Top Mounts KIT Sealed Camber Plates for Porsche 997 2WD - SUSPENSIONKIT09
SUSPENSIONKIT09
Vehicle Group
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
Information
Top Mounts KIT
Ultimate replacement for factory rubber bush mount. Compatible with OE and aftermarket struts. Mounting holes allow for more than 1 deg of extra negative camber. CNC machined 6061 black anodized aluminum construction with stainless steel hardware. Reduces front wheel camber changes during hard cornering to maintain optimum tire contact for improved traction.
Ultimate replacement for factory rubber bush mount. Compatible with OE and aftermarket struts. Mounting holes allow for more than 1 deg of extra negative camber. CNC machined 6061 black anodized aluminum construction with stainless steel hardware. Reduces front wheel camber changes during hard cornering to maintain optimum tire contact for improved traction.
Fits:
Porsche 997.1 C2 / C2S
Porsche 997.2 C2 / C2S
About kit
This kit is comprised of the following items:
1 x Front monoball shock top mount - Set of 2 for Porsche 996 / 997 / 986 / 987 (360250996F
1 x Rear monoball shock top mount - Set of 2 for Porsche 997 (360250997R
€772.31
Now €656.46
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
Rennline Clubsport Camber Plate Top Mount Set for Porsche 991/981
Code: S54
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Information
Rennline Clubsport Camber Plate Top Mount Set.
SET OF 2
Fits:
Porsche 991/981/718 2WD except GT3/GT4
Whether you use your car on the street or the track, optimum camber settings are critical for both performance and tire wear during spirited street driving and at the track. These plates were designed for 991/981 owners looking to achieve additional camber without needing to change to GT3-style adjustable control arms. By using an offset bearing housing, the range of possible camber adjustment is shifted to provide an additional 1.1 degrees of camber at all OEM-equivalent settings.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed specifically for cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber in your 991/981 car. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.
• 1.1* increase in negative camber at factory settings results in greater range of adjustment
• CNC machined housings
• Fully compatible with factory and aftermarket shock/spring kits utilizing factory mounts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S54
The product you are viewing cross references to these numbers
SET OF 2
Fits:
Porsche 991/981/718 2WD except GT3/GT4
Whether you use your car on the street or the track, optimum camber settings are critical for both performance and tire wear during spirited street driving and at the track. These plates were designed for 991/981 owners looking to achieve additional camber without needing to change to GT3-style adjustable control arms. By using an offset bearing housing, the range of possible camber adjustment is shifted to provide an additional 1.1 degrees of camber at all OEM-equivalent settings.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed specifically for cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber in your 991/981 car. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.
• 1.1* increase in negative camber at factory settings results in greater range of adjustment
• CNC machined housings
• Fully compatible with factory and aftermarket shock/spring kits utilizing factory mounts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S54
99134301502
982199131
982199131D
The product you are viewing cross references to these numbers
€899.64
Now €854.66
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Rennline Race Spec Camber Plate FRONT Top Mount Set for Porsche 991 / 981 / 718
Code: S55
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Information
Rennline Race Spec Camber Plate FRONT Top Mount Set.
SET OF 2
Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT
If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.
this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.
• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S55
The product you are viewing cross references to these numbers
SET OF 2
Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT
If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.
this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.
• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S55
99134301502
982199131D
982199131
The product you are viewing cross references to these numbers
€753.27
Now €715.61
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Offset camber plates. Porsche 981 / 718 / 991
Code: 21522
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
Information
Offset camber plates.
Sold as a pair - 1 pair, required per car
Fits Front
Porsche 981 Boxster and Cayman
Porsche 718 Boxster and Cayman
Porsche 991 Carrera, Carrera 4
Porsche 991 Carrera S, Carrera 4S
More Camber and Caster
Our offset front camber plates allow for additional camber and castor over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory type struts, including those equipped with PASM.
These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The Teflon lined spherical bearings used in our kit are entirely maintenance free and require no supplemental lubrication. These plates are sealed to prevent contamination from water or grime, thus extending bearing life. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended abuse on the race track.
Higher Performance
Spherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons
– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Use Stock Springs or Coilovers
Fully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21522
The product you are viewing cross references to these numbers
Sold as a pair - 1 pair, required per car
Fits Front
Porsche 981 Boxster and Cayman
Porsche 718 Boxster and Cayman
Porsche 991 Carrera, Carrera 4
Porsche 991 Carrera S, Carrera 4S
More Camber and Caster
Our offset front camber plates allow for additional camber and castor over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory type struts, including those equipped with PASM.
These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The Teflon lined spherical bearings used in our kit are entirely maintenance free and require no supplemental lubrication. These plates are sealed to prevent contamination from water or grime, thus extending bearing life. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended abuse on the race track.
Higher Performance
Spherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons
– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Use Stock Springs or Coilovers
Fully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21522
2152207
2152211
99134301502
The product you are viewing cross references to these numbers
Prices from: €847.87
Shop Securely
12 Month Warranty
Worldwide Delivery