Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Sub5Club Store
https://www.pitp.club
https://www.pitp.club
https://www.pitp.club
-
Engine Parts
-
- Engine Electrical Batteries & Chargers Ignition Coil Speed / Reference / Knock Sensors
-
- Engine Rebuild Parts Oil System Parts Fuel System Parts Gaskets & Sets Radial Seal / RMS / Camshaft / Balance shaft Belts / Tensioners / Rollers Chains & Tensioners Engine Bearings / Shells Rocker Arms & Tappets Engine Bolts / Studs Engine Mounts Engine Cylinders / Liners / Pistons Connecting Rod Camshaft covers / Gaskets Camshaft gears / sprockets and fixings Crankcase Parts Crankshaft & Parts Turbo Chargers / Intercoolers & Parts Specialist Tools
-
Brakes
-
- Brakes Brake Pads & Disc Package Brake Disc Standard Brake Pads Standard Brembo Standard brakes Brembo Racing brakes TEXTAR Brakes PAGID Racing Brakes Zimmermann Brakes Brake Pad Anti-vibration shims Caliper Bolts / Disc Screws Pin Kit and Guide Plates Performance Brake Hoses Standard Brake Hoses Caliper and Brake Lines Brake Calipers Brake Caliper Upgrades Handbrake Shoes Electric parking brake ABS | Speed Sensors Caliper Seals |Pistons Brake Servo | Booster Brake Master Cylinder All Categories
-
-
Suspension & Steering
-
- Steering Parts Steering Gaiter Track Rods
-
-
Transmission
-
- Gearbox / Transmission Clutch Kits Gearbox Parts Driveshafts & Parts Gasket Sets / Gaskets / Seals / Lock Nuts Gearbox Mounts Gearshift Control Parts Flywheel / Torque CV Joints Kits CV Boots and Kits Cardan Shaft / Prop Shaft Transmission Parts Gearbox / Differential Oil Gearbox Sump / Oil Pan Front Differential Rear Differential Transmission Cooling
-
-
Cooling & Heating
-
- Heating / Air Conditioning Air con pipes Compressors Temperature Sensors / Switches
-
-
Electrical & Lighting
-
Body & Exhaust
-
- Chassis / Bodywork Restoration Chassis / Repair Panels Front Lid Damper Bonnets / Locks & Latches Boots / Rear Lid / Locks and Latches Bumpers Front Bumpers Rear Door Handles | Locks | Keys Door Panels | Hinges | Striker Plates Mirrors & Parts Stone Chip Foils / Stickers Undertrays Chassis & Engine Front Wiper Arms & Blades Roof - Cabrio / Targa / Coupe / Speedster Plastic Covers Sound Proofing Engine Covers Front screen Rear screen Rear side glass Fastenings & Fixings
-
-
Lubricants & Fluids
-
- Service Parts Oil Filters Air Filters Pollen/Particle Filters Spark Plugs Front Wiper Arms & Blades Rear Wiper Arms & Blades Gearbox Service Parts Engine Oil & Lubricants - Mobil Engine Oil & Lubricants - Total Engine Oil & Lubricants - Castrol Engine Oil & Lubricants - Motul Engine Oil & Lubricants - Millers Oils NanoDrive Engine Oil & Lubricants - Millers Oils Fuel Additives Garage PPE
-
-
All Parts
-
- Parts Accessories Chassis / Bodywork Brakes Clothing & Gifts Electrical & Relays Engine Cooling Engine Electrical Engine Rebuild Parts Engine Tuning Exhausts Exterior Styling / Spoilers Gearbox / Transmission Heating / Air Conditioning Interior & Accessories Incar / Multimedia Lighting Mats & Carpets Motorsport and Off-Road Pedal Cluster Rubber Seals Seats & Seat Belts Service Parts All Categories
-
- Back to main website
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Category Filter
Porsche
>
992 (911) MK1 2019-2024
>
992.1 (911) Sport Classic 3.8L 2023
>
Engine Rebuild Parts
>
Engine Cylinders / Liners / Pistons
>
Wössner Pistons
>
Wössner forged piston kit. Porsche 996 (911) Carrera / (911) Carrera 4 & 4s 3.6 24v ❭ K9473
Wössner forged piston kit. Porsche 996 (911) Carrera / (911) Carrera 4 & 4s 3.6 24v - K9473
K9473
Vehicle Group
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Information
Wössner forged piston kit.
Fits:
Porsche 996 911 Carrera / 911 Carrera 4 & 4s 3.6 24v
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9473
Engine Type: M96.03
OE Bore Size: 96.00mm
Bore Sizes Available:
- 96.00mm - 3595.95cc, Compression Ratio: 11.3:1
- 96.50mm - 3633.50cc, Compression Ratio: 11.4:1
- 97.00mm - 3671.26cc, Compression Ratio: 11.3:1
Bore Size 96.00mm
Piston Size: 95.93mm
Over Size: 0mm
Displacement CC: 3595cc
Dome / Bowl Volume: -11cc
Wössner Comp Ratio: 11.3:1
Ring Part Number: 960XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 96.50mm
Piston Size: 96.43mm
Over Size: 0.5mm
Displacement CC: 3633cc
Dome / Bowl Volume: -11cc
Wössner Comp Ratio: 11.4:1
Ring Part Number: 965XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 97.00mm
Piston Size: 96.93mm
Over Size: 1mm
Displacement CC: 3671cc
Dome / Bowl Volume: -11cc
Wössner Comp Ratio: 11.3:1
Ring Part Number: 970XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 82.8mm
Dome/Bowl Volume: -11cc
OE Comp. Ratio: 11.3:1
Comp. Height: 33mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
K9473
The product you are viewing cross references to these numbers
Fits:
Porsche 996 911 Carrera / 911 Carrera 4 & 4s 3.6 24v
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9473
Engine Type: M96.03
OE Bore Size: 96.00mm
Bore Sizes Available:
- 96.00mm - 3595.95cc, Compression Ratio: 11.3:1
- 96.50mm - 3633.50cc, Compression Ratio: 11.4:1
- 97.00mm - 3671.26cc, Compression Ratio: 11.3:1
Bore Size 96.00mm
Piston Size: 95.93mm
Over Size: 0mm
Displacement CC: 3595cc
Dome / Bowl Volume: -11cc
Wössner Comp Ratio: 11.3:1
Ring Part Number: 960XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 96.50mm
Piston Size: 96.43mm
Over Size: 0.5mm
Displacement CC: 3633cc
Dome / Bowl Volume: -11cc
Wössner Comp Ratio: 11.4:1
Ring Part Number: 965XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 97.00mm
Piston Size: 96.93mm
Over Size: 1mm
Displacement CC: 3671cc
Dome / Bowl Volume: -11cc
Wössner Comp Ratio: 11.3:1
Ring Part Number: 970XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 82.8mm
Dome/Bowl Volume: -11cc
OE Comp. Ratio: 11.3:1
Comp. Height: 33mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
K9473
99610305209
99610305210
99610305219
99610305220
The product you are viewing cross references to these numbers
K9473 Size Options:
Prices from: €1,422.86
Back to top
You have been successfully signed up to our mailing list
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
© 2025 Sub5Club Store. All rights reserved. | Powered by Datadial
Price Match Guarantee
Worldwide Delivery
12 Month Warranty