Short throw shifter for Porsche 911 1964-72 with 901 gearbox - NM80-901-
NM80-901-
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Information
Short throw shifter for Porsche 911 1964-72 with 901 gearbox
Fits 911 with the 901 gearbox
Comes With:
-Numeric Racing Shifter
-Numeric Racing Maintenance Free Shift Linkage
-Porsche Replacement Shift Rod Bushing
-Porsche Replacement Shift Lever Ball Socket (Part #: 91142413900)
Everything needed to completely remove all the slop from your shifting. All motion on the shifter is directly transferred to the transmission.
Features:
OEM Fitment: A direct swap and fitment from original shifter. Nothing required but a few common use tools.
Self Centering: Dual self centering springs (pictured yellow mounts, but will be black in final product). The shifter is centered automatically in the 3-4 plane (915 transmissions) or 2-3 plane (901 transmissions) or 1-2 plane (930 transmissions). No more spaghetti-like shifting or the shifter bouncing around. Multiple spring sizes gives a variety of side to side tension options based on your preference.
Throw reduction: Throw reduction of up to 40%. Use of a longer shift knob can increase the throw so it is only reduced by 30% if 40% is too much for preference. No more rowing.
Adjustable Reverse Lockout: Does your reverse gear get skimmed even with the stock reverse lockout? Our reverse lockout is adjustable so that it is dialed in perfectly to each car.
All Stainless Steel Hardware: All hardware is stainless steel and all aluminum is anodized. Rust won't be a worry with our shifters. Also, the reverse lockout and the bottom of the shifter is hardened steel for wear resistance.
Ball Bearings on Every Moving Axis: We remove all bushings and clips that hold the stock shifter in place and bare metal to metal contact for pivot with ball bearings. This is how we are able to remove all the play from the shifter and provide precise shifts.
Shift Rod Linkage:
-The ONLY aftermarket shift linkage that is maintenance free that isn't a U-Joint. Buy and install once, it isn't fun to keep adjusting this stock linkage every time you swap the bushings.
-No wear or play that is introduced from wear because we don't use plastic bushings. Any small play in this linkage is translated directly to the shifter, so get rid of the stock.
-Directly replaces OEM shift Linkage.
Disclaimer: The 2mm Spring option comes with yellow bushings instead of black
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NM80-901-
The product you are viewing cross references to these numbers
Fits 911 with the 901 gearbox
Comes With:
-Numeric Racing Shifter
-Numeric Racing Maintenance Free Shift Linkage
-Porsche Replacement Shift Rod Bushing
-Porsche Replacement Shift Lever Ball Socket (Part #: 91142413900)
Everything needed to completely remove all the slop from your shifting. All motion on the shifter is directly transferred to the transmission.
Features:
OEM Fitment: A direct swap and fitment from original shifter. Nothing required but a few common use tools.
Self Centering: Dual self centering springs (pictured yellow mounts, but will be black in final product). The shifter is centered automatically in the 3-4 plane (915 transmissions) or 2-3 plane (901 transmissions) or 1-2 plane (930 transmissions). No more spaghetti-like shifting or the shifter bouncing around. Multiple spring sizes gives a variety of side to side tension options based on your preference.
Throw reduction: Throw reduction of up to 40%. Use of a longer shift knob can increase the throw so it is only reduced by 30% if 40% is too much for preference. No more rowing.
Adjustable Reverse Lockout: Does your reverse gear get skimmed even with the stock reverse lockout? Our reverse lockout is adjustable so that it is dialed in perfectly to each car.
All Stainless Steel Hardware: All hardware is stainless steel and all aluminum is anodized. Rust won't be a worry with our shifters. Also, the reverse lockout and the bottom of the shifter is hardened steel for wear resistance.
Ball Bearings on Every Moving Axis: We remove all bushings and clips that hold the stock shifter in place and bare metal to metal contact for pivot with ball bearings. This is how we are able to remove all the play from the shifter and provide precise shifts.
Shift Rod Linkage:
-The ONLY aftermarket shift linkage that is maintenance free that isn't a U-Joint. Buy and install once, it isn't fun to keep adjusting this stock linkage every time you swap the bushings.
-No wear or play that is introduced from wear because we don't use plastic bushings. Any small play in this linkage is translated directly to the shifter, so get rid of the stock.
-Directly replaces OEM shift Linkage.
Disclaimer: The 2mm Spring option comes with yellow bushings instead of black
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
NM80-901-
NM80-901-2
NM80-901-2.5
The product you are viewing cross references to these numbers
Prices from: €864.83
Shop Securely
12 Month Warranty
Worldwide Delivery