请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
Sub5Club Store
https://www.pitp.club
您的车辆
Porsche // Cayenne 9YA 2018-2023 // 9YA Cayenne Turbo V8 4.0L Petrol (550Hp) 2020-23
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Category Filter
保时捷Cayenne 9YA 2018-20239YA Cayenne Turbo V8 4.0L Petrol (550Hp) 2020-23维修部件保时捷经典机油
Porsche Classic Motoroil 20W-50 for Porsche 356 / 914 / 911 2.0-2.7L › PCG04321090
Porsche Classic Motoroil 20W-50 for Porsche 356 / 914 / 911 2.0-2.7L - PCG04321090
PCG04321090
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Information
Porsche Classic Motoroil 20W-50.
60L Barrel
For all 356, 914 and 911 models up to the 2.7-litre G-Model, Porsche recommends the multi-grade version with a viscosity of 20W-50.
Back in the 1950s, 1960s and 1970s, engines were built with much more generous tolerances than today, which is why the viscosity of an oil must be low enough for it to penetrate into all areas of the engine as quickly and uniformly as possible during cold starts. At the same time, however, its viscosity must not be so low that a stable lubricating film is no longer present when the engine heats up. The developers went to particular lengths to achieve excellent cold start properties for the oil, so that the engine can be lubricated as quickly as possible when started. The CCS test was especially important in this respect, since it simulates the behaviour of the oil in the crankshaft bearing during cold starts and at low temperatures.
The Porsche Classic 20W-50 is a mineral oil known as a hydrocracked base oil with mildly alloyed additives. Hydrocracked base oils are characterised by a very low level of contaminants, a very low sulphur content and very good oxidation and ageing stability, which prevents deposits, for example. At the same time, the Porsche Classic Motoroil 20W-50 has an extremely high HTHS viscosity (High Temperature, High Shear), which describes the quality of the engine oil at high temperatures (150 °C) in the lubricating gap and with high shear rate (engine speeds). Finally, the excellent shear stability ensures that the optimum lubricating properties are reliably retained at high engine temperatures, even after long periods of operation and under high loads.
In a nutshell: low levels of deposits (at both hot and cold temperatures), optimum care for classic engines and excellent compatibility with the special materials found in these engines such as cork seals or leaded bearing shells.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PCG04321090
您正在查看的产品与这些编号存在交叉引用关系
60L Barrel
For all 356, 914 and 911 models up to the 2.7-litre G-Model, Porsche recommends the multi-grade version with a viscosity of 20W-50.
Back in the 1950s, 1960s and 1970s, engines were built with much more generous tolerances than today, which is why the viscosity of an oil must be low enough for it to penetrate into all areas of the engine as quickly and uniformly as possible during cold starts. At the same time, however, its viscosity must not be so low that a stable lubricating film is no longer present when the engine heats up. The developers went to particular lengths to achieve excellent cold start properties for the oil, so that the engine can be lubricated as quickly as possible when started. The CCS test was especially important in this respect, since it simulates the behaviour of the oil in the crankshaft bearing during cold starts and at low temperatures.
The Porsche Classic 20W-50 is a mineral oil known as a hydrocracked base oil with mildly alloyed additives. Hydrocracked base oils are characterised by a very low level of contaminants, a very low sulphur content and very good oxidation and ageing stability, which prevents deposits, for example. At the same time, the Porsche Classic Motoroil 20W-50 has an extremely high HTHS viscosity (High Temperature, High Shear), which describes the quality of the engine oil at high temperatures (150 °C) in the lubricating gap and with high shear rate (engine speeds). Finally, the excellent shear stability ensures that the optimum lubricating properties are reliably retained at high engine temperatures, even after long periods of operation and under high loads.
In a nutshell: low levels of deposits (at both hot and cold temperatures), optimum care for classic engines and excellent compatibility with the special materials found in these engines such as cork seals or leaded bearing shells.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PCG04321090
00004320928
00004320929
00004320990
00004320980
PCG04321090
您正在查看的产品与这些编号存在交叉引用关系
价格: €832.48
由供应商供货
回到顶部
您已成功订阅我们的邮件列表
价格匹配保证
全球配送
12 个月保修