timing case cover restores the integrity of the timing system housing, prevents oil leaks and helps protect critical engine components from contamination.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95810326910
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
This gasket fits between the chain housing (timing cover) and engine block on classic air-cooled and early water-cooled Porsche flat-six engines - providing a durable seal that prevents oil leakage and maintains proper engine lubrication pressure.
Fits:
Porsche 911 1968 - 1989
Diagram Ref No 6
The chain housing gasket creates a precision seal between the engine’s chain housing (the cover that encloses the timing chain/sprocket area) and the crankcase. Its purpose is to:
• Prevent oil leaks: Stops engine oil from escaping the chain cover interface
• Maintain lubrication integrity: Keeps crankcase and timing drive properly pressurized
• Protect internal components: Prevents contaminants from entering the chain area
• Support engine performance: Helps preserve correct oil levels and engine efficiency
Chain housings surround critical timing and rotating components. Any oil leakage at this interface can lead to reduced lubrication, contamination of moving parts, sump oil loss, and ultimately engine damage. A proper gasket ensures sealing integrity at engine temperatures and vibration levels encountered during normal and spirited driving. Choosing a genuine Porsche OE gasket means aligning with Porsche’s original engineering intent, preventing premature failure and unnecessary rework.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93010519306
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
The OE MATCH Camshaft Cover Gasket is a high-quality replacement gasket set designed to create a reliable oil-tight seal between the camshaft covers and camshaft housings on classic Porsche engines. Manufactured to OE specifications, these gaskets help prevent oil leaks while protecting critical valve train and camshaft components from contamination.
Fits:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Diagram Ref No 11 (LEFT) Or 12 (RIGHT)
Constructed from durable, heat-resistant gasket material, the gaskets are engineered to withstand continuous exposure to engine oil, high temperatures, pressure fluctuations, and vibration. They are essential service components whenever camshaft covers are removed during maintenance, engine repairs, rebuilds, or restoration projects.
What This Product Does:
- Creates a secure seal between the camshaft covers and engine housing
- Prevents engine oil leaks from the camshaft housing area
- Maintains proper engine lubrication system integrity
- Protects internal camshaft and valve train components from contaminants
- Helps keep the engine bay clean and free from oil residue
- Supports reliable engine performance and long-term durability
Symptoms Of Wear Or Failure:
- Visible oil leaks around the camshaft covers
- Oil residue or staining on the engine exterior
- Burning oil smell from oil contacting hot engine components
- Oil dripping onto exhaust or heat exchanger surfaces
- Low engine oil levels caused by persistent leakage
- Hardened, cracked, flattened, or brittle gasket material
- Oil contamination around the valve train housing
- Excessive dirt accumulation caused by leaking oil
Why Replacement Matters:
- Restores a proper oil-tight seal within the engine assembly
- Prevents oil leaks and associated engine bay contamination
- Protects critical valve train components from dirt and debris
- Maintains correct engine oil levels and lubrication performance
- Reduces the risk of oil contacting hot exhaust components
- Supports reliable long-term engine operation
- Improves engine bay cleanliness and appearance
- Provides durable OE-quality sealing performance and long-term reliability
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93010519
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 914 (1970-1976)
Fits:
Porsche 911 1974-89*
Porsche 930 Turbo 1975-89
Porsche 914-6 1970-76
Porsche 964 Turbo 3.0L 1991-92 (M30.69)
Please note:
*For 911's 85-88 with 930.26 Engines use also longer stud M8x65: 99906204602 (QTY 2) for LEFT chain case
Click 'Zoom in' for large parts diagram.
Diagram ref no: 1 (LEFT) / 2 (RIGHT)
Price is for each.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93010506
The product you are viewing cross references to these numbers
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed