请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Category Filter
适用于保时捷 986 / 996 / 997 的可调节下控制臂套件 - CONTROLARM06
CONTROLARM06
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Information
带有可调叉臂的外倾角可调轨道控制臂。
具有模拟（这里不使用复杂的垫片）范围的额外外倾角调节 ±2°。只需将臂预装到车辆上并进行调节即可轻松实现外倾角设置，无需任何特殊工具。
此价格为一套 4 个臂的价格。
目前这些武器适用于以下型号
• 996 前部或后部（包括 GT3）
• 986 正面
• 997 前部或后部
• 由锻造的 6061-T6 铝制成，具有最大的强度和最小的重量。
• 配有可完全重建的球形接头，也可润滑。它还可以在球形接头处预加载到您想要的扭矩量。
• 该臂还具有在配备 Litronic 的汽车上内置的行驶高度传感器的功能。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
CONTROLARM06
您正在查看的产品与这些编号存在交叉引用关系
具有模拟（这里不使用复杂的垫片）范围的额外外倾角调节 ±2°。只需将臂预装到车辆上并进行调节即可轻松实现外倾角设置，无需任何特殊工具。
此价格为一套 4 个臂的价格。
目前这些武器适用于以下型号
• 996 前部或后部（包括 GT3）
• 986 正面
• 997 前部或后部
• 由锻造的 6061-T6 铝制成，具有最大的强度和最小的重量。
• 配有可完全重建的球形接头，也可润滑。它还可以在球形接头处预加载到您想要的扭矩量。
• 该臂还具有在配备 Litronic 的汽车上内置的行驶高度传感器的功能。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
CONTROLARM06
572610K
5.72610K
99634105307
99634105308
99634105309
99634105310
99634105311
99634105312
99634105313
99634105314
99634105315
99634105316
99634105317
99634112290
99634144190
3602400996
572630K
99634112190
99634105319
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
1 x 保时捷可调下控制臂套件 (572610K
1 x 适用于保时捷的可调下拖曳臂套件 (572630K
€1,454.65
当前 €1,309.19
库存
相关产品
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Information
GT3 Front Suspension System. The Ultimate Front Suspension System
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
You can buy spare control arms if they need replacing. Part number 2180016-SA
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2180010
您正在查看的产品与这些编号存在交叉引用关系
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
You can buy spare control arms if they need replacing. Part number 2180016-SA
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2180010
2180010
您正在查看的产品与这些编号存在交叉引用关系
€4,504.50
当前 €4,054.05
库存
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Split bushing removal tool. 1 req'd per lifetime.
Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms
Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)
It used to be a difficult task
This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.
Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.
Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.
Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.
Combine with bushing installation tools part #2020904 to complete the job.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2020903
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms
Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)
It used to be a difficult task
This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.
Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.
Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.
Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.
Combine with bushing installation tools part #2020904 to complete the job.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2020903
2020903
您正在查看的产品与这些编号存在交叉引用关系
€175.50
当前 €157.95
库存
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Adjustable lower control arms (lower wishbone)
This is the replacement Control arms for the 2180010 kit.
GT3 Front Suspension System. The Ultimate Front Suspension System
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2180016-SA
您正在查看的产品与这些编号存在交叉引用关系
This is the replacement Control arms for the 2180010 kit.
GT3 Front Suspension System. The Ultimate Front Suspension System
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2180016-SA
2180016-SA
2180010
您正在查看的产品与这些编号存在交叉引用关系
价格: €1,462.50
由供应商供货