DESIGNED FOR:
McLaren 650S / 12C / 570S / 675LT Spider
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Top Remote Control
Full automatic one-touch top operation from the original key fob.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Window positions
Window positions (up/down) after top opening programmable.
Comfort window open/close
One-Touch opening/closing of the rear window.
Signature Blinker Setup
Configure functions of the module to meet your personal preferences via our signature blinker setup menu.
Passive Mode
Turn the module off with a quick key sequence when unaltered factory operation is desired. Valet Mode
Lock the top in the closed position with a quick key sequence when needed.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using any Mac or PC.
E13 CERTIFICATION: E13 10R - 03 10070
STANDBY POWER: < 0.1MA
DUAL COLOR LEDS: YES
Shop Securely
12 Month Warranty
Worldwide Delivery
Universal Air induction kit with 6" Cone filter and alloy billet funnel
Can be adapted to various vehicles.
Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm
Shop Securely
12 Month Warranty
Worldwide Delivery
iCarsoft CR V2.0 Professional Diagnostic Tool for Multi Brand Vehicles
Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)
Contents:
CR V2.0 (1+4) Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual
Product Features
1. iCarsoft CR V2.0(1+4) can do it all-reads and clears
trouble codes on most of the systems such as engine, transmission, ABS and
airbag etc.
2. Support OBDII/EOBD Ten Modes of Operation
3. Read Live Data
4. Full
ECU Diagnosis
5. Applies to the single Brand of most of the Models which equipped
with OBDII-16 DLC
6. Easy To Use With Silicone Keys
7. Oil Light/Service Reset:
Support service lamp reset.
8. Electronic Parking Brake (EPB) system maintenance
deactivates and reactivates the EPB system for
replacement and initialization.
9. Battery Management System (BMS), registers new
battery to the BMS while battery replacement.
10. Diesel Particulate Filter (DPF)
regeneration control system, requests the DPF regeneration process while DPF
blockage and turn off the DPF indicator.
11. Electronic Throttle Control system
(ETC) relearns the throttle va value while clear or replaces the throttle
valve.
12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering
wheel to straight ahead, or recalibrates SAS while steering part
replacement.
13. ABS Bleeding, release the air to restore ABS Brake sensitivity,
or relearn while ABS replaced.
14. Injector coding, relearn the injector control
parameter while the injector renewed or replaced
15. The Print Data function
allows you printing out diagnostic data recorded by the scan
16. Battery test
allows you getting the voltage of battery with OBD port by the scan tool when
the engine starts.
17. DTC Library to lookup when user is operating this
tool.
18. Upgrade Via PC
19. Multi-language: English, German, Dutch, Spanish,
French.
OBDII Function
Shop Securely
12 Month Warranty
Worldwide Delivery