后下拉连杆。保时捷 9YA 卡宴 - 958505465D
958505465D
产品车辆组
- Porsche 9YA Cayenne V6 3.0L Petrol 340Hp 2018-23
- Porsche 9YA Cayenne Coupe V6 3.0L Petrol 340Hp 2019-23
- Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 340Hp 2018-23
- Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L 340Hp 2020-23
- Porsche 9YA Cayenne S V6 2.9L Petrol 440Hp 2018-23
- Porsche 9YA Cayenne Coupe S V6 2.9L Petrol 440Hp 2019-23
- Porsche 9YA Cayenne GTS V8 4.0L Petrol 460Hp 2020-23
- Porsche 9YA Cayenne Coupe GTS V8 4.0L Petrol 460Hp 2021-23
- Porsche 9YA Cayenne Turbo V8 4.0L Petrol 550Hp 2020-23
- Porsche 9YA Cayenne Coupe Turbo V8 4.0L Petrol 550Hp 2019-23
- Porsche 9YA Cayenne Turbo S E-Hybrid V8 4.0L 550Hp 2019-23
- Porsche 9YA Cayenne Coupe Turbo S E-Hybrid V8 4.0L 550Hp 2020-23
- Porsche 9YA Cayenne Coupe Turbo GT V8 4.0L 640Hp 2021-23
Information
后下拉连杆。保时捷 958 卡宴
单独出售 - 适合左右
適用於:
保时捷 9YA 卡宴 - 2018 年至 2023 年
对于配备
1P0——标准悬挂
1P7——PDCC/eAWS
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
958505465D
您正在查看的产品与这些编号存在交叉引用关系
单独出售 - 适合左右
適用於:
保时捷 9YA 卡宴 - 2018 年至 2023 年
对于配备
1P0——标准悬挂
1P7——PDCC/eAWS
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
958505465D
958505465D
您正在查看的产品与这些编号存在交叉引用关系
价格: €121.88
库存
安全购物
12 个月保修
全球交付
相关产品
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
后部复古 RSR 可调防倾杆。
适合
保时捷 911 - 1965 年至 1989 年
保时捷 911 Turbo - 1977 年至 1989 年
保时捷 912 - 1966 年至 1976 年
保时捷 914 - 1970 年至 1976 年
Retro RSR 可调式稳定杆系统
复古的外观与现代的性能和功能相结合，使这些可调节的防倾杆（防倾杆）成为符合时代特征的绝佳选择。
删除链接
外观与 RSR 原版相似，采用灰色调，低调复古。左右螺纹精密杆端可轻松调节前下拉杆长度。长度可调，轻松消除杆上的预紧力。杆端采用特氟龙内衬，无需润滑。
轻的
空心棒的重量是相同刚度的类似实心棒的一半。
衬套
特氟龙浸渍衬套无需油脂和维护，可实现平稳运行和长使用寿命。
贯穿车身式前杠
与1974年以前的车型和早期涡轮增压车型一样，通过车身安装。原厂未配备贯穿式稳定杆的车辆，应购买选配的支撑板套件。
复古风格的武器
钢臂与原始 RSR 类型相似，并具有钻孔调节位置。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1-RSRRSBA
您正在查看的产品与这些编号存在交叉引用关系
适合
保时捷 911 - 1965 年至 1989 年
保时捷 911 Turbo - 1977 年至 1989 年
保时捷 912 - 1966 年至 1976 年
保时捷 914 - 1970 年至 1976 年
Retro RSR 可调式稳定杆系统
复古的外观与现代的性能和功能相结合，使这些可调节的防倾杆（防倾杆）成为符合时代特征的绝佳选择。
删除链接
外观与 RSR 原版相似，采用灰色调，低调复古。左右螺纹精密杆端可轻松调节前下拉杆长度。长度可调，轻松消除杆上的预紧力。杆端采用特氟龙内衬，无需润滑。
轻的
空心棒的重量是相同刚度的类似实心棒的一半。
衬套
特氟龙浸渍衬套无需油脂和维护，可实现平稳运行和长使用寿命。
贯穿车身式前杠
与1974年以前的车型和早期涡轮增压车型一样，通过车身安装。原厂未配备贯穿式稳定杆的车辆，应购买选配的支撑板套件。
复古风格的武器
钢臂与原始 RSR 类型相似，并具有钻孔调节位置。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1-RSRRSBA
91133370111
477411313M
93033370125
93033370129
93033370128
91133370107
477411313N
93033370123
91133370101
91133370104
90133370103
90133370104
93033370100
您正在查看的产品与这些编号存在交叉引用关系
价格低至: €864.20
安全购物
12 个月保修
全球交付
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
Front QuickChange™ Blade Style Sway bar
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
227002
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
227002
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
2270020
2270022
您正在查看的产品与这些编号存在交叉引用关系
价格低至: €1,624.00
安全购物
12 个月保修
全球交付