请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Category Filter
Engine mounts, SET OF 2. Porsche 997.2 COUPE - 99737504908
99737504908/1KIT.2
产品车辆组
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII Turbo 2010-13
Information
Engine mount set
This OE Match engine mount set is designed for Porsche 911 (997.2) Carrera and 997.2 Turbo models without PADM. The kit includes two OE Match engine mounts along with the correct genuine Porsche hexagon bolts and nuts required for a secure, factory-spec installation. Replacing both mounts at the same time restores proper engine support and ensures balanced vibration damping across the drivetrain.
SET OF 2, with bolt and nuts
Fits:
Porsche 997.2 Carrera 2009 - 2012 COUPE
Porsche 997.2 Turbo 2010 - 2013 COUPE without PADM (dynamic engine mounts)
Diagram Ref No 2, 3 and 5
Engine mounts are essential for supporting the engine while isolating vibration and maintaining proper drivetrain alignment.
Kit Includes
2 × OE Match Engine Mount – 99737504908
4 × Genuine Porsche Hexagon Bolt – 90037815901
2 × Genuine Porsche Sleeve / Nut – 9A137542501
This kit contains everything needed to replace both engine mounts during servicing or drivetrain maintenance.
Engine mounts are structural components that connect the engine assembly to the vehicle chassis and rear subframe. The OE Match mount replicates the original Porsche hydraulic mount used in the 997 platform, providing the correct fit, durability and vibration-damping characteristics.
The mounts help stabilise the engine while absorbing drivetrain vibrations generated during acceleration, braking and gear changes. Supplied with genuine Porsche bolts and nuts, this kit ensures proper torque specification and reliable installation.
Function
• Engine Support: Secures the engine to the chassis and rear subframe
• Vibration Isolation: Hydraulic design absorbs engine vibration and noise
• Drivetrain Stability: Maintains correct engine alignment during load changes
• Component Protection: Reduces stress on transmission and exhaust components
Engine mounts are exposed to constant heat, vibration and engine torque. Over time the internal rubber and hydraulic elements can degrade, leading to increased engine movement, cabin vibration and knocking noises during acceleration or shifting.
Replacing worn mounts with a matched OE Match set restores proper drivetrain stability and helps maintain the refined driving characteristics expected from a Porsche.
Replace the engine mounts if you notice:
• Increased vibration inside the cabin
• Clunking or knocking during acceleration or gear changes
• Excessive engine movement when revving
• Visible wear, cracking or leakage from the mount
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99737504908
您正在查看的产品与这些编号存在交叉引用关系
This OE Match engine mount set is designed for Porsche 911 (997.2) Carrera and 997.2 Turbo models without PADM. The kit includes two OE Match engine mounts along with the correct genuine Porsche hexagon bolts and nuts required for a secure, factory-spec installation. Replacing both mounts at the same time restores proper engine support and ensures balanced vibration damping across the drivetrain.
SET OF 2, with bolt and nuts
Fits:
Porsche 997.2 Carrera 2009 - 2012 COUPE
Porsche 997.2 Turbo 2010 - 2013 COUPE without PADM (dynamic engine mounts)
Diagram Ref No 2, 3 and 5
Engine mounts are essential for supporting the engine while isolating vibration and maintaining proper drivetrain alignment.
Kit Includes
2 × OE Match Engine Mount – 99737504908
4 × Genuine Porsche Hexagon Bolt – 90037815901
2 × Genuine Porsche Sleeve / Nut – 9A137542501
This kit contains everything needed to replace both engine mounts during servicing or drivetrain maintenance.
Engine mounts are structural components that connect the engine assembly to the vehicle chassis and rear subframe. The OE Match mount replicates the original Porsche hydraulic mount used in the 997 platform, providing the correct fit, durability and vibration-damping characteristics.
The mounts help stabilise the engine while absorbing drivetrain vibrations generated during acceleration, braking and gear changes. Supplied with genuine Porsche bolts and nuts, this kit ensures proper torque specification and reliable installation.
Function
• Engine Support: Secures the engine to the chassis and rear subframe
• Vibration Isolation: Hydraulic design absorbs engine vibration and noise
• Drivetrain Stability: Maintains correct engine alignment during load changes
• Component Protection: Reduces stress on transmission and exhaust components
Engine mounts are exposed to constant heat, vibration and engine torque. Over time the internal rubber and hydraulic elements can degrade, leading to increased engine movement, cabin vibration and knocking noises during acceleration or shifting.
Replacing worn mounts with a matched OE Match set restores proper drivetrain stability and helps maintain the refined driving characteristics expected from a Porsche.
Replace the engine mounts if you notice:
• Increased vibration inside the cabin
• Clunking or knocking during acceleration or gear changes
• Excessive engine movement when revving
• Visible wear, cracking or leakage from the mount
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99737504908
99737504904
99737504906
99737504908
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
2 x 发动机支架。保时捷 997.1 / 997.2 双门轿跑车 (99737504908/1
4 x 适用于保时捷 986 Boxster 2.7L / 3.2L 和 996 Carrera 3.4L / 3.6L 的下惰轮 M8x60 螺栓 (90037815901
2 x 套筒 - M12x1.5 - 用于发动机支架。保时捷 997.2 Carrera / S / Turbo 2009-13 (9A137542501
价格: €314.58
即将抵达
相关产品
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Information
发动机支架用于发动机支架。
#北环赛道#
适合：
保时捷 356
保时捷 911 912 F/G
保时捷 930
保时捷 914
保时捷 964
保时捷 993
保时捷 996 turbo/GT2/GT3
保时捷 997 turbo/GT2/GT3
吸料管外径D=60mm
参考编号：
00072120100, 000.721.201.00, 000 721 201 00, P201
为了改装您的保时捷发动机，我们提供此发动机支架。法兰表面与悬臂一起连接到安装轴，可安全且同时轻松将发动机连接到滚动发动机支架上。或者，您可以使用发动机支架通过轴承座将发动机安装到工作台上。我们的计划中提供带和不带安装支架的所有经典保时捷的发动机支架。
注意：零件的颜色可能与所示颜色不同。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6898
您正在查看的产品与这些编号存在交叉引用关系
#北环赛道#
适合：
保时捷 356
保时捷 911 912 F/G
保时捷 930
保时捷 914
保时捷 964
保时捷 993
保时捷 996 turbo/GT2/GT3
保时捷 997 turbo/GT2/GT3
吸料管外径D=60mm
参考编号：
00072120100, 000.721.201.00, 000 721 201 00, P201
为了改装您的保时捷发动机，我们提供此发动机支架。法兰表面与悬臂一起连接到安装轴，可安全且同时轻松将发动机连接到滚动发动机支架上。或者，您可以使用发动机支架通过轴承座将发动机安装到工作台上。我们的计划中提供带和不带安装支架的所有经典保时捷的发动机支架。
注意：零件的颜色可能与所示颜色不同。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6898
6898
您正在查看的产品与这些编号存在交叉引用关系
价格: €516.20
库存
产品车辆组
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Information
六角头螺栓M10 x 45 - 多种用途
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
90007437201
您正在查看的产品与这些编号存在交叉引用关系
每件售出
适合:
保时捷 356B / 356C - 1960 年至 1965 年
保时捷 911 - 1978 年至 1989 年
保时捷 924S - 1986 年至 1988 年
保时捷 944 - 1985 年至 1991 年
保时捷 968 - 1992 年至 1995 年
保时捷 928 - 1978 年至 1995 年
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
90007437201
90007437201
您正在查看的产品与这些编号存在交叉引用关系
价格: €2.09
由供应商供货