Air Induction Kits


- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 GT3 2007>>
High flow with excellent filtration.

This Product Fits:
Porsche 911 (996) 3.6 GT3 (360bhp) 03/99 - 03/03
Porsche 911 (996) 3.6 Turbo 03/00 -
Porsche 911 (997) 3.6 Carrera GT3 04/06 -
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3603001596
The product you are viewing cross references to these numbers





- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 GT3 2007>>
Fits:
Porsche 996 GT3 / GT3 RS
Porsche 997.1 GT3 / GT3 RS
GruppeM RAM AIR SYSTEMS epitomize the GruppeM philosophy of attention to detail. By replacing the factory air handling systems, increased airflow streams into the combustion chamber.
On the GruppeM intake the factory ductwork is replaced with heat-shielding carbon fiber with enhanced inlets to capture the maximum amount of air.
Lower intake air temperatures carry higher concentrations of oxygen, allowing for more energetic explosions and producing more horsepower and torque. Of course, reliability is never sacrificed -- high-efficiency, high-flow K&N air filter materials prevent contaminants from interfering with proper engine function.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FRI-0141
The product you are viewing cross references to these numbers





- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>

This Product Fits:
Porsche 996 GT2 / GT3 / TURBO
Panel Filter Size:
- width - 178mm
- height - 522mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FB195
The product you are viewing cross references to these numbers





- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04

SOUND. The factory airbox on the 996 GT3 is designed to muffle induction sound to keep it out of the cabin. This intake will let out the wonderful induction note of the GT3's flat six.
POWER With a much smoother intake path and colder intake temps this intake provides significant power gains for your GT3. On our dyno we saw gains of 12 whp and 10 ft/lbs of tq.
FEATURES:
• Fits all Porsche 996 GT3 vehicles (1999-2005)
• Improves horsepower and torque by 12 whp and 10ft-lbs
• Saves 3 lbs from the rear of the vehicle
• Includes dual dry-style air filters which do not require oiling; simply wash down with warm water and re-use
• Constructed from genuine carbon fiber
• Developed by Professional Race teams and Fabspeed Motorsport for IMSA Grand Am professional racing
• Simple DIY bolt-on installation, no cutting or welding required
All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
NOTE:
Compatible with IPD Plenum and 82mm GT3 Throttle Body but requires additional hose adjustment during installation
DISCLAIMER:This product removes the OEM intake filter system from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Air Filter solely intended for track and race cars as it is NOT California Air Resources Board Certified (CARB) and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR996GT3COMPAI
The product you are viewing cross references to these numbers





- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>

This Product Fits:
Porsche 911 (996) 3.6L GT2 2001-05
Porsche 911 (996) 3.6L GT3 1999-05
Porsche 911 (996) 3.6L Turbo 2000-05
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33-2189
The product you are viewing cross references to these numbers





- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
This is only the replacement filter for the induction kit.
Replacement filter for GruppeM RAM AIR SYSTEMS epitomize the GruppeM philosophy of attention to detail. By replacing the factory air handling systems, increased airflow streams into the combustion chamber.Shape type: Round taper (RT)
Flange inner diameter (F): 114mm
Filter Outer Diameter Base ( BO.D): 149mm
Filter Outer Diameter Top (TO.D): 114mm
Filter length (L): 114mm
Flange length (FL): 16mm
TOP: Taper Filter
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
GMR-0945
The product you are viewing cross references to these numbers






Can be adapted to various vehicles.
Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm


