请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Front stabilizer bar bush 16mm, SET OF 4. Porsche 911 74-77 - 91134379202
91134379202/1KIT
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Information
Front Stabilizer Bar Mounting Bushing / Sway Bar Bushing, SET OF 4.
Size: 16mm
This Stabilizer bar bushing is designed to replace the original 16 mm anti-roll bar mount bush used in Porsche 911 models (1974–1977) models. It secures the stabilizer bar to the chassis, allowing proper flex while isolating vibration and lateral movement.
Fits:
Porsche 911 1974 - 1977
Diagram ref no 23
• Quantity: Set of 4 pieces
• Inner Diameter: 16 mm (designed for 16 mm sway bar)
• Function: Supports and isolates the anti-roll bar from the chassis while allowing controlled movement
• Position: Front suspension — stabilizer bar mounting locations (two per side)
• Symptoms of wear: Squeaking, knocking, excessive body roll, looseness, or sway bar movement
• Benefits: OE-spec material hardness and fit, quieter ride, reduced vibration, restored bar performance, and long-term durability
• Installation: Fit each bushing over the stabilizer bar, seat securely in the bracket cradle, and fasten using the correct factory clamps or straps
Over time, stabilizer (sway) bar bushings are subjected to continuous twisting, compression, and exposure to road debris, heat, and oils. The rubber material gradually hardens, cracks, or deforms, reducing its ability to cushion the stabilizer bar and maintain tension. When this occurs, the bar can move or rattle inside its mounts, leading to reduced cornering stability and increased noise during driving.
Replace this set when:
• You hear clunking or squeaking noises from the front suspension
• The car feels less stable in corners or exhibits excessive body roll
• The bushings show visible cracks, tearing, or softness Performing front suspension repairs or sway bar service
Installing a new set of 4 bushings restores the proper preload and isolation in the stabilizer system — reducing roll, eliminating noise, and bringing back Porsche’s signature steering precision and balance.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
91134379202
您正在查看的产品与这些编号存在交叉引用关系
Size: 16mm
This Stabilizer bar bushing is designed to replace the original 16 mm anti-roll bar mount bush used in Porsche 911 models (1974–1977) models. It secures the stabilizer bar to the chassis, allowing proper flex while isolating vibration and lateral movement.
Fits:
Porsche 911 1974 - 1977
Diagram ref no 23
• Quantity: Set of 4 pieces
• Inner Diameter: 16 mm (designed for 16 mm sway bar)
• Function: Supports and isolates the anti-roll bar from the chassis while allowing controlled movement
• Position: Front suspension — stabilizer bar mounting locations (two per side)
• Symptoms of wear: Squeaking, knocking, excessive body roll, looseness, or sway bar movement
• Benefits: OE-spec material hardness and fit, quieter ride, reduced vibration, restored bar performance, and long-term durability
• Installation: Fit each bushing over the stabilizer bar, seat securely in the bracket cradle, and fasten using the correct factory clamps or straps
Over time, stabilizer (sway) bar bushings are subjected to continuous twisting, compression, and exposure to road debris, heat, and oils. The rubber material gradually hardens, cracks, or deforms, reducing its ability to cushion the stabilizer bar and maintain tension. When this occurs, the bar can move or rattle inside its mounts, leading to reduced cornering stability and increased noise during driving.
Replace this set when:
• You hear clunking or squeaking noises from the front suspension
• The car feels less stable in corners or exhibits excessive body roll
• The bushings show visible cracks, tearing, or softness Performing front suspension repairs or sway bar service
Installing a new set of 4 bushings restores the proper preload and isolation in the stabilizer system — reducing roll, eliminating noise, and bringing back Porsche’s signature steering precision and balance.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
91134379202
91134379202
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
4 x 前稳定杆衬套 16 毫米。保时捷 911 74-77 (91134379202/1
价格: €44.08
库存
相关产品
Information
侧向支撑夹防倾杆。
防倾杆 (ARB) 在车辆的悬架系统中发挥着重要作用，它通过将转弯载荷从车辆的一侧转移到另一侧来帮助减少车身侧倾。
这些衬套通常用橡胶衬套安装在车辆底盘上，确保防倾杆按预期工作。为了防止防倾杆在转弯时在其支架内横向移动，OE 制造商要么将衬套粘合到防倾杆上，要么在防倾杆本身上添加死止动装置，要么仅依靠橡胶的夹紧压力。
但是当这些衬套磨损并需要更换时会发生什么？带有粘合衬套的防倾杆通常是一个昂贵的完整组件，因此替代方案是安装更具成本效益的非粘合聚氨酯替代品，就像我们提供的许多产品一样。
在大多数情况下，衬套的摩擦力会阻止防倾杆左右移动。但是，当急转弯或以较高速度转弯时，横向移动的防倾杆会降低防倾杆的效率和效果，从而以不可预测的方式改变悬架系统的动态。这还存在防倾杆污染车辆或悬架系统其他区域的风险。
价格低至: €46.92