IMS Bearings
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
This bearing is 62mm outer diameter and 17mm wide. It is not extractable externally and engine needs to be stripped down in order to change it.
M97 Larger Bearing IMS Direct Oil Feed (DOF) Kit
Fits:
Porsche Boxster 987 2.7L 2005 -08/08
Porsche Boxster 987 3.2/3.4L 2005-08/08
Porsche Cayman 2.7L 987C 2006>>
Porsche Cayman S 3.4L 987C 2005>>
Kit Includes:
Patented DOF Flange with anti-rust zinc plating
3 micro-encapsulated Porsche bolts
Spacer for double-row bearing
Engine oil port adapter with crush ring
Cam Plug
3,000psi hydraulic hose
Fitting for hose
Thread locker
Installation instructions
The direct oil feed (DOF) solution uses a patent pending custom made Intermediate Shaft Flange that utilizes a direct oil feed to the original Intermediate Shaft Bearing. It uses an adapted pressure fed oil line from a positive oil pressure feed on the cylinder head directly to an opening in the custom Intermediate Shaft Flange. This feeds fresh oil directly to the open end of the IMS bearing (after removing the seal to expose the ball bearings on the IMS bearing). By using a positive oil feed from the engine's cylinder head valve cover, there will always be a consistent flow of oil directed to the open end of the intermediate shaft bearing.
This is a cost effective way to help protect against a possible IMS bearing failure, using the original bearing. The system, however can also be used when replacing the bearing with a new SKF steel ball bearing for added insurance with a new, zero mile bearing.
This kit is comprised of the following items:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
IMS Bearing Upgrade Kit with 58mm Flange for “Open” Engines (doing an engine rebuild) with Complete Ancillaries – Essential Reliability Upgrade for Porsche 987.1 Boxster / Cayman Manual Models
This 58mm flange IMS bearing upgrade kit is specifically engineered for Porsche 987.1Boxster / Cayman, manual cars fitted with M97 intermediate shaft bearings. Supplied as a complete installation package, the kit includes a strengthened bearing assembly, fresh mounting hardware, seals, exhaust clamps, sleeves and all additional ancillaries needed to complete the upgrade in one comprehensive service.
Fits:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
The IMS (Intermediate Shaft) bearing supports the intermediate shaft that drives the camshafts. When the original bearing design deteriorates, it can fail without warning—leading to catastrophic engine damage. Upgrading to a modern, precision-engineered bearing significantly improves durability and long-term reliability, making this kit one of the most important preventative maintenance investments for these Porsche models.
What the IMS Bearing Upgrade Kit Does
This complete kit:
- Replaces the vulnerable original IMS bearing with a fortified, precision-engineered alternative
- Reduces friction and improves lubrication stability
- Protects the intermediate shaft from premature wear
- Prevents metal debris contamination inside the engine
- Restores confidence in long-term engine reliability
- Includes all necessary hardware, clamps, sleeves and seals for a seamless installation
Designed to meet the demands of both road use and high-performance driving.
Why IMS Bearings Fail in Porsche M97 Engines
Common causes include:
- Lubrication starvation, leading to ball bearing scoring
- Seal degradation, causing grease loss and overheating
- Contaminants entering the bearing assembly
- High engine speeds, accelerating wear
- Age-related material fatigue
- Inadequate internal lubrication flow in the early intermediate shaft design
Symptoms are often subtle—or non-existent—until severe engine damage has occurred.
Why the IMS Bearing Should Be Upgraded
Upgrading the IMS bearing provides:
- Prevention of catastrophic bearing failure
- Significant extension of engine lifespan
- Peace of mind for owners of 996/997/986/987 models
- A stronger, more stable bearing with improved lubrication path
- Reduction in maintenance costs over time
- A complete installation solution thanks to included ancillaries
This kit is essential for any Porsche owner planning long-term stewardship, spirited driving, or engine rebuild work.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSKIT987MAN.2
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
IMS Bearing Upgrade Kit with 58mm Flange for “Open” Engines (doing an engine rebuild) with Complete Ancillaries – Essential Reliability Upgrade for Porsche 987.1 Boxster / Cayman Tiptronic Models
This 58mm flange IMS bearing upgrade kit is specifically engineered for Porsche 987.1 Boxster / Cayman, Tiptronic cars fitted with M97 intermediate shaft bearings. Supplied as a complete installation package, the kit includes a strengthened bearing assembly, fresh mounting hardware, seals, exhaust clamps, sleeves and all additional ancillaries needed to complete the upgrade in one comprehensive service.
Fits:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
The IMS (Intermediate Shaft) bearing supports the intermediate shaft that drives the camshafts. When the original bearing design deteriorates, it can fail without warning—leading to catastrophic engine damage. Upgrading to a modern, precision-engineered bearing significantly improves durability and long-term reliability, making this kit one of the most important preventative maintenance investments for these Porsche models.
What the IMS Bearing Upgrade Kit Does
This complete kit:
- Replaces the vulnerable original IMS bearing with a fortified, precision-engineered alternative
- Reduces friction and improves lubrication stability
- Protects the intermediate shaft from premature wear
- Prevents metal debris contamination inside the engine
- Restores confidence in long-term engine reliability
- Includes all necessary hardware, clamps, sleeves and seals for a seamless installation
Designed to meet the demands of both road use and high-performance driving.
Why IMS Bearings Fail in Porsche M97 Engines
Common causes include:
- Lubrication starvation, leading to ball bearing scoring
- Seal degradation, causing grease loss and overheating
- Contaminants entering the bearing assembly
- High engine speeds, accelerating wear
- Age-related material fatigue
- Inadequate internal lubrication flow in the early intermediate shaft design
Symptoms are often subtle—or non-existent—until severe engine damage has occurred.
Why the IMS Bearing Should Be Upgraded
Upgrading the IMS bearing provides:
- Prevention of catastrophic bearing failure
- Significant extension of engine lifespan
- Peace of mind for owners of 996/997/986/987 models
- A stronger, more stable bearing with improved lubrication path
- Reduction in maintenance costs over time
- A complete installation solution thanks to included ancillaries
This kit is essential for any Porsche owner planning long-term stewardship, spirited driving, or engine rebuild work.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSKIT987TIP.2
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
62mm Flange IMS Bearing Upgrade Kit for “Closed” Engines with Full Ancillaries – The Ultimate Eternal Fix for Porsche 987.1 Boxster / Cayman Manual Models
MUST USE OUR BORING TOOL IN ORDER TO INSTALL - the boring tool can be purchased or rented from us
This IMS bearing upgrade kit is engineered specifically for Porsche 987.1 Boxster / Cayman manual cars with M97 intermediate shaft housings. This version is the Eternal Fix, a patented and significantly stronger alternative to ball-bearing-based designs. The kit includes a 62mm cylindrical IMS bearing with thrust control, plus all required ancillaries—hardware, exhaust clamps, sleeves, seals and fittings—ensuring a complete and professional installation.
Fits:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Designed for “closed” engines, this IMS solution must be installed using a dedicated boring tool, allowing the bearing assembly to be pressed directly into the back of the engine without full teardown.
The Early 987.1 engines using the 62mm closed bearing are particularly vulnerable to IMS wear, lubrication issues and axial loading. The EPS cylindrical bearing design eliminates these weaknesses by separating axial load from radial load, making this the only true long-term IMS cure rather than a temporary replacement.
What This IMS Upgrade Kit Does
This advanced IMS upgrade:
- Permanently eliminates the weak factory-style ball bearing
- Uses a patented cylindrical roller bearing with dramatically higher load capacity
- Separates axial and radial loads to prevent premature bearing overload
- Improves lubrication via a dedicated oil-pressure feed kit
- Protects the intermediate shaft and cam drive system
- Allows installation without full engine disassembly (when used with the correct boring tool)
Includes hardware, sleeves, exhaust clamps and seals for a complete upgrade
Designed for long-term reliability and motorsport-level durability.
Why the Original IMS Bearings Fail (Especially on 62mm Closed Engines)
Typical causes include:
- Ball bearing fatigue, leading to sudden collapse
- Axial load overload, which ball bearings cannot handle
- Oil contamination or lack of sufficient lubrication
- Heat cycling and material fatigue
- Seal degradation, allowing lubrication to escape
Design limitations of the early intermediate shaft system
Closed-style engines are especially susceptible because the bearing is not easily inspectable and operates under higher load.
Why the Eternal Fix IMS Upgrade Is the Best Solution
This patented system offers:
It is engineered to outlast the engine itself, making it the ultimate preventative upgrade for Porsche 987.1 Boxster / Cayman, manual cars.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSKIT987MAN.3
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
62mm Flange IMS Bearing Upgrade Kit for “Closed” Engines with Full Ancillaries – The Ultimate Eternal Fix for Porsche 987.1 Boxster / Cayman Tiptronic Models
MUST USE OUR BORING TOOL IN ORDER TO INSTALL - the boring tool can be purchased or rented from us
This IMS bearing upgrade kit is engineered specifically for Porsche 987.1 Boxster / Cayman Tiptronic cars with M97 intermediate shaft housings. This version is the Eternal Fix, a patented and significantly stronger alternative to ball-bearing-based designs. The kit includes a 62mm cylindrical IMS bearing with thrust control, plus all required ancillaries—hardware, exhaust clamps, sleeves, seals and fittings—ensuring a complete and professional installation.
Fits:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Designed for “closed” engines, this IMS solution must be installed using a dedicated boring tool, allowing the bearing assembly to be pressed directly into the back of the engine without full teardown.
The Early 987.1 engines using the 62mm closed bearing are particularly vulnerable to IMS wear, lubrication issues and axial loading. The EPS cylindrical bearing design eliminates these weaknesses by separating axial load from radial load, making this the only true long-term IMS cure rather than a temporary replacement.
What This IMS Upgrade Kit Does
This advanced IMS upgrade:
- Permanently eliminates the weak factory-style ball bearing
- Uses a patented cylindrical roller bearing with dramatically higher load capacity
- Separates axial and radial loads to prevent premature bearing overload
- Improves lubrication via a dedicated oil-pressure feed kit
- Protects the intermediate shaft and cam drive system
- Allows installation without full engine disassembly (when used with the correct boring tool)
Includes hardware, sleeves, exhaust clamps and seals for a complete upgrade
Designed for long-term reliability and motorsport-level durability.
Why the Original IMS Bearings Fail (Especially on 62mm Closed Engines)
Typical causes include:
- Ball bearing fatigue, leading to sudden collapse
- Axial load overload, which ball bearings cannot handle
- Oil contamination or lack of sufficient lubrication
- Heat cycling and material fatigue
- Seal degradation, allowing lubrication to escape
Design limitations of the early intermediate shaft system
Closed-style engines are especially susceptible because the bearing is not easily inspectable and operates under higher load.
Why the Eternal Fix IMS Upgrade Is the Best Solution
This patented system offers:
- Over 12× the load capacity of traditional ball-bearing IMS solutions
- True separation of radial and axial loads, preventing roller overload
- A bearing that does not rely on side-loading, unlike conventional cylindrical or ball bearings
- An oil-fed outer race, ensuring stable lubrication
- A lifetime-capable design, not a service interval part
- A 5-year warranty for confidence and peace of mind
- Compatibility with closed engines using a precise boring tool
It is engineered to outlast the engine itself, making it the ultimate preventative upgrade for Porsche 987.1 Boxster / Cayman, manual cars.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IMSKIT987TIP.3
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)
Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 58 MM - Open Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!
WHAT MAKES OUR SOLUTION DIFFERENT?
Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.
In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.
EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
the boring tool can be purchased or rented from us
Code: 987997IMSTOOL
Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)
Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 62 MM - Closed Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!
WHAT MAKES OUR SOLUTION DIFFERENT?
Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.
In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.
EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
987997IMS62MM
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
The 8102 has been developed specifically for the quick and safe removal and replacement of the Porsche IMS (Intermediate Shaft) bearing on the M96 and M97 engines fitted to all water cooled 911, Boxster and Cayman models from 1999 through to 2008. Complete with the camshaft and crankshaft timing tools.
Porsche Applications: 911, Boxster, Cayman (1999 - 2008).
Engine code applications include: M96, M97.
Kit includes camshaft and crankshaft locking tools for both early and late engines.
2 methods for removal of the bearing are provided. Bearing installation as per OEM instruction.
Made in Sheffield. IMPORTANT: ensure the force screw is well lubricated with molybdenum disulphide grease before use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8102
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610590102TOOL
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
This boring tool can be also be rented from us
for installing our 62mm IMS kit Code: 987997IMS62MM. For rental please see other listings.
When you purchase this product you will be supplied with brand new set of tools that haven't been used on any jobs.
We will not accept a return of this part if we find out that it is in used condition.
For IMS Boring Tool instructions please CLICK HERE
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
This boring tool can be purchased or rented from us
for installing our 62mm IMS kit Code: 987997IMS62MM
Costs
The boring tool cost will be refunded once the tool is returned to us and checked. The boring tool can also be purchased outright for £1895.00
For IMS Boring Tool instructions please CLICK HERE
-
Crankcase housing / Individual parts - 9720, 9721, 9722 - 987C.1 Cayman 2.7L / 3.4L 2006-08 101-005
-
Crankshaft - 9720, 9721, 9722 - 987C.1 Cayman 2.7L / 3.4L 2006-08 102-000
-
Camshaft / Driving mechanism - 9721, 9720, 9722 - 987C.1 Cayman 2.7L / 3.4L 2006-08 103-010
-
Exhaust system - 9721, 9720 - 987C.1 Cayman 2.7L / 3.4L 2006-08 202-000
-
Coupling - 9720,9721, 9722+, PR:480, 6-speed manual - 987C.1 Cayman 2.7L / 3.4L 2006-08 301-001
-
Tiptronic / Torque converter - PR:249 - 987C.1 Cayman 2006-08 330-000
-
Rear axle / Side part / Carrier 987C.1 Cayman 2006-08 501-001
-
Brake master cylinder / Brake servo 987C.1 Cayman 2006-08 604-000
-
Pedals 987C.1 Cayman 2006-08 702-000
-
Battery / Power distributor / Starter / Alternator 987C.1 Cayman 2006-08 902-005
-
Pulleys
-
Engine / Gearbox Mounts
-
Oil Flow / Sump
-
Engine Rods and Bolts
-
Thermostats
-
Radiators
-
Air Filters
-
Air Induction Kits
-
Performance Plenum
-
ECU Re-Mapping DIY
-
Electronic Throttle Booster
-
IRIDIUM POWER Spark Plugs
-
IRIDIUM RACING Spark Plugs
-
Plasma Direct Coils
-
Clutches / Flywheels
-
ECU Reader / Fault Finder
-
Exhaust Packages
-
Fuel Additives
-
Wössner Forged Piston Kit
-
CP Carrillo Connecting Rods
