请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Category Filter
相关产品
产品车辆组
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
Information
Exhaust tail pipe Porsche 911 GT3 GT3 RS and 911 R
with polished finish
Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R
DOES NOT FIT 997
This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TSPO99112.023.A
您正在查看的产品与这些编号存在交叉引用关系
with polished finish
Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R
DOES NOT FIT 997
This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TSPO99112.023.A
99111125391
99111125395
您正在查看的产品与这些编号存在交叉引用关系
价格: €1,061.85
由供应商供货
产品车辆组
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
Information
Exhaust tail pipe Porsche 911 GT3 GT3 RS and 911 R
with titanium sandblasted finish
Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R
DOES NOT FIT 997
This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - SANDBLASTED TITANIUM
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TSPO99112.023.T
您正在查看的产品与这些编号存在交叉引用关系
with titanium sandblasted finish
Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R
DOES NOT FIT 997
This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - SANDBLASTED TITANIUM
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TSPO99112.023.T
99111125391
99111125395
您正在查看的产品与这些编号存在交叉引用关系
价格: €1,374.16
由供应商供货
产品车辆组
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
Information
Sports exhaust rear silencer titanium straight pipe Porsche 911 GT3 GT3 RS and 911 R 2013-2019
Made from titanium
Straight pipe replaces rear centre silencer
FITS 991.1 and 991.2
Porsche 911 GT3 and GT3 RS 2014-2016
Porsche 911 GT3 and GT3 RS 2017-2019
Porsche 911 R 2016
NOT FOR 997
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Replaces centre silencer and tailpipe trims
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - ROLLED LIP
Tailpipe with external rolled lip
OUTER PIPE DIMENSION - 65mm
CENTRE TIP DIMENSION 50mm
The value refers to the external dimensions of the exhaust end tip
END TIPS FINISH - SANDBLASTED
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance
END TIPS NUMBER AND POSITION - 3 CENTRAL
The end tips emerge from the centre
MATERIAL - TITANIUM
KSTi -1,2 ASN titanium alloy was specifically developed for motorsport exhaust systems. It guarantees excellent resistance to oxidation even at high temperatures, with mechanical characteristics similar to those of grade 2 titanium.
CENTRE SILENCER REMOVAL
Complete removal of the centre silencer minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TSPO991GT317.001.T
您正在查看的产品与这些编号存在交叉引用关系
Made from titanium
Straight pipe replaces rear centre silencer
FITS 991.1 and 991.2
Porsche 911 GT3 and GT3 RS 2014-2016
Porsche 911 GT3 and GT3 RS 2017-2019
Porsche 911 R 2016
NOT FOR 997
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Replaces centre silencer and tailpipe trims
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - ROLLED LIP
Tailpipe with external rolled lip
OUTER PIPE DIMENSION - 65mm
CENTRE TIP DIMENSION 50mm
The value refers to the external dimensions of the exhaust end tip
END TIPS FINISH - SANDBLASTED
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance
END TIPS NUMBER AND POSITION - 3 CENTRAL
The end tips emerge from the centre
MATERIAL - TITANIUM
KSTi -1,2 ASN titanium alloy was specifically developed for motorsport exhaust systems. It guarantees excellent resistance to oxidation even at high temperatures, with mechanical characteristics similar to those of grade 2 titanium.
CENTRE SILENCER REMOVAL
Complete removal of the centre silencer minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TSPO991GT317.001.T
99711102792
99711102799
99111102790
您正在查看的产品与这些编号存在交叉引用关系
价格: €3,872.63
由供应商供货