适用于保时捷 997 4WD 的顶部安装套件密封外倾角板 - SUSPENSIONKIT21
SUSPENSIONKIT21
产品车辆组
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Information
顶部安装套件
工厂橡胶衬套支架的终极替代品。兼容 OE 和售后支柱。安装孔允许超过 1 度的额外负外倾角。CNC 加工的 6061 黑色阳极氧化铝结构，带不锈钢硬件。减少急转弯时前轮外倾角变化，以保持最佳轮胎接触，从而提高牵引力。
工厂橡胶衬套支架的终极替代品。兼容 OE 和售后支柱。安装孔允许超过 1 度的额外负外倾角。CNC 加工的 6061 黑色阳极氧化铝结构，带不锈钢硬件。减少急转弯时前轮外倾角变化，以保持最佳轮胎接触，从而提高牵引力。
适合：
保时捷 997.1 C4 / C4S
保时捷 997.2 C4 / C4S
关于此套件
该套件包括以下商品:
1 x Front monoball shock top mount - Set of 2 for Porsche 996 / 997 C4 (360250996F4
1 x 后单球减震器顶部支架 - 两套，适用于保时捷 997 (360250997R
价格: £649.00
库存
相关产品
产品车辆组
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
Information
Offset camber plates.
Sold as a pair - 1 pair, required per car
Fits Front
Porsche 981 Boxster and Cayman
Porsche 718 Boxster and Cayman
Porsche 991 Carrera, Carrera 4
Porsche 991 Carrera S, Carrera 4S
More Camber and Caster
Our offset front camber plates allow for additional camber and castor over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory type struts, including those equipped with PASM.
These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The Teflon lined spherical bearings used in our kit are entirely maintenance free and require no supplemental lubrication. These plates are sealed to prevent contamination from water or grime, thus extending bearing life. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended abuse on the race track.
Higher Performance
Spherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons
– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Use Stock Springs or Coilovers
Fully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
21522
您正在查看的产品与这些编号存在交叉引用关系
Sold as a pair - 1 pair, required per car
Fits Front
Porsche 981 Boxster and Cayman
Porsche 718 Boxster and Cayman
Porsche 991 Carrera, Carrera 4
Porsche 991 Carrera S, Carrera 4S
More Camber and Caster
Our offset front camber plates allow for additional camber and castor over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory type struts, including those equipped with PASM.
These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The Teflon lined spherical bearings used in our kit are entirely maintenance free and require no supplemental lubrication. These plates are sealed to prevent contamination from water or grime, thus extending bearing life. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended abuse on the race track.
Higher Performance
Spherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons
– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Use Stock Springs or Coilovers
Fully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
21522
2152207
2152211
99134301502
您正在查看的产品与这些编号存在交叉引用关系
价格低至: £750.00
产品车辆组
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Information
前单球减震器支架（外倾角板）一对
#罗勒#
适合:
保时捷 991.1 Carrera / Turbo
保时捷 991.2 Carrera / Turbo
保时捷 981 Boxster（包括 Spyder）和 981C Cayman
保时捷 982 Boxster 和 982C Cayman
这些支架不适合 GT3 或 GT4 型号
专为街道和赛道使用而设计。外倾角调节比原厂设置额外增加1.1度，无需将控制臂升级到GT3风格。适用于使用原厂减震器以及任何与原厂支架兼容的售后市场的车辆，这是获得外倾角最简单易行的方法。此外，通过在支柱顶部而不是控制臂处进行外倾角调整，可以最大限度地减少主销后倾角的变化，从而简化设置并最大限度地减少必要的改装。
• 与工厂和售后市场的减震器和弹簧套件（PSS10、KW 等）兼容
• 外倾角调节范围增加 1.1 度
• 精密单球轴承，牢固夹紧到位
• 减少外倾角变化并提高操控性
• CNC 加工
• 轴承无噪音
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3602509911
您正在查看的产品与这些编号存在交叉引用关系
#罗勒#
适合:
保时捷 991.1 Carrera / Turbo
保时捷 991.2 Carrera / Turbo
保时捷 981 Boxster（包括 Spyder）和 981C Cayman
保时捷 982 Boxster 和 982C Cayman
这些支架不适合 GT3 或 GT4 型号
专为街道和赛道使用而设计。外倾角调节比原厂设置额外增加1.1度，无需将控制臂升级到GT3风格。适用于使用原厂减震器以及任何与原厂支架兼容的售后市场的车辆，这是获得外倾角最简单易行的方法。此外，通过在支柱顶部而不是控制臂处进行外倾角调整，可以最大限度地减少主销后倾角的变化，从而简化设置并最大限度地减少必要的改装。
• 与工厂和售后市场的减震器和弹簧套件（PSS10、KW 等）兼容
• 外倾角调节范围增加 1.1 度
• 精密单球轴承，牢固夹紧到位
• 减少外倾角变化并提高操控性
• CNC 加工
• 轴承无噪音
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3602509911
99134301502
982199131
982199131D
991FSMT-CS
您正在查看的产品与这些编号存在交叉引用关系
价格: £395.00
库存