请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
您的车辆
Porsche // 997 (911) MK2 2009-2012 // 997 MKII GT3 2010-11
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Category Filter
Pagid RBD 耐力赛浮动前制动盘组件。保时捷 997 GT3 Cup - SD380320
SD380320
产品车辆组
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII GT3 / GT3 RS 2010-11
Information
Pagid RBD 耐力赛浮动前制动盘组件。
仅供赛道使用
适合：
保时捷 997 GT3 杯
比赛申请 -耐力赛
刹车盘直径 - 380mm
刹车盘厚度 - 32mm
前制动盘组件包括
• 前刹车盘
• 安装钟
• 线轴组
线轴和圆盘之间的浮动连接消除了硬质阳极氧化帽的磨损，因此可以重复使用多次。
通过连接圆盘的法兰上适当大小的开口，气流可以进入外部摩擦面。
专门设计的通风室，以优化盘片和冷却气流之间的热交换率。
表面处理（凹槽图案）与 Pagid Racing 刹车片相结合开发，以实现最佳的系统性能和磨损特性。
• 增强性能并延长光盘寿命
• 采用新的驱动系统，组装和操作更加容易
• 优化初始咬合
仅供赛道使用
适合：
保时捷 997 GT3 杯
比赛申请 -耐力赛
刹车盘直径 - 380mm
刹车盘厚度 - 32mm
前制动盘组件包括
• 前刹车盘
• 安装钟
• 线轴组
线轴和圆盘之间的浮动连接消除了硬质阳极氧化帽的磨损，因此可以重复使用多次。
通过连接圆盘的法兰上适当大小的开口，气流可以进入外部摩擦面。
专门设计的通风室，以优化盘片和冷却气流之间的热交换率。
表面处理（凹槽图案）与 Pagid Racing 刹车片相结合开发，以实现最佳的系统性能和磨损特性。
• 增强性能并延长光盘寿命
• 采用新的驱动系统，组装和操作更加容易
• 优化初始咬合
价格低至: €1,047.70
相关产品
产品车辆组
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII GT3 / GT3 RS 2010-11
Information
Pagid RBD endurance racing floating rear brake disc assembly.
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Race Application - Endurance
Brake Disc Diameter - 350mm
Brake Disc Thickness - 28mm
Rear brake disc assembly consists of
• Rear Brake Disc
• Mounting Bell
• Bobbin Set
The floating connection between bobbin and disc eliminates wear on the hard anodized hat so makes it reusable multiple times.
Airflow onto the outside friction face is achieved through the proper sized openings in the connection flange to the disc.
Specially designed ventilation chambers to optimize the thermal exchange rate between disc and cooling airflow.
The surface finish (groove pattern) has been developed in combination with Pagid Racing brake pads for best system performance and wear characteristics.
• Enhanced performance and extended disc life
• Easier assembly and handling due to new drive system
• Optimisation of the initial bite
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Race Application - Endurance
Brake Disc Diameter - 350mm
Brake Disc Thickness - 28mm
Rear brake disc assembly consists of
• Rear Brake Disc
• Mounting Bell
• Bobbin Set
The floating connection between bobbin and disc eliminates wear on the hard anodized hat so makes it reusable multiple times.
Airflow onto the outside friction face is achieved through the proper sized openings in the connection flange to the disc.
Specially designed ventilation chambers to optimize the thermal exchange rate between disc and cooling airflow.
The surface finish (groove pattern) has been developed in combination with Pagid Racing brake pads for best system performance and wear characteristics.
• Enhanced performance and extended disc life
• Easier assembly and handling due to new drive system
• Optimisation of the initial bite
价格低至: €1,047.70
产品车辆组
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII GT3 / GT3 RS 2010-11
Information
Pagid RBD sprint racing floating front brake disc.
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Front brake disc only
Mounting bell and bobbins purchased separately
Race Application - Sprint
Brake Disc Diameter - 380mm
Brake Disc Thickness - 32mm
Inside Diameter - 250mm
Hat Interface PCD - 10 x 228,6
Maximum Pad Depth - 65mm
Vent Opening - 17mm
The floating connection between bobbin and disc eliminates wear on the hard anodized hat so makes it reusable multiple times.
Airflow onto the outside friction face is achieved through the proper sized openings in the connection flange to the disc.
Specially designed ventilation chambers to optimize the thermal exchange rate between disc and cooling airflow.
The surface finish (groove pattern) has been developed in combination with Pagid Racing brake pads for best system performance and wear characteristics.
• Enhanced performance and extended disc life
• Easier assembly and handling due to new drive system
• Optimisation of the initial bite
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Front brake disc only
Mounting bell and bobbins purchased separately
Race Application - Sprint
Brake Disc Diameter - 380mm
Brake Disc Thickness - 32mm
Inside Diameter - 250mm
Hat Interface PCD - 10 x 228,6
Maximum Pad Depth - 65mm
Vent Opening - 17mm
The floating connection between bobbin and disc eliminates wear on the hard anodized hat so makes it reusable multiple times.
Airflow onto the outside friction face is achieved through the proper sized openings in the connection flange to the disc.
Specially designed ventilation chambers to optimize the thermal exchange rate between disc and cooling airflow.
The surface finish (groove pattern) has been developed in combination with Pagid Racing brake pads for best system performance and wear characteristics.
• Enhanced performance and extended disc life
• Easier assembly and handling due to new drive system
• Optimisation of the initial bite
价格低至: €603.19
产品车辆组
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII GT3 / GT3 RS 2010-11
Information
Pagid RBD racing rear brake disc mounting bell.
Sold individually - 2 required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Rear brake disc mounting bell only
Brake disc and bobbins purchased separately
Specification
Type - Mounting Bell
Hat Interface PCD - 12 x 208
Inside Diameter - 103mm
Axle - Rear
Stud bolt Circle - 5 x 130
Offset - 38.8mm
Face Thickness - 6.5mm
Pagid Racing's Mounting Bell provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
Sold individually - 2 required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Rear brake disc mounting bell only
Brake disc and bobbins purchased separately
Specification
Type - Mounting Bell
Hat Interface PCD - 12 x 208
Inside Diameter - 103mm
Axle - Rear
Stud bolt Circle - 5 x 130
Offset - 38.8mm
Face Thickness - 6.5mm
Pagid Racing's Mounting Bell provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
价格: €468.27
由供应商供货
产品车辆组
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MKII GT3 / GT3 RS 2010-11
Information
Pagid RBD racing front brake disc mounting bell.
Sold individually - 2 required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Front brake disc mounting bell only
Brake disc and bobbins purchased separately
Specification
Type - Mounting Bell
Hat Interface PCD - 10 x 228,6
Inside Diameter - 103mm
Axle - Front
Stud bolt Circle - 5 x 130
Offset - 28mm
Face Thickness - 6.5mm
Pagid Racing's Mounting Bell provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
Sold individually - 2 required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Front brake disc mounting bell only
Brake disc and bobbins purchased separately
Specification
Type - Mounting Bell
Hat Interface PCD - 10 x 228,6
Inside Diameter - 103mm
Axle - Front
Stud bolt Circle - 5 x 130
Offset - 28mm
Face Thickness - 6.5mm
Pagid Racing's Mounting Bell provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
价格: €514.25
由供应商供货