None adjustable thrust arm bushing lower control arm kit for Porsche models cars with lowered suspension. - 358
358
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Information
RSS Lower Control Arm Kit for Porsche Models.
Type: None Adjustable Thrust Arm Bushing
RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.
The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.
Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.
RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.
Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.
Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.
Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).
Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.
Please Check Fitting Guide Before Ordering Click Here
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
358
您正在查看的产品与这些编号存在交叉引用关系
Type: None Adjustable Thrust Arm Bushing
RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.
The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.
Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.
RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.
Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.
Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.
Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).
Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.
Please Check Fitting Guide Before Ordering Click Here
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
358
357
358
99634105307
99634105308
99634105309
99634105310
99634105311
99634105312
99634105313
99634105314
99634105315
99634105316
99634105317
99634112290
99634144190
99634112190
您正在查看的产品与这些编号存在交叉引用关系
€1,166.20
当前 €1,107.89
由供应商供货
安全购物
12 个月保修
全球交付
相关产品
前下叉臂前衬套。保时捷卡宴 955 / 957 / 958
代码: PFF85-1601
产品车辆组
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
Information
前下叉臂前衬套。
成对出售（双臂）
该部件取代了 OEM 部件号：
95834158800 / 7L8407151K / 1160500096
適用於:
保时捷卡宴 955 2003-06
保时捷卡宴 957 2007-10
保时捷卡宴 958 2011-17
单击“放大”可查看大部件图。
图表参考编号 1
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PFF85-1601
您正在查看的产品与这些编号存在交叉引用关系
成对出售（双臂）
该部件取代了 OEM 部件号：
95834158800 / 7L8407151K / 1160500096
適用於:
保时捷卡宴 955 2003-06
保时捷卡宴 957 2007-10
保时捷卡宴 958 2011-17
单击“放大”可查看大部件图。
图表参考编号 1
使用聚氨酯悬架衬套替换橡胶悬架衬套将为您带来以下好处：
- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PFF85-1601
PFF85-1601
PFF851601
95834158800
7L8407151K
1160500096
您正在查看的产品与这些编号存在交叉引用关系
€76.99
当前 €73.14
库存
安全购物
12 个月保修
全球交付
Front lower wishbone rear bush. Porsche Cayenne 955 / 957
代码: PFF85-1702
产品车辆组
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
Information
Front lower wishbone rear bush.
Sold as a pair (both arms)
Size: 60.05mm
This part fits vehicles with a cast steel wishbone, with a rear bush diameter of 60.05mm. For vehicles fitted with a cast aluminium wishbone and 72.05mm bushes please use PFF85-1602.
This part replaces OEM part number:
95534124204 / 7L0407182E / 7L0407182C
Fits:
Porsche Cayenne 955 2003-06
Porsche Cayenne 957 2007-10
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PFF85-1702
您正在查看的产品与这些编号存在交叉引用关系
Sold as a pair (both arms)
Size: 60.05mm
This part fits vehicles with a cast steel wishbone, with a rear bush diameter of 60.05mm. For vehicles fitted with a cast aluminium wishbone and 72.05mm bushes please use PFF85-1602.
This part replaces OEM part number:
95534124204 / 7L0407182E / 7L0407182C
Fits:
Porsche Cayenne 955 2003-06
Porsche Cayenne 957 2007-10
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Replacing your rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PFF85-1702
PFF85-1702
PFF851702
95534124204
7L0407182E
7L0407182C
您正在查看的产品与这些编号存在交叉引用关系
€82.11
当前 €78.00
由供应商供货
安全购物
12 个月保修
全球交付
Front upper wishbone bush. Porsche Cayenne 955 / 957
代码: PFF85-1604
产品车辆组
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
Information
Front upper wishbone bush.
Sold as a pack of 4 (both upper arms)
This part replaces OEM part number:
95534102700 / 95534102701 / 95534102702 / 7L0407077
Fits:
Porsche Cayenne 955 2003-06
Porsche Cayenne 957 2007-10
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PFF85-1604
您正在查看的产品与这些编号存在交叉引用关系
Sold as a pack of 4 (both upper arms)
This part replaces OEM part number:
95534102700 / 95534102701 / 95534102702 / 7L0407077
Fits:
Porsche Cayenne 955 2003-06
Porsche Cayenne 957 2007-10
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
Replacing your rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PFF85-1604
PFF85-1604
PFF851604
7L0407077
95534102700
95534102701
95534102702
您正在查看的产品与这些编号存在交叉引用关系
€135.90
当前 €129.10
由供应商供货
安全购物
12 个月保修
全球交付