do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Jaguar
The SmartTOP roof control unit allows you to open or close the convertible top while driving at slow speeds. It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.
Designed For:
Jaguar F-Type Convertible MY 2013+
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Invert switch logic
Direction of center console top switch can be changed is desired.
Windows close automatically
After closing the top, all windows roll up automatically.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Window positions programmable
Raise windows after opening top.
ECO Disable
Automatically disable ECO mode when starting the car.
Exhaust Flap/Valve Memory
Memorise last setting or always open exhaust flaps.
Individually programmable
Configure functions of the module to meet your personal preferences via our signature blinker setup menu.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Valet Mode
Lock the top in the closed position with a quick key sequence when needed.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using any Mac or PC.
Standby Power: <0.1MA
Dual Color LEDs: Yes
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
Advanced automotive diagnostic tool
● ULTRA SMART
● ULTRA HIGH PERFORMANCE
● ULTRA RIGHT FOR YOU
iCarsoft CR ULTRA is and advanced automotive diagnostic tool with 10inch touch screen tablet, Bluetooth and WI-FI. It enjoys more than 30 special service functions, supports ECU coding, programming, active test and more. With this all-in-one intelligent automotive scanner, you are able to diagnose, research, and manage any issues at fingertips with its smooth logical workflow, where fully optimizes easy-to-use software allows advanced OE-level diagnostics of online ECU coding, complete bi-directional functions, access to all vehicle modules, etc.
CR ULTRA GLOBAL VEHICLE COVERAGE
European:
For Abarth, For Alfa Romeo, For Audi, For Bentley, For Mercedes-Benz, For BMW, For Bugatti, For Citroen, For Dacia, For EU-Ford, For Ferrari, For Fiat, For Jaguar, For Lamborghini; For Lancia, For LandRover; For Maserati; For Maybach; For Mini; For Opel; For Peugeot; For Porsche; For Renault, For Rolls-Royce, For Rover, For Saab, For Seat, For Skoda, For Smart, For Sprinter, For Vauxhall, For Volvo, For VW, For (UKRAINE) ZAZ, For (RUSSIA) GAZ, For IZH, For PAZ, For SEAZ, For UAZ, For VAZ.
American:
For Buick; For Cadillac; For Chevrolet; For Chrysler; For Dodge; For Ford; For GM; For Hummer; For Jeep; For Lincoln; For (BRAZIL) BX-Fiat; For BX-GM.
Australian:
For Au-Ford; For Holden.
Asia:
For (Japan) Acura; For Daihatsu; For Honda; For Infiniti; For Isuzu; For (Japan) Isuzu; For Lexus; For Mazda; For Mitsubishi; For Nissan; For Nissan GTR; For Scion; For Subaru; For Suzuki; For (Thailand) Isuzu; For Toyota; For (Korea) Daewoo; For Hyundai; For KIA; For Samsung; For Ssangyong; For (China) Baic; For Beijing; For Changan;For Changan-Ford; For Changcheng; For Changhe; For (China) Suzuki; For (China) Peugeot; For (China) Honda; For (China) Nissan; For (China) XK; For Flyer, For BYD; For Fukang; For Futian, For Foton; For Geely; For Gonow; For GZ Honda; For Hafei; For Haoqing; For HC For BMW; For Hmada; For Huachen; For Isuzu,For JMC; For Jacty; For Jianghuai; For Jiao; For Jinlong; For Joylong; For Lifan; For Liuwel-TY; For Luxgen; NJ Fiat; For Qirul-TY, For Chery; For Qoros; For Saicmg; For Spark-TY; For (China) Toyota; For Trumpchi GAC; For Weili; For Xiaokang For Dongfeng; For Xili,For Faw For Tianjin; For Xinkai; For (China) Mazda; For Zhongshun; For Zhongtai,For Zotye; For Zhongxing; For (India) Mahindra; For Maruti; For Tata; For (Malaysia) Perodua; For Proton; For (Iran) MVM.
PRODUCT FEATURES
SUPPORTS MORE THAN 30 SERVICE FUNCTIONS.
1. Comprehensive OBD relearn coverage.
2. Onscreen relearn procedure.
3. Read &Clear codes for all available systems.
4. Display live data in text, graph & analog for easy data review.
5. Auto VIN technology can automatically identify model and year information in no time.
6. Actuation Test / Bi-directory Test is used to access vehicle-specific subsystem and component tests.
7. Steering Angle Sensor (SAS) calibration: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
8. Oil Light/Service Reset: Support service lamp reset, reset service mileage and service intervals.
9. Electronic Parking Brake (EPB): System maintenance deactivates and reactivates the EPB system for replacement and initialization.
10. Diesel Particulate Filter (DPF): Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Battery Management System (BMS): Registers new battery to the BMS while battery replacement.
12. Electronic Throttle Control system (ETC): Relearns the throttle valve control value while clear or replaces the throttle value.
13. ABS Bleeding: Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
14. Injector coding: Relearn the injector control parameter while the injector renewed or replaced.
15. Support TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
16. AFS Head Lamp reset means that the adaptive front lighting system can be rotated to either side, pressing the button means they
stay pointing straight forward, and don't turn anymore when turning the steering wheel.
17. Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
18. Gearbox Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
19. Air conditioning service: Calibration of air-conditioning related control units, such as additional calibration of air mass flow, etc.
20. Air Filter Self-learning process after replacing the air filter.
21. Fuel Pump activation function, activate it when replace a new one.
22. ODO Reset, this function allow you to revise the date of odometer and write the original date into new odometer.
23. Seat Match, this utility performs the re-initialization of the power seat adaptive memory.
24. Windows/Door/Roof, when replacing door glass and after battery replacement on certain year, make, model vehicles special steps need to be taken in order to properly replace and reprogram the vehicle so the electric windows work properly , the door window glass position can be learned by executing this routine, which enables pinch protection and one touch up function.
25. Supports ADblue Reset, Stop/Start Reset, Tyre Reset, Nox Sensor Reset, Gear Learning and more.
26. Automatic software upgrade.
27. Easy to feedback test questions online.
28. Provides convenient instruction with customer in interface.
29. Language Change, this routine is to change language displayed in the instrument display.
30. Multi-language: English, German, Dutch, Spanish, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Hungarian, Chinese. (More languages will be added in the future.)
Note!
*Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
*This scan tool covers 20 years models, so some functions may not be available on all years /models.
STRONG HARDWARE:
ANDROID: 10.0
RAM: 4GB
ROM: 64GB
BATTERY: 6000mAh/7.6V
SCREEN: 10 Inches
CAMERA: 8 million pixel rear
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
10 inch professional automotive scan tool with videoscope and TPMS programming function.
- Warranty, update and support
- One Year Warranty for Hardware (Except for human damage).
- Lifetime free software update.
- Lifetime technical support.
CR Eagle Wireless Bluetooth diagnostic tool for 58 Major Vehicle Makes
iCarsoft CR Eagle is a professional and powerful car diagnostic tool for multi-brand vehicles. It’s an OE-level full system diagnostic for workshop and car enthusiast.
General diagnostic functions as following:
- Touch Screen
- Wi-Fi Internet
- One-Key Upgrade
- One-Key Feedback
- Multilingual Interface and Instructions
- Full OBDII/EOBD Function
- Battery Voltage Test
- Read and Clear DTC
- Read Ecu Information
- Read Live Data
- ECU Models（OBDII-16 DLC ）
- Read and Clear Freeze Frame
- Auto VIN Identify
- Actuation/Bi-directional Test
- TPMS Sensors Programming
Strong Hardware and Software makes the CR Eagle easy and intuitive operation:
The CR Eagle comes with 10.1-inch LCD touchscreen and 4GB(RAM) + 128GB(ROM).
Built-in TPMS Programming module and equipped with 4pcs TPMS sensors.
Standard equipped with Videoscope.
Fast AutoVIN Identify: Automatically retrieves detailed vehicle information, eliminating manual entry and saving time. It improves accuracy, reduces human errors, and enhances user experience, making diagnostics faster and more reliable.
Compatible with CAN-FD protocol, enhancing the real-time performance of vehicle diagnosis.
Support V.A.G Guide Function.
Multi-language: English, Deutsch, French, Dutch, Spanish, Czech, Swedish, Russian, Hungarian, Norwegian, Portuguese, Italian, Polish, Danish and Finnish.
iCarsoft CR Eagle supports powerful Bi-directional control/Active Tests
Bi-directional control/ Active Test can be used to perform specific operations or to test different components and systems of a vehicle, help check or adjust vehicle functions, as well as troubleshoot and repair. Specifically, Bi-directional control/ Active Test can perform the following operations:
**The function is dependent on your car’s make, model and year. Contact us for more details if needed.
The iCarsoft CR Eagle scan tool support ECU Coding (Customize)
With ECU coding, the parameters and settings of the ECU can be modified to achieve some specific functions or to optimize vehicle performance. Specifically, ECU Coding can be used in the following aspects:
- Accessory Replacement: When replacing certain vehicle components, ECU Coding may be required to make them compatible with the vehicle system. Warm Tips: Before coding, please read and record the original module’s information.
CR Eagle supports TPMS Programming.
The iCarsoft CR Eagle TPMS Programming diagnostic tool comes with built-in TPMS programming module. It’s a perfect tire pressure diagnosis tool, which can realize Sensor Activation, Sensor Programming, Sensor Learning, Tire Pressure Fault Diagnosis.
Lifelong free online update
In contrast to other OBDII scanner on the market that demand users to pay for updates, our CR Eagle car scanner comes with 40+ reset functions with lifetime free updates. Increasingly sophisticated software for better compatibility. And the CR Eagle scan tool support Wi-fi and the users can update just with one click on the menu.
9 Hot Service Functions covering your daily maintenance needs.
- Oil Reset (For 57 vehicle makes): Allows you to perform reset for a new calculation of the engine oil life system once changed the oil, reset the service lamp, service mileage and service intervals.
- Electronic Throttle Control (For 56 vehicle makes): Relearns throttle valve control parameters after resetting or replacing the throttle body.
- EPB-Brake-Pad Reset (For 53 vehicle makes): Allows you to retract electric parking brake calipers and reset the brake pad after the replacement
- Steering Angle Reset (For 57 vehicle makes): Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
- DPF Regeneration (For 54 vehicle makes): Specially works for diesel particulate filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
- Injector Coding (For 54 vehicle makes): Relearn the injector control parameter while the injector renewed or replaced.
- ABS Bleeding (For 53 vehicle makes): Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
- TPMS Reset (For 56 vehicle makes): Allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
- Battery Management Service (For 48 vehicle makes): Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
Standard equipped with 4 commonly used OBDI adaptors - The CR Eagle supports part of the OBDI protocol vehicles. It comes with 4 most commonly used adaptors.
Benz38Pin multi-system adaptor
BMW20Pin adaptor
Standard equipped with Videoscope and 4pc TPMS Sensors - The CR Eagle auto diagnostic tool also with a nice Videoscope and 4pcs TPMS sensors. It’s an all-in-one tool for the workshop.
Product Specifications:
Operating System: Android 10.0
Processor: Quad Core 2.0 GHz
Memory: 128GB
Display: 10.1-inch LCD capacitive touchscreen with 1280x800 resolution
Connectivity:
USB Host
USB Type C
Wi-Fi (2.4/5 GHz)
Bluetooth
Audio Input/ Output：
Input: Microphone
Output: Speaker
Power and Battery：
3.8V/10000mAh lithium-polymer battery
Charges via 5V DC power supply
Tested Battery Life： Around 5 hours of continuous use
Battery Charging Input： 5V / 3A
Power Consumption： 800mA (LCD on with default brightness, Wi-Fi on) @3.8 V
Operating Temp. ：0 to 40°C (32 to 104°F)
Storage Temp. ：-20 to 70°C (-4 to 158°F)
Operating Humidity： 5% - 95% non-condensing
Dimensions (W x H x D)：
294mm X 206mm X 42.5mm
(11.57inch X 8.11inch X 1.67inch)
Net Weight :≈1500g (3.30lb)
Supported Automotive Protocols: ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda
Diag-H Protocol, TP2.0, TP1.6, DoIP, CAN FD, J2534.
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
iCarsoft CR MAX BT is a professional and powerful vehicle fault diagnosis tool for multi-brand vehicles (more than 40 vehicle makes) developed by iCarsoft technology inc.
With a 7.0" LCD capacitive touchscreen that displays at 1024x600 quality with the ability to quickly read and clear DTCS for all available modules for the majority of makes and models on the market, the CR MAX provides you with superior special functions.
It features full ECU diagnosis for most vehicle brands and test modes mainly includes: CANBUS, ISO9141, KWP2000, AND J1850 etc.
It enables technicians to accurately diagnose complex problems
Product Features
1. Comprehensive OBD relearn coverage.
2. Onscreen relearn procedure.
3. Read &Clear codes for all available systems.
4. Display live data in text, graph & analog for easy data review.
5. Auto VIN technology can automatically identify model and year information in no time.
6. Actuation Test / Bi-directory Test is used to access vehicle-specific subsystem and component tests.
7. Steering Angle Sensor (SAS) calibration: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
8. Oil Light/Service Reset: Support service lamp reset, reset service mileage and service intervals.
9. Electronic Parking Brake (EPB): System maintenance deactivates and reactivates the EPB system for replacement and initialization.
10. Diesel Particulate Filter (DPF): Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Battery Management System (BMS): Registers new battery to the BMS while battery replacement.
12. Electronic Throttle Control system (ETC): Relearns the throttle valve control value while clear or replaces the throttle value.
13. ABS Bleeding: Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
14. Injector coding: Relearn the injector control parameter while the injector renewed or replaced.
15. Support TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
16. AFS Head Lamp reset means that the adaptive front lighting system can be rotated to either side, pressing the button means they stay pointing straight forward, and don’t turn anymore when turning the steering wheel.
17. Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
18. Gearbox Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
19. Air conditioning service: Calibration of air-conditioning related control units, such as additional calibration of air mass flow, etc.
20. Air Filter Self-learning process after replacing the air filter.
21. Fuel Pump activation function, activate it when replace a new one.
22. DTC library to look up when user is operating this tool.
23. Support Freeze Frame of Fault Code functions.
24. Automatic software upgrade.
25. Easy to feedback test questions online.
26. Provides convenient instruction with customer in interface.
27. Multi-language: English, German, Dutch, Spanish, French. (More languages will be added in the future.) Note!
*Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
*This scan tool covers 20 years models, so some functions may not be available on all years /models.
*We reserve the rights to make any change to this description without notice.
Operating System: Android 8.1.0
Processor: Quad-core 1.3 GHZ
Memory：16GB
Display：7-inch LCD Capacitive touchscreen with 1024x600 resolution
Connectivity: Mini USB 2.0/ USB2.0/ Wi-Fi / Bluetooth/OBD II
Body Colour: Black
Audio Output: Buzzer and Speaker
Input: N/A
Power and Battery: 3.7 V/5000MAH Lithium-Polymer battery
Charges Via 5 VDC Power Supply: 0BD DLC Voltage Range:9-18V
Test battery life: Around 5 hours of continuous use
Battery Charger:5V/2A
Power Consumption:500MA (LCD on with default brightness, Wi-Fi on) @3.7 V
Operating Temp: 0 to 40° C (32 TO 104°F)
Storage Temp:-20 TO 70° C(-4 TO 158°F)
Operating Humidity: 5%-95% Non-condensing
Dimensions (W*H*D): 40.0MM*150.0MM*35.0MM
Net Weight:750G
Works on all cars upto 2017 with OBDII port.
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
ICARSOFT CR PRO SUPER ADVANTAGES:
• Diagnose Single Brand of most Models (OBDII-16DLC)
• Full System Diagnosis
• Read & Clear DTC
• Read Live Data
• Oil Service Reset
• Electronic Parking Brake (EPB) system maintenance
• Battery Management System (BMS)
• Diesel Particulate Filter (DPF) Regeneration Control System
• Electronic Throttle Control System (ETC)
• Steering Angle Sensor (SAS) Calibration
• Battery Test
• Data Review and Print
• Full Speed Upgrade via PC
• 4.0″ TFT LCD, 480*320 Pixels
• Multi-Language: English, German, Dutch, Spanish and French
ICARSOFT CR PRO OBDII FUNCTION FOR ALL CAR BRANDS
OBDII Function for all OBDII cars.
Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes.
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle.
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.
iCarsoft CR PRO OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft CR PRO OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.
ICARSOFT CR PRO FEATURES FOR GLOBAL CAR BRANDS
• iCarsoft CR PRO reads and clears trouble codes on most of the electronic systems such as engine, transmission, ABS, airbag etc.
• Support OBDII/EOBD (Ten Modes of Operation)
• Full ECU Diagnosis
• Oil Light/Service Reset
• Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization
• Battery Management System (BMS) registers new battery to the BMS while battery replacement
• Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator
• Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve
• Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement
• Applies to most models which equipped with OBDII-16 DLC
iCarsoft CR PRO vehicle coverage for global car brands:
Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo
ICARSOFT CR PRO CONTENTS
• iCarsoft CR PRO scantool
• TF card with diagnostic software
• OBDII cable
• Users Manual
• PC Connecting cable
• Nylon Carry Case
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)
Contents:
CR V2.0 (1+4) Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual
Product Features
1. iCarsoft CR V2.0(1+4) can do it all-reads and clears
trouble codes on most of the systems such as engine, transmission, ABS and
airbag etc.
2. Support OBDII/EOBD Ten Modes of Operation
3. Read Live Data
4. Full
ECU Diagnosis
5. Applies to the single Brand of most of the Models which equipped
with OBDII-16 DLC
6. Easy To Use With Silicone Keys
7. Oil Light/Service Reset:
Support service lamp reset.
8. Electronic Parking Brake (EPB) system maintenance
deactivates and reactivates the EPB system for
replacement and initialization.
9. Battery Management System (BMS), registers new
battery to the BMS while battery replacement.
10. Diesel Particulate Filter (DPF)
regeneration control system, requests the DPF regeneration process while DPF
blockage and turn off the DPF indicator.
11. Electronic Throttle Control system
(ETC) relearns the throttle va value while clear or replaces the throttle
valve.
12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering
wheel to straight ahead, or recalibrates SAS while steering part
replacement.
13. ABS Bleeding, release the air to restore ABS Brake sensitivity,
or relearn while ABS replaced.
14. Injector coding, relearn the injector control
parameter while the injector renewed or replaced
15. The Print Data function
allows you printing out diagnostic data recorded by the scan
16. Battery test
allows you getting the voltage of battery with OBD port by the scan tool when
the engine starts.
17. DTC Library to lookup when user is operating this
tool.
18. Upgrade Via PC
19. Multi-language: English, German, Dutch, Spanish,
French.
OBDII Function
- Read Codes
- Erase Codes
- I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
- Data stream.
- Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
- O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
- On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
- Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
- Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
- Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
- Turn off Check Engine Light (MIL), clear codes and reset monitors
- Read live PCM DataStream
- Support CAN (Controller Area Network) and all other
- Multilingual menu and DTC definitions- English, Spanish, and German etc.
- Read pending DTCs
- Read permanent DTCs
- DTCs search
- Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
- Works on most of 2001 and later OBDII compliant PETROL European vehicles
- Works on most of 2004 and later OBDII compliant DIESEL European vehicles
- Works on most of 1996 and later OBDII compliant US and Asian vehicles
- View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
- Comprehensive Help, Including OBD Parameter, Mode Explanations & More
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
iCarsoft LR V2.0 is a Professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc. With a 4.0" TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brands and test modes mainly include CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.
Kit:
V2.0 Main Unit
Main Cable
Data Cable
Nylon Suitcase
User Manual
Fifteen Advantages:
Diagnose Single Brand of most Models (OBDII-16DLC)
Full System Diagnosis
Support Oil Service Reset
Electronic Parking Brake (EPB) system maintenance
Battery Management System (BMS)
Diesel Particulate Filter (DPF) Regeneration Control System
Electronic Throttle Control System (ETC)
Steering Angle Sensor (SAS) Calibration
Read and Clear DTC
Read Live Date
Support Battery Test
Support Data Review and Print
Full Speed Upgrade Via PC
4.0″ TFT LCD, 480*320 Pixels
Supports multiple languages
Features
1. The V2.0 edition can do it all-reads and clears trouble codes on most of the systems such as the engine, transmission, ABS and airbag etc.
2. Support OBDII/EOBD Ten Modes of Operation
3. Read Live Data
4. Full ECU Diagnosis
5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6. Easy To Use With Silicone Keys
7. Oil Light/Service Reset: Support service lamp reset.
8. Electronic Parking Brake (EPB) system: maintenance deactivates and reactivates the EPB system for replacement and initialization.
9. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
10. Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replace the throttle valve.
11. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead or recalibrates SAS while steering part replacement.
12. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
13. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
14. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
15. DTC Library to lookup when the user is operating this tool.
16. Upgrade Via PC
17 Multi-language: English, German, Dutch, Spanish, French (more under development)
18 ABS Bleeding: release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
19 Injector Coding: relearn the injector control parameter while the injector renewed or replaced
OBDII
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the onboard computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's onboard computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11 Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More…..
Specs
Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V(Typical)
Power Consumption: 1.8W(Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
LRV1.0 is a professional vehicle fault diagnostic tool developed by iCarsoft Technology Inc.. Specially for full system of one vehicle brand. This product supplies TFT LCD screen and unique diagnostic software.
This Product will work on the following cars:
Freelander
Freelander 2
Defender
Discovery II
Discovery III
Discovery 4
Range Rover Sport
Range Rover
Range Rover Evoque
Eleven Super Advantages:
1 Diagnose Single Brand of all Models (OBDII-16DLC)
2. Full System Diagnosis
3. Support Oil Service Reset
4. Steering Angle Sensor (SAS) Calibration
5. Read & Clear DTC
6. Read Live Date
7. Support Battery Test
8. Support Data Review and Print
9. Full Speed Upgrade via Computer
10. Support Multi-Language
11. Available in Red, Black, Orange and Blue
To see detailed list of all functions please CLICK HERE
Features for Land Rover:
• iCarsoft LR V1.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
• Support OBDII/EOBD Ten Modes of Operation.
• Read Live Data.
• Full ECU Diagnosis.
• Easy To Use with Silicone Keys.
• Oil Light/Service Reset: Support service lamp reset
• SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
• The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports
• Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
• DTC Library to lookup when user is operating this tool.
• Upgrade Via Computer.
• Multi-language: English, German, Dutch, Spanish, French.
Specifications:
• Display: 2.8" TFT LCD screen, 320 x 240 pixels display
• Operation Temperature: 0 ℃ -- 50 ℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating Current: 150mA@12V (Typical)
• Power Consumption: 1.8W(Typical)
• Dimension: 187.5 x 101 x 32 mm (L x W x H)
Contents:
• TF Card
• Hardcopy User's Manual
• OBD II cable
• USB PC Connecting Cable
• Nylon carry case
Support Multi-Language:
Multilingual menu and DTC definitions- English, Spanish, and German, etc
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
iCarsoft CR Plus is a well built comprehensive diagnosis instrument by iCarsoft.It's not only including full function of OBDII/EOBD,but also support more function of Four system( Engine, automatic transmission, anti-lock braking system and airbag ) of certain models of car, such as read and clear code, multi languages, data flow picture display, graph. It also includes Electronic Parking Brake (EPB) release, Steering Angle Sensor (SAS) and Oil Service Light resets. View Engine, ABS, SRS along with A/T enhanced data
Features & Benefits:
• OBDII diagnostic full function
• Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
• Support 4 Systems: Engine, Transmission, ABS, and Airbag.
• Basic diagnostic functions: read DTCs, clear DTCs, and read data stream
• Support DTCs help, data stream wave display, history data record and replay
• Online upgrade, you can download the latest version anytime anywhere.
• Auto module search
• Enhanced OBDII Mode 6
• Supports vehicles 1996 & newer ( OBDII & CAN )
• Retrieves generic P0, P2, P3 & U0 codes,
along with manufacturer specific P1, P3 & U1 codes – both permanent & pending
• Read & Clear Check Engine Lights
• Turn off MIL & reset monitors
• Displays DTC definitions right on the screen
• View freeze frame data & I/M Readiness monitor status
• Display live PCM data stream & O2 Sensor test data
• Graph, record & replay data in full color
• Resets Oil Service Light
• Brake Pads Reset
• Steering Angle Sensor Calibration
• Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time
• Retrieves vehicle information ( VIN, CIN and CVN )
Twelve Super Advantages:
1. Read & Clear DTCs
2. Read Data Stream
3. Full ECU Diagnosis
4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC
5. Easy To Use With Metal Dome Keys
6. Oil Light/Service Reset
7.Brake Pads Reset
8.Steering Angle Sensor Calibration
9. 4.0" TFT LCD With 480 * 320 Pixels
10. USB 2.0 High Speed Upgrade
11. Upgrade Via TF Card
12. Multi-language: English, French, Spanish, German, Italian, Russian and Dutch.
And for more, refer to User's Manual.
Specifications:
• Display: 4.0" TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0℃ -- 50℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current: 150mA@12V(Typical)
• Power consumption: 1.8W(Typical)
• Dimension: 205mm*110mm*31mm(LxWxH)
• Weight: 350g
OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by
the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of
the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the vehicle's service repair manual to determine the procedures
necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.
Contents:
● Main Unit
● Hardcopy User's Manual
● Main cable
● USB cable
● TF Card
● Nylon carry case
● TF Card reader
Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.
Only to be used with CR MAX BT diagnostic tool
The iCarsoft USB Inspection Camera VDSP2000 Videoscope is a perfect tool for viewing and capturing video and still images of hard-to-reach areas.
It’s a perfect partner for iCarsoft tablet diagnostic tool CR MAX BT.
With its fluid resistant 5.5mm head and LED illumination, dark and fluid soaked areas are no longer a problem.
Features and Advantages
- View and record images and videos.
- Take images easily with one-click snap shot button.
- Easy to adjust the strength of light (6 levels).
- Extremely small 5.5mm camera-IP67 certified for immersion, allows for use in wet, fluid soaked spaces.
- 5.5mm camera head easily fits into most spark plug holes for inspection.
Specifications
Len O.D. (mm) : 5.5mm
Tube O.D. (mm) : 4.8mm
Tube Length: 1000mm
USB Cable Length: 1500mm
Resolution: 1280x720
Operating Temperature: 0℃~65℃
Power Supply: USB 5V
USB Port: USB2.0/Type C/Micro USB
Mobil Super™ 3000 x1 Formula FE 5W-30 provides long engine life with enhanced protection over a wide temperature range for many types and ages of vehicles including passenger cars, light commercial vehicles and vans.
Mobil Super 3000 x1 Formula FE 5W-30 Provides...
- Enhanced high temperature protection
- Enhanced cold start-up performance
- Enhanced engine cleanliness and sludge prevention
- Enhanced wear protection
- Helps fuel economy (as per ACEA A5/B5)
- Suitable for use in both gasoline and diesel engine passenger cars, light commercial vehicles and vans.
Applications
Mobil Super 3000 x1 Formula FE 5W-30 is recommended if you regularly experience demanding conditions where it can help combat the damage caused by frequent high engine stress.
- Mobil Super 3000 x1 Formula FE 5W-30 can be used in a variety of gasoline and diesel automobiles, light trucks and vans designed for use of a low viscosity (HTHS) motor oil.
- Mobil Super 3000 x1 Formula FE 5W-30 is intended primarily to meet the requirements of Ford in all engines requiring WSS-M2C913-D / C and is also suitable for use in Jaguar and Land Rover vehicles where the viscosity and quality claims are appropriate.
Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.
Specifications & Approvals
This product has the following approvals: STJLR.03.5003 & VW VWC 53036
This product is recommended for use in applications requiring: API CF
This product meets or exceeds the requirements of: API SL, API SP, ACEA A5/B5, FORD WSS-M2C913-D
--Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle--
Properties & Specifications
Grade: SAE 5W-30
Density @ 15.6°C (ASTM D4052): 0.849 g/ml
Flash Point (Cleveland Open Cup, ASTM D92): 229°C
Kinematic Viscosity @ 100°C (ASTM D445): 9.7 mm²/s
Kinematic Viscosity @ 40°C (ASTM D445): 52.9 mm²/s
Viscosity Index (ASTM D2270): 170
Pour Point (ASTM D97): -36°C
Need more info? Check out Porsche Oils Overview our for everything you need to know about choosing the right oil.
Can be adapted to various vehicles.
Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm
Jaguar Parts – Genuine and Performance Components for British Luxury and Performance
Jaguar Parts at Design911 provide genuine, OEM-quality and performance replacement components engineered to maintain the refinement, power and driving dynamics Jaguar vehicles are known for. From classic grand tourers to modern performance models, Jaguar vehicles require correctly specified parts to preserve reliability, comfort and handling precision.
At Design911, we supply carefully sourced Jaguar parts including engine service components, brake systems, suspension parts, cooling components, drivetrain parts and interior and exterior trim — all selected for accurate fitment and long-term durability.
What Are Jaguar Parts?
Jaguar parts are manufacturer-correct replacement and upgrade components designed to maintain performance, safety and refinement across the Jaguar model range. These parts may include:
• Engine maintenance and service components
• Brake discs, pads and performance braking upgrades
• Suspension and steering system parts
• Cooling and electrical components
• Interior trim and exterior body panels
Using OEM-quality Jaguar parts ensures correct compatibility, factory specifications and preservation of the vehicle’s driving character.
Why Choose Design911 for Jaguar Parts?
Jaguar parts at Design911 offer:
• Genuine and OEM-quality replacement components
• Performance upgrade options for sport and performance models
• Manufacturer-correct specifications and precise fitment
• Access to trusted European automotive suppliers
• Reliable UK-based sourcing and specialist support
We apply the same quality standards across our Jaguar range to ensure durability, safety and dependable long-term performance.
When Should You Replace or Upgrade Jaguar Parts?
This category is ideal when:
• Carrying out routine servicing or preventative maintenance
• Replacing worn braking, suspension or engine components
• Upgrading performance systems on sport-focused models
• Restoring classic Jaguar vehicles
• Seeking trusted OEM-quality alternatives
Correctly specified Jaguar parts help maintain ride comfort, braking precision, engine efficiency and long-term reliability.
