- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
- Porsche 992.1 GT3 RS 4.0L 2022-24
Built for maximum power and sound for the 992 GT3 and GT3 RS with interchangeable cat sections. Long tube runners and CNC’ed merge collectors optimize flow through the headers out to straight 3″ piping with an x-pipe for a higher pitched and smoother sound.
• Fits all Porsche 992 GT3 / GT3 RS models (2022+), and 991 Speedster
• Weighs up to 25.3 lbs / 11.4 kg less than factory exhaust components (68.2 lbs vs 42.9 lbs catless / 47.6 catted)
• Modular cat sections allows swapping from catted to catless
• Valve simulators allow for removal of factory valves without throwing a check engine light!
• All Soul Performance Products exhaust components are backed by the industry’s first and finest Lifetime Warranty for both street and track use
• Designed and built in-house at our Willow Grove, PA facility
HEADERS
For those individuals looking to maximize performance, shed over 25 lbs, and realize full sound potential a complete race system is a logical conclusion. By pursuing a full system replacement we can eliminate the restrictive cat assemblies, the “particulate filters”, and the giant 7 ⅝ connection point to the factory rear muffler assembly. A simple flange optimization to our previous generation GT3 Competition Headers allows us to get rid of the factory 991 gen connection point requiring costly OEM clamps and donut gaskets and utilize a more efficient v-band connection point.
Even a premier engineering masterpiece like the GT3 comes from Porsche fitted with exhaust manifolds restricted in terms of primary tubing length, runner diameter, and merge collection efficiency due to dense catalytic converters, mass production, and emission restriction compromises. By refining the interface between the flange/primary tubes, using smooth radius large diameter bends, and implementing performance oriented collectors with merge spikes, we have been able to achieve increased flow, response, and performance with a more aggressive exhaust note to match. A slip on merge collector was not considered to prevent any chances of exhaust leaks. Instead we focused on designing a high flow collector from CAD to CNC for a no compromise end result. This bespoke billet collector allows for maximized runner length and the elimination of several welds in the interest of durability.
REAR EXHAUST SECTION
The rear of the SOUL Race Exhaust System is optimized into a single, full 3″ flow. The design of the factory system includes very large catalytic converters terminating into a very heavy dual entry muffler with restrictive piping with variations throughout the flow path which hinder performance. Those seeking a race setup will appreciate the 25+lbs weight savings and concentration on increasing exhaust flow.
From there we dove into creating a header-back system to maintain maximum flow characteristics with a higher, smoother pitch and aggressiveness akin to an RSR race car. This full 3” diameter system is made from thick .065” wall T304L stainless steel and TIG welded with back purging to ensure it withstands hardcore track abuse. It’s also modular to allow interchanging between catless or high flow catted assemblies with minimal effect on exhaust velocity. After the catted/catless section, the exhaust flows into an X section where we took care to minimize the diameter reduction while maximizing the blend of the exhaust to create that higher smoother pitch you hear in the videos.
The electronic valve actuators can not be simply removed from the valves or else the car will throw a CEL and put it into a reduced rev limiter to 6k rpm. We have engineered valve simulators to allow removal of the valves! Simply plug the simulators into the factory valve harnesses and expect no check engine lights or issues!
SOUND
The SOUL Race Exhaust System transforms the 992 GT3’s sound into an authentic Cup Car experience. The X-pipe blend produces a higher-pitched, motorsport-style wail, delivering race-ready volume and tone that’s extreme for street use but perfectly suited for track driving. The result is an authoritative, spine-tingling exhaust note worthy of Porsche’s GT racing heritage.
POWER
Dyno testing conducted by Hydra Motor Works revealed substantial power gains:
• +23 whp / +19 ft-lbs torque with the SOUL Race Exhaust System alone
• +60 whp / +26 ft-lbs torque peak gains with the addition of a Hydra Stage 2 ECU tune
• Maximum observed gains: over +60 whp / +70 ft-lbs torque
These are exceptional results for a naturally aspirated engine—transforming throttle response, midrange pull, and top-end performance.
CONSTRUCTION
Each component is handcrafted in the USA from mandrel-bent .065″ wall T304L stainless steel. The billet 304L stainless steel head flanges and merge collectors are precision-cut on a 5-axis CNC machine for superior flow, strength, and accuracy.
All joints are TIG welded and back-purged with ARCAL™ Prime argon gas to ensure perfect weld penetration and long-term durability—essential for demanding track conditions.
CHECK ENGINE LIGHT
Because the factory catalytic converters are removed, this system may trigger a CEL. For competition use, an ECU calibration or tune is recommended.
LIFETIME WARRANTY
All SOUL exhaust components are backed by a Lifetime Warranty covering both street and track use. Our team provides prompt and professional support to resolve any issues or answer questions.
NOTE:
+ This product is not CARB certified and may not be legal for use on emissions controlled vehicles; intended for closed course competition use only
Please note: This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POR.992GT3.REC
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
DesignTek sport exhaust rear boxes are design to give a better throttle response, and also allowing the engine to breather. DesignTek exhaust sounds slightly deeper than the original Porsche standard exhaust. All DesignTek Exhaust Systems are manufactured from 14 - 16 gauge extra heavy duty T304 stainless steel, which eliminates the splitting, cracking and annoying resonance.
Fits:
Porsche 993 1994-97 (not Turbo & GT2)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009301
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design.
Fabspeed's Porsche 993 Supercup Exhaust System utilizes track-specific tuning to bring out the most aggressive sound and performance for your Carrera. Precision-made from T304L stainless steel, this exhaust will save 11 lbs. while adding 15 horsepower. Our engineers designed this exhaust to deliver its power at higher RPM ranges for ideal performance during track and motorsport events.
This exhaust installs easily without the need for adapters, cutting, or welding. Simply remove the old exhaust and bolt on this new component using the original ball-joint clamps. Included turndowns can be easily installed and removed in order to lower the exhaust volume when desired. As always, this component is backed by Fabspeed's lifetime limited warranty.
FEATURES:
• Fits: all Porsche 993 Carrera vehicles (1994-1998)
• Improves exhaust flow and sports car sound
• Adds 15 whp greatly improving throttle response
• Saves 11 bs from rear of car
• Optimized for use at high-RPM during track and motorsport events
• Complete T304L stainless steel construction; 14-16ga CNC mandrel-bent 2.25" tubing
• Direct replacement for the factory mufflers
• Includes removable turndowns that are "easy on & easy off" for lowering the exhaust volume when desired
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
• DISCLAIMER: The original factory ball-joint clamps must be re-used when installing Fabspeed exhaust products on all 993 Carrera vehicles.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR993SCUP
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Fits: all Porsche 993 Carrera vehicles 1994-1998 - 3.6 liter / 3.8 liter and engines
Fabspeed's RSR Header Muffler Kit is a full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange. Works great on street cars too. This Header/Muffler kit is built from the ground up to optimize performance for the Porsche 993 Carrera. Beyond just improving horsepower, torque, and throttle response, this package will also reduce the overall weight of your car by 43 pounds, which improves handling and acceleration.
SOUND:
This kit is designed specifically for use on the track, but works well for street drivers who want an aggressive and track-inspired exhaust note.
POWER:
We developed every inch of it to bring out the aggressive performance that the Carrera is capable of. On our dyno we saw gains of 29whp and 25ft/lbs of tq.
FEATURES:
• Loud and aggressive cup car sound
• 1.75" / 45mm Header tubes, 26" long
• This system can be ordered with single or double outlets
• Maintain your factory in-cabin heat with the optional heat exchange on the headers
• Saves 43lbs from the rear of the vehicle with heat exchange option, and saves 47lbs without heat exchange option
• Constructed from mandrel bent T304L stainless steel
• Simple DIY bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
NOTE:
This package can be purchased with a heat exchange on the headers that will help maintain the factory in-cabin heat. Without the exchange system, you'll save an additional 4 lbs, for a total of 47 pounds of weight reduction.
PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR993RSRWOH
The product you are viewing cross references to these numbers