Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Your Vehicle
Porsche // 996 (911) (1997-2005) // 996 C2 3.6L 09/01-2005
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Category Filter
Lock nut for Steering rack tie rod end. Porsche 993 / 996 / 997 / 991 / Boxster / Cayman / 970 Panamera - 99908444909
99908444909/1
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Boxster Spyder / Spyder RS 718 4.0L 01/2019>>
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp) 01/2020>>
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Information
Lock nut for Steering rack tie rod end, M12 x 1,5
This OE Match lock nut is an M12 x 1.5 replacement fastening nut used on the steering rack tie rod end assembly of various Porsche models. It is designed to match the original Porsche-style fitment and provide a secure locking connection at the steering linkage.
Sold individually, 2 required per vehicle
Fits:
Porsche 993 1995 - 1998
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019
Porsche Boxster 986 1997 - 2004
Porsche Boxster 987.1 2005 - 2008
Porsche Boxster 987.2 2009 - 2012
Porsche Boxster 981 2012 - 2016
Porsche Boxster 982 (718) 2017 >>
Porsche Cayman 987C.1 2005 - 2008
Porsche Cayman 987C.2 2009 - 2012
Porsche Cayman 981C 2012 - 2016
Porsche Cayman 982C (718C) 2017 >>
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016
Diagram ref no 10
This lock nut fits on the steering linkage assembly, at the steering rack tie rod end connection. It is used to secure the tie rod end adjustment position and maintain correct steering geometry. Depending on the model, it may be used on the left or right side steering tie rod assembly.
Functions
• Secures the steering rack tie rod end in place
• Helps maintain correct steering alignment and toe adjustment
• Prevents the tie rod end from loosening during use
• Supports accurate steering control and stable handling
• Helps reduce steering play, vibration, or unwanted movement
• Provides an OE Match replacement for the original locking nut
• Suitable for steering rack, tie rod end, and alignment-related repairs
Steering lock nuts are important safety-related fasteners and can lose locking strength after removal. They may also become corroded, rounded, seized, or damaged during steering and suspension repairs. Replacing the lock nut helps ensure the tie rod end remains securely fixed and correctly adjusted after service or wheel alignment.
When to replace
• The steering rack tie rod end has been removed or replaced
• The tie rod end has been adjusted during wheel alignment
• The original nut is corroded, rounded, seized, or damaged
• The nut no longer tightens or locks securely
• There is play, looseness, or vibration in the steering linkage
• Steering rack or front suspension repairs are being carried out
• The nut has been removed and should not be reused
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99908444909
The product you are viewing cross references to these numbers
This OE Match lock nut is an M12 x 1.5 replacement fastening nut used on the steering rack tie rod end assembly of various Porsche models. It is designed to match the original Porsche-style fitment and provide a secure locking connection at the steering linkage.
Sold individually, 2 required per vehicle
Fits:
Porsche 993 1995 - 1998
Porsche 996 1998 - 2005
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019
Porsche Boxster 986 1997 - 2004
Porsche Boxster 987.1 2005 - 2008
Porsche Boxster 987.2 2009 - 2012
Porsche Boxster 981 2012 - 2016
Porsche Boxster 982 (718) 2017 >>
Porsche Cayman 987C.1 2005 - 2008
Porsche Cayman 987C.2 2009 - 2012
Porsche Cayman 981C 2012 - 2016
Porsche Cayman 982C (718C) 2017 >>
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016
Diagram ref no 10
This lock nut fits on the steering linkage assembly, at the steering rack tie rod end connection. It is used to secure the tie rod end adjustment position and maintain correct steering geometry. Depending on the model, it may be used on the left or right side steering tie rod assembly.
Functions
• Secures the steering rack tie rod end in place
• Helps maintain correct steering alignment and toe adjustment
• Prevents the tie rod end from loosening during use
• Supports accurate steering control and stable handling
• Helps reduce steering play, vibration, or unwanted movement
• Provides an OE Match replacement for the original locking nut
• Suitable for steering rack, tie rod end, and alignment-related repairs
Steering lock nuts are important safety-related fasteners and can lose locking strength after removal. They may also become corroded, rounded, seized, or damaged during steering and suspension repairs. Replacing the lock nut helps ensure the tie rod end remains securely fixed and correctly adjusted after service or wheel alignment.
When to replace
• The steering rack tie rod end has been removed or replaced
• The tie rod end has been adjusted during wheel alignment
• The original nut is corroded, rounded, seized, or damaged
• The nut no longer tightens or locks securely
• There is play, looseness, or vibration in the steering linkage
• Steering rack or front suspension repairs are being carried out
• The nut has been removed and should not be reused
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99908444909
99908444909
The product you are viewing cross references to these numbers
Price: £2.05
Arriving soon
Related products
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Information
Steering rod with ball joint
This steering component connects the steering system to the front wheel assembly, helping transmit steering input accurately and maintain correct front wheel alignment. Fits left or right side where specified
Sold individually, 1 required per side, 2 required per vehicle if replacing both sides.
Fits:
Porsche 996 1998 - 2005 all models
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012
Porsche 987C.1 Cayman 2006 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Diagram ref no 8
What This Part Does / Functions:
• Connects the steering rack / steering linkage to the front wheel hub assembly
• Transfers steering input to the front wheels
• Allows steering movement through the integrated ball joint
• Helps maintain correct toe alignment
• Supports precise steering response and handling
• Replaces a worn, loose, seized or damaged original track rod
• Helps correct play or looseness in the steering system
Why Replace This Part?
Track rods and tie rod ends are common wear items in the steering system. The ball joint is exposed to road shock, steering movement, water, dirt and general wear. Over time, the joint can develop play, the boot can split, or the threaded adjustment section can seize. A worn track rod can cause vague steering, knocking, uneven tyre wear or poor wheel alignment.
Common Symptoms of a Worn Track Rod
• Knocking or clunking from the front suspension / steering area
• Play in the steering wheel
• Loose or vague steering feel
• Uneven front tyre wear
• Vehicle pulling to one side
• Steering vibration
• Split or damaged ball joint dust boot
• Failed MOT / roadworthiness inspection due to steering joint play
• Toe alignment cannot be adjusted correctly.
When to Replace This Part
• If the ball joint has play or looseness
• If the dust boot is split or leaking grease
• If the track rod is bent, seized or damaged
• During front suspension or steering overhaul
• When replacing steering rack components
• If uneven tyre wear is caused by steering joint wear
• If the vehicle fails inspection due to track rod play
Where It Fits on the Car
This track rod fits in the front steering system, connecting the steering rack / linkage to the front wheel hub carrier area.
It fits left or right side, so the same part can be used on either side where specified.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634713105
The product you are viewing cross references to these numbers
This steering component connects the steering system to the front wheel assembly, helping transmit steering input accurately and maintain correct front wheel alignment. Fits left or right side where specified
Sold individually, 1 required per side, 2 required per vehicle if replacing both sides.
Fits:
Porsche 996 1998 - 2005 all models
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012
Porsche 987C.1 Cayman 2006 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Diagram ref no 8
What This Part Does / Functions:
• Connects the steering rack / steering linkage to the front wheel hub assembly
• Transfers steering input to the front wheels
• Allows steering movement through the integrated ball joint
• Helps maintain correct toe alignment
• Supports precise steering response and handling
• Replaces a worn, loose, seized or damaged original track rod
• Helps correct play or looseness in the steering system
Why Replace This Part?
Track rods and tie rod ends are common wear items in the steering system. The ball joint is exposed to road shock, steering movement, water, dirt and general wear. Over time, the joint can develop play, the boot can split, or the threaded adjustment section can seize. A worn track rod can cause vague steering, knocking, uneven tyre wear or poor wheel alignment.
Common Symptoms of a Worn Track Rod
• Knocking or clunking from the front suspension / steering area
• Play in the steering wheel
• Loose or vague steering feel
• Uneven front tyre wear
• Vehicle pulling to one side
• Steering vibration
• Split or damaged ball joint dust boot
• Failed MOT / roadworthiness inspection due to steering joint play
• Toe alignment cannot be adjusted correctly.
When to Replace This Part
• If the ball joint has play or looseness
• If the dust boot is split or leaking grease
• If the track rod is bent, seized or damaged
• During front suspension or steering overhaul
• When replacing steering rack components
• If uneven tyre wear is caused by steering joint wear
• If the vehicle fails inspection due to track rod play
Where It Fits on the Car
This track rod fits in the front steering system, connecting the steering rack / linkage to the front wheel hub carrier area.
It fits left or right side, so the same part can be used on either side where specified.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634713105
99634713104
99634713105
99634713103
The product you are viewing cross references to these numbers
Price: £231.16
Orderable
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Information
Track rod inner joint.
Price is for each.
Fits:
Porsche 986 Boxster 1997-05
Porsche 996 1998-05
Porsche 996 Turbo / GT2 / GT3
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 6.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634732203
The product you are viewing cross references to these numbers
Price is for each.
Fits:
Porsche 986 Boxster 1997-05
Porsche 996 1998-05
Porsche 996 Turbo / GT2 / GT3
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 6.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634732203
996.347.322.03
99634732203
99634732203
99634732203
99634732203
99634732203
4160310002
58090
The product you are viewing cross references to these numbers
Price: £165.31
Orderable
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Information
Front Bump Steer Kit.
SET OF 2
replacement for 99634713104, 99634713103, 99134713100,
Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2S, C4, C4S, Turbo, GT2, GT3
Porsche 986 Boxster / Boxster S
Porsche 987 Boxster / Boxster S
Porsche 987 Cayman / Cayman S
The RSS Adjustable Toe Steer Kit is designed for 996 and 997 models that have been lowered.
This kit will help minimize suspension geometry changes in the front of the vehicle and allow additional toe adjustment at the toe steer arm. Features heavy duty, high tolerance monoball rod
ends for precise suspension articulation with improved handling and feedback. The rod ends are also height adjustable to help reduce/eliminate bump steer.
The links are sold as a pair for the front of the car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
370
The product you are viewing cross references to these numbers
SET OF 2
replacement for 99634713104, 99634713103, 99134713100,
Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2S, C4, C4S, Turbo, GT2, GT3
Porsche 986 Boxster / Boxster S
Porsche 987 Boxster / Boxster S
Porsche 987 Cayman / Cayman S
The RSS Adjustable Toe Steer Kit is designed for 996 and 997 models that have been lowered.
This kit will help minimize suspension geometry changes in the front of the vehicle and allow additional toe adjustment at the toe steer arm. Features heavy duty, high tolerance monoball rod
ends for precise suspension articulation with improved handling and feedback. The rod ends are also height adjustable to help reduce/eliminate bump steer.
The links are sold as a pair for the front of the car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
370
99634713104
99634713103
99134713100
99634713105
99634713101
99634713102
The product you are viewing cross references to these numbers
Price: £521.00
In stock
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
Information
Front bump steer kit replaces factory steering tie rods. Price per EACH. Requires 2 per car.
Replacement for 99634713104, 99634713103, 99134713100,
Fits:
Porsche 996
Porsche 997
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
If you're serious about how your 996, 997, 986 Boxster, 987 Boxster, 987 Cayman, 991, 981 Boxster and 981 Cayman handles, you should upgrade the factory tie rods with an adjustable bump steer kit. There is one major drawback to the factory tie rods, bump steer. Bump steer results from a tie rod that is angled from the steering rack to the spindle. An angled tie rod end will have a larger horizontal travel distance than the rest of the suspension, compared to a level link. Rennline's adjustable bump steer kits solve this problem. Manufactured from 6061 aluminum and feature a turnbuckle design that allow each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. A number of spacers are also included and can be added or removed accordingly to get a level tie rod for your vehicles specific ride height. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car’s alignment settings, ensuring predictable cornering under all conditions.
Note: 2 kits required per car. Rubber Boots not included but available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S7510
The product you are viewing cross references to these numbers
Replacement for 99634713104, 99634713103, 99134713100,
Fits:
Porsche 996
Porsche 997
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
If you're serious about how your 996, 997, 986 Boxster, 987 Boxster, 987 Cayman, 991, 981 Boxster and 981 Cayman handles, you should upgrade the factory tie rods with an adjustable bump steer kit. There is one major drawback to the factory tie rods, bump steer. Bump steer results from a tie rod that is angled from the steering rack to the spindle. An angled tie rod end will have a larger horizontal travel distance than the rest of the suspension, compared to a level link. Rennline's adjustable bump steer kits solve this problem. Manufactured from 6061 aluminum and feature a turnbuckle design that allow each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. A number of spacers are also included and can be added or removed accordingly to get a level tie rod for your vehicles specific ride height. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car’s alignment settings, ensuring predictable cornering under all conditions.
Note: 2 kits required per car. Rubber Boots not included but available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S7510
99634713104
99634713103
99134713100
99634713105
99634713101
99634713102
The product you are viewing cross references to these numbers
Price: £241.00
Orderable