Price Match Guarantee
Worldwide Delivery
12 Month Warranty
Specialist Tools
Filter by brand
Engine case splitter for Porsche 911
Code: SR124
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
Information
Stomski Racing SR124 Engine case splitter for Porsche 911
No more hammering, chiseling, swearing, heating, prying or praying to get an 911 engine case apart. STOMSKI RACING'S SR124 ELEGANTLY and GENTLY separates the engine case halves and not only shortens the process of engine tear-down, but it also protects what doubtlessly is an expensive asset- the engine case itself. The rare #s matching early 911S sand-cast aluminum case, or the impossible to find 911 GT3 RSR case, or the early magnesium case that seems so fragile, all can NOW be protected from the threat of the block of wood and lead hammer, or the torch, or the pry-bar and chisel.
SR124 includes a CNC precision machined aluminum platform that you bolt to four head studs (ideally over #2 or #5) using the included thumbscrews. An over-sized drive-screw (stainless steel) is then threaded through the platform to mate with a high-load bearing in our specially designed rod cap that presses against the wrist pin of #2 or #5 connecting rod that is at bottom-dead-center. As you slowly use a wrench or ratchet to tighten the drive-screw, the torque of the SR124 splitter is evenly distributed through the entire crankshaft, pressing against ALL 8 main bearings. Once the slack is taken up, only GENTLE effort on the drive screw is required to split even the most belligerent of cases.
The SR124 platform is designed to work on all Mezger 911s (2.0 through 997) and includes Delrin inserts/sleeves that protect the head studs from scratches or dings.
No more hammering, chiseling, swearing, heating, prying or praying to get an 911 engine case apart. STOMSKI RACING'S SR124 ELEGANTLY and GENTLY separates the engine case halves and not only shortens the process of engine tear-down, but it also protects what doubtlessly is an expensive asset- the engine case itself. The rare #s matching early 911S sand-cast aluminum case, or the impossible to find 911 GT3 RSR case, or the early magnesium case that seems so fragile, all can NOW be protected from the threat of the block of wood and lead hammer, or the torch, or the pry-bar and chisel.
SR124 includes a CNC precision machined aluminum platform that you bolt to four head studs (ideally over #2 or #5) using the included thumbscrews. An over-sized drive-screw (stainless steel) is then threaded through the platform to mate with a high-load bearing in our specially designed rod cap that presses against the wrist pin of #2 or #5 connecting rod that is at bottom-dead-center. As you slowly use a wrench or ratchet to tighten the drive-screw, the torque of the SR124 splitter is evenly distributed through the entire crankshaft, pressing against ALL 8 main bearings. Once the slack is taken up, only GENTLE effort on the drive screw is required to split even the most belligerent of cases.
The SR124 platform is designed to work on all Mezger 911s (2.0 through 997) and includes Delrin inserts/sleeves that protect the head studs from scratches or dings.
£349.60
Now £332.12
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Engine head stud height setter for Porsche 911
Code: SR099
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Information
Head stud height setter for Porsche 911
Precisely set the height of head studs on all the 911 engines using this innovative tool. The Delrin insert protects the engine case from scratches or marring, while the adjustable three-piece anodized aluminium tubular construction provides complete flexibility for all engine setups, tools, and stud combinations.
For all 911s including GT3s.
Precisely set the height of head studs on all the 911 engines using this innovative tool. The Delrin insert protects the engine case from scratches or marring, while the adjustable three-piece anodized aluminium tubular construction provides complete flexibility for all engine setups, tools, and stud combinations.
For all 911s including GT3s.
£123.12
Now £116.96
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Engine Piston / case squirter cleaner for Porsche 911
Code: SR052
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Piston / case squirter cleaner for Porsche 911
At last an easy way to clean and check the case/piston squirters on 911 cases. Use this precise tool with compressed air and your air gun to force the squirters open and clean them out. This tool seals the galley off at each end and allows the air to be pushed through the squirter orifice. No need to remove/replace squirters or guess whether they are clear.
Anodized aluminum/brass.
Available with or without an air gun.
At last an easy way to clean and check the case/piston squirters on 911 cases. Use this precise tool with compressed air and your air gun to force the squirters open and clean them out. This tool seals the galley off at each end and allows the air to be pushed through the squirter orifice. No need to remove/replace squirters or guess whether they are clear.
Anodized aluminum/brass.
Available with or without an air gun.
Prices from: £77.98
Shop Securely
12 Month Warranty
Worldwide Delivery
Engine stand for engine mount. Porsche 356 911 F/G 914 993 997T
Code: 6898
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Information
Engine stand for engine mount.
Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996 turbo/GT2/GT3
Porsche 997 turbo/GT2/GT3
The pickup tube is D=60mm in outer diameter
Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201
For the revision of your Porsche engine, we offer this engine mount. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand. Alternatively, you can use the engine mount to mount the engine to a workbench using a bearing block. We have the engine stands for all classic Porsches with and without a mounting stand in our program.
Notice: The colour of the part may differ from the colour shown.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6898
The product you are viewing cross references to these numbers
Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996 turbo/GT2/GT3
Porsche 997 turbo/GT2/GT3
The pickup tube is D=60mm in outer diameter
Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201
For the revision of your Porsche engine, we offer this engine mount. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand. Alternatively, you can use the engine mount to mount the engine to a workbench using a bearing block. We have the engine stands for all classic Porsches with and without a mounting stand in our program.
Notice: The colour of the part may differ from the colour shown.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6898
6898
The product you are viewing cross references to these numbers
£445.00
Now £422.75
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Exhaust head stud repair kit for Porsche Air-cooled 911’s
Code: SR065
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Information
Exhaust head stud repair kit for Porsche Air-cooled 911's
Never lose sleep again over a bent or broken exhaust stud on a 911 engine. This new tool is a must for every 911 mechanic and will pay for itself the first time you use it. This is a quick and totally accurate tool to repair and replace broken studs without damaging the head, or worse, having to remove the engine. The SR065 fixture indexes off of the exhaust port (by using one of the various sized port bushings included), secures to the opposite stud, and allows you to drill out, tap, and replace the stud dead on, every time. Includes LH drill bits, tap with extension, drill jigs/guides, port bushings, and a sturdy storage case.
Now includes our SR065D drill guide.
Fits ALL of the 911 heads including the 993.
Never lose sleep again over a bent or broken exhaust stud on a 911 engine. This new tool is a must for every 911 mechanic and will pay for itself the first time you use it. This is a quick and totally accurate tool to repair and replace broken studs without damaging the head, or worse, having to remove the engine. The SR065 fixture indexes off of the exhaust port (by using one of the various sized port bushings included), secures to the opposite stud, and allows you to drill out, tap, and replace the stud dead on, every time. Includes LH drill bits, tap with extension, drill jigs/guides, port bushings, and a sturdy storage case.
Now includes our SR065D drill guide.
Fits ALL of the 911 heads including the 993.
£351.12
Now £333.56
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Input shaft flange nut socket for Porsche 911
Code: SR252
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Information
Input shaft flange nut socket for Porsche 911
STOMSKI RACING's version of the socket to remove/install the input shaft flange nut on the 901/911 (SR252) or 915/930 (SR252A) transmissions allows you to secure the input shaft using either end of the input shaft by mounting it to a factory tool (such as P256 from the first-gear end of the shaft) or a by using a clutch disk mounted in a vice.
Moreover, unlike the factory-style long-tube socket, with SR252 and SR252A there is less tendency to want to leverage away from the centerline of the input shaft. High quality impact-grade socket and hardened steel weldment with black oxide finish.
• SR252 for 901/911/914 transmissions.
• SR252A for 915/930 transmissions.
Each sold separately/individually.
STOMSKI RACING's version of the socket to remove/install the input shaft flange nut on the 901/911 (SR252) or 915/930 (SR252A) transmissions allows you to secure the input shaft using either end of the input shaft by mounting it to a factory tool (such as P256 from the first-gear end of the shaft) or a by using a clutch disk mounted in a vice.
Moreover, unlike the factory-style long-tube socket, with SR252 and SR252A there is less tendency to want to leverage away from the centerline of the input shaft. High quality impact-grade socket and hardened steel weldment with black oxide finish.
• SR252 for 901/911/914 transmissions.
• SR252A for 915/930 transmissions.
Each sold separately/individually.
Prices from: £161.73
Shop Securely
12 Month Warranty
Worldwide Delivery
Leak-down / compression adapter for Porsche 911
Code: SR03
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Leak-down / compression adapter for Porsche 911
You no longer need to fight or snake a flexible rubber hose blindly through the valve cover and into the cylinder head to hook up a compression or leak down gauge on the 911 engines (or other engines with remote spark plugs). Simply insert this unique tool into the spark plug hole of the cylinder head and attach your gauge. Precisely machined from high quality stainless steel or hard-coated aluminum.
Available in two sizes based on spark plug thread/diameter.
Sold separately.
You no longer need to fight or snake a flexible rubber hose blindly through the valve cover and into the cylinder head to hook up a compression or leak down gauge on the 911 engines (or other engines with remote spark plugs). Simply insert this unique tool into the spark plug hole of the cylinder head and attach your gauge. Precisely machined from high quality stainless steel or hard-coated aluminum.
Available in two sizes based on spark plug thread/diameter.
Sold separately.
Prices from: £69.31
Shop Securely
12 Month Warranty
Worldwide Delivery
Mechanical chain tensioners, Set of 2 for Porsche 911
Code: SR011
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Mechanical chain tensioners, Set of 2 for Porsche 911
Use these specially designed and fabricated mechanical tensioners to set cam timing, or as a bullet-proof alternative to pressure fed or hydraulic tensioners for racing.
CNC machined from 6061 aluminum and anodized for protection, these will become an integral part of your tool box or race engine. Complete with tensioning bolts, locking nuts, and spacers.
Comes in a set of TWO.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR011
The product you are viewing cross references to these numbers
Use these specially designed and fabricated mechanical tensioners to set cam timing, or as a bullet-proof alternative to pressure fed or hydraulic tensioners for racing.
CNC machined from 6061 aluminum and anodized for protection, these will become an integral part of your tool box or race engine. Complete with tensioning bolts, locking nuts, and spacers.
Comes in a set of TWO.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR011
93010505304
93010505803
93010591199
The product you are viewing cross references to these numbers
£115.52
Now £109.74
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Mounting bolt kit for engine & gearbox stand
Code: SR028
Information
Mounting bolt kit for engine & gearbox stand
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
£65.36
Now £62.09
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Oil cooler tester for Porsche 911
Code: SR009
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Oil cooler tester for Porsche 911
No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR009
The product you are viewing cross references to these numbers
No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR009
90110704103
91110704102
The product you are viewing cross references to these numbers
£148.96
Now £141.51
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997
Code: SR108
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 914 (1970-1976)
Information
Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997
Tolerance between the pressure relief plug and its galley are very close, and the slightest bit of gunk, corrosion, or bur will cause the plug to freeze up in the oil passage. A magnet is rarely powerful enough to overcome the seized plug, and leaving it in place is never an option.
Using STOMSKI RACING's Oil Pressure Relief Plug Extractor makes the task of removing the stuck plug a breeze, and allows you to ensure clean oil passages, and a properly operating bypass system.
The collet-based tool slides easily into the open end of the seized plug and a simple turn or two of the internal socket head cap screw expands the tool, grasping the plug to ensure easy removal.
Anodized Aluminum.
Tolerance between the pressure relief plug and its galley are very close, and the slightest bit of gunk, corrosion, or bur will cause the plug to freeze up in the oil passage. A magnet is rarely powerful enough to overcome the seized plug, and leaving it in place is never an option.
Using STOMSKI RACING's Oil Pressure Relief Plug Extractor makes the task of removing the stuck plug a breeze, and allows you to ensure clean oil passages, and a properly operating bypass system.
The collet-based tool slides easily into the open end of the seized plug and a simple turn or two of the internal socket head cap screw expands the tool, grasping the plug to ensure easy removal.
Anodized Aluminum.
£54.72
Now £51.98
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Oil return tube o-ring installer for Porsche 911
Code: SR027
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Oil return tube o-ring installer for Porsche 911
With this high-quality anodized aluminum tool, you will no longer have to worry about slicing the oil return tube O-rings or your fingers when installing these tight fitting seals. Simply insert the flanged end of the SR027 into the oil return tube, and slide the O-ring over the tapered end, sliding smoothly into place. No rips. No tears. No leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR027
The product you are viewing cross references to these numbers
With this high-quality anodized aluminum tool, you will no longer have to worry about slicing the oil return tube O-rings or your fingers when installing these tight fitting seals. Simply insert the flanged end of the SR027 into the oil return tube, and slide the O-ring over the tapered end, sliding smoothly into place. No rips. No tears. No leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR027
93010704001
93010704001
93010704001
90110735101
90110735101
The product you are viewing cross references to these numbers
£47.12
Now £44.76
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Precision shift coupler for Porsche 911 Gearbox type 901/911/912/915/930
Code: SR010
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
901/911/912/915/930 Precision shift coupler for Porsche 911
Our high quality, precisely engineered coupler ends sloppy shifting caused by worn (and even new!) factory couplers. Fabricated to exacting tolerances, the SR010 provides a precision feel and allows for accurate shifting. No more missed shifts during the heat of battle because of a sloppy factory coupler. The SR010 provides the precision and accuracy you demand when down shifting into that high-speed turn. No need to worry whether you are going to hit the wrong gear and over rev your engine. A quick bolt on replacement for the factory part. Shift with confidence, shift with precision. Available for 901/911/912/915/930.
Also available with our Shift Coupler Clamp (SR151) and/or shift bushing set (1 each of the Shift Tube Bushing and the Ball Cup Bushing).
For Installation Instructions please CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR010
The product you are viewing cross references to these numbers
Our high quality, precisely engineered coupler ends sloppy shifting caused by worn (and even new!) factory couplers. Fabricated to exacting tolerances, the SR010 provides a precision feel and allows for accurate shifting. No more missed shifts during the heat of battle because of a sloppy factory coupler. The SR010 provides the precision and accuracy you demand when down shifting into that high-speed turn. No need to worry whether you are going to hit the wrong gear and over rev your engine. A quick bolt on replacement for the factory part. Shift with confidence, shift with precision. Available for 901/911/912/915/930.
Also available with our Shift Coupler Clamp (SR151) and/or shift bushing set (1 each of the Shift Tube Bushing and the Ball Cup Bushing).
For Installation Instructions please CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR010
91142402404
The product you are viewing cross references to these numbers
£247.76
Now £235.37
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Removal tool injectors filter. Porsche 911 / 996 / 924S / 944 / 968
Code: 5167
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Removal tool injectors filter.
Fits:
Porsche 911
Porsche 996
Porsche 924S
Porsche 944
Porsche 968
Description:
With this special tool, the filters of the injectors can be removed quickly, cleanly and effectively. In addition, the tool has a centering syringe on the head side, with which the new filter can be pressed straight into the injection nozzle without tilting.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
5167
The product you are viewing cross references to these numbers
Fits:
Porsche 911
Porsche 996
Porsche 924S
Porsche 944
Porsche 968
Description:
With this special tool, the filters of the injectors can be removed quickly, cleanly and effectively. In addition, the tool has a centering syringe on the head side, with which the new filter can be pressed straight into the injection nozzle without tilting.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
5167
5167
The product you are viewing cross references to these numbers
£20.00
Now £19.00
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Shift coupler clamp for Porsche 911
Code: SR151
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Shift coupler clamp for Porsche 911
CNC machined from aerospace alloy, our precision Shift Coupler Clamp ensures that your coupler stays where you set it. With extra clamping power ensured with our unique design, one-handed set-up, and anodized for great looks and protection, our Shift Coupler Clamp will provide that extra confidence you need.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR151
The product you are viewing cross references to these numbers
CNC machined from aerospace alloy, our precision Shift Coupler Clamp ensures that your coupler stays where you set it. With extra clamping power ensured with our unique design, one-handed set-up, and anodized for great looks and protection, our Shift Coupler Clamp will provide that extra confidence you need.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR151
91442421400
The product you are viewing cross references to these numbers
£47.12
Now £44.76
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Spark plug hole repair kit for Porsche 911
Code: SR130
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Spark plug hole repair kit for Porsche 911
Stripped spark plug threads in a 911 head usually means one of two things– a compromised repair or an engine drop to do it properly.
Until now.
STOMSKI RACING's new 911 Spark Plug Hole Repair Kit allows you to either accurately chase the threads of the damaged head, or if necessary, effectuate a complete fix by installing a Time-Sert (or Big-Sert). Our new digitally designed and CNC machined jig mounts over two of the valve cover studs, and when locked down with the included thumb screws, allows Time-Sert reamers, chasers, taps, and setters to be precisely aligned by way of the jig's guide tube and custom tap driver– all while the engine is still in the car.
Available in two different versions:
• SR130 for use with the standard M14x1.25 TimeSert Kit, and Inserts (TS4412E & TS44111) and;
• SR130BS for use with Big-Sert M14x1.25 oversized Insert Kit, and Inserts (TS5141E & TS51407).
We also have Time-Sert/Big-Sert 14x1.25 Kits and Inserts available for the complete package.
Stripped spark plug threads in a 911 head usually means one of two things– a compromised repair or an engine drop to do it properly.
Until now.
STOMSKI RACING's new 911 Spark Plug Hole Repair Kit allows you to either accurately chase the threads of the damaged head, or if necessary, effectuate a complete fix by installing a Time-Sert (or Big-Sert). Our new digitally designed and CNC machined jig mounts over two of the valve cover studs, and when locked down with the included thumb screws, allows Time-Sert reamers, chasers, taps, and setters to be precisely aligned by way of the jig's guide tube and custom tap driver– all while the engine is still in the car.
Available in two different versions:
• SR130 for use with the standard M14x1.25 TimeSert Kit, and Inserts (TS4412E & TS44111) and;
• SR130BS for use with Big-Sert M14x1.25 oversized Insert Kit, and Inserts (TS5141E & TS51407).
We also have Time-Sert/Big-Sert 14x1.25 Kits and Inserts available for the complete package.
Prices from: £254.14
Shop Securely
12 Month Warranty
Worldwide Delivery
Also found on these pages
You may also like
-
Intermediate shaft (IMS)
-
Oil System Parts
-
Fuel System Parts
-
Gaskets & Sets
-
Radial Seal / RMS / Camshaft / Balance shaft
-
Belts / Tensioners / Rollers
-
Chains & Tensioners
-
Timing covers and gaskets
-
Engine Bearings / Shells
-
Engine Valves / Guides / Springs
-
Rocker Arms & Tappets
-
Engine Bolts / Studs
-
Engine Mounts
-
Piston Rings
-
Engine Cylinders / Liners / Pistons
-
Connecting Rod
-
Cylinder Head / Camshaft Carrier
-
Camshaft covers / Gaskets
-
Camshaft gears / sprockets and fixings
-
Crankcase Parts
-
Crankshaft & Parts
-
Engine Tinware
-
Turbo Chargers / Intercoolers & Parts
-
Air Intake & Injection
-
Carburetors & Parts
-
PMO Carburetors
-
Cylinder Liner
-
Used Engines
Popular Models
