价格匹配保证
全球配送
12 个月保修
前悬挂连接杆及衬套
按品牌过滤
使用标准支撑衬套的悬架重建套件。保时捷 911 / 911 turbo 1977 - 1985
代码: SUSPBUSHKIT/3
产品车辆组
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
衬套套件悬架重建。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SUSPBUSHKIT
您正在查看的产品与这些编号存在交叉引用关系
前桥和后桥
适合:
保时捷 911 - 1977 年至 1986 年
保时捷 911 Turbo - 1977 年至 1988 年
采用标准 Shore 等级（未升级）的悬架衬套重建套件
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SUSPBUSHKIT
91134101800
91150193300
91150193400
99952310301
90006706302
91134379203
90133105900
477411313B
477411313N
93033307100
93033307101
93033307200
93033307201
90008203502
90091004602
99908443909
99908444509
99908444501
N0101563
PCG01015630
91134190101
91134190201
93034190101
93034190201
91133300900
91133300905
91133352100
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
4 x 稳定杆衬套，前部 20 毫米。保时捷 911 74-86 (91134379203/1
1 x 前控制/A 臂衬套套件。保时捷 911/912/914 (91134190100/2
2 x 适用于保时捷 911 1970>> / 930 / 914 的前部支架 (91134101800/1
2 x 后部可调弹簧板。保时捷 911 1976-86 915 变速箱 (91133300905/1
4 x 拖曳臂顶部消音器块。每件均售出。保时捷 911/912 (90133105900/1
4 x Shock absorber mount ring. Porsche 911/912 / 356 (91133352100
2 x 适用于保时捷 911 / 944 / 964 / 968 / 993 的稳定杆衬套 18 毫米 (477411313N/1
1 x 后下拉杆。保时捷 911 1978-89 / 930 1978-89（93033307101、93033307201） (93033307101/2
1 x 后下拉杆。保时捷 911 1978-89 / 930 1978-89（93033307101、93033307201） (93033307201/2
€823.99
当前 €700.39
库存
安全购物
12 个月保修
全球交付
使用标准支撑衬套的悬架重建套件。保时捷 911 turbo 1989 G50
代码: SUSPBUSHKIT/5
产品车辆组
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
衬套套件悬架重建。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SUSPBUSHKIT
您正在查看的产品与这些编号存在交叉引用关系
前桥和后桥
适合:
保时捷 911 Turbo - 1989 年 - G50 变速箱
采用标准 Shore 等级（未升级）的悬架衬套重建套件
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SUSPBUSHKIT
91134101800
91134388100
90133105900
477411313B
477411313N
93033307100
93033307101
93033307200
93033307201
91134190100
93034190101
93034190201
91133300902
91133300906
91133352100
91150193300
91150193400
99952310301
90006706302
90006706303
N0101563
PCG01015630
90008203502
90091004602
99908443909
99908444509
99908444501
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
4 x 稳定杆衬套 22 毫米。保时捷 911 84-89 (91134388100/1
1 x 前控制/A 臂衬套套件。保时捷 911/912/914 (91134190100/2
2 x 适用于保时捷 911 1970>> / 930 / 914 的前部支架 (91134101800/1
2 x 标准后弹簧板。1987-89 年款保时捷 911，配备 G50 变速箱 (91133300906/1
4 x 拖曳臂顶部消音器块。每件均售出。保时捷 911/912 (90133105900/1
4 x Shock absorber mount ring. Porsche 911/912 / 356 (91133352100
2 x 适用于保时捷 911 / 944 / 964 / 968 / 993 的稳定杆衬套 18 毫米 (477411313N/1
1 x 后下拉杆。保时捷 911 1978-89 / 930 1978-89（93033307101、93033307201） (93033307101/2
1 x 后下拉杆。保时捷 911 1978-89 / 930 1978-89（93033307101、93033307201） (93033307201/2
€1,023.91
当前 €870.32
即将抵达
安全购物
12 个月保修
全球交付
Front and Rear QuickChange™ Blade Style Sway bar. Porsche 911 / 912 / 930 / 914
代码: 227002
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
Front QuickChange™ Blade Style Sway bar
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
227002
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
227002
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
2270020
2270022
您正在查看的产品与这些编号存在交叉引用关系
价格低至: €1,582.70
安全购物
12 个月保修
全球交付
聚氨酯悬架衬套套件。保时捷 911 1974 - 85 SuperPro
代码: KIT5217K
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
SuperPro 聚氨酯悬架衬套套件。
#超级职业选手#
适合：
保时捷 911 1974-85 车型，前防倾杆为 18 毫米，后防倾杆为 22 毫米
该套件包括
1 x SPF0893K 齿轮连杆衬套套件 2 个衬套、SuperPro 润滑脂
1 x SPF1436K 前支柱安装衬套套件 2 个衬套、2 根钢管、SuperPro 润滑脂
1 x SPF0526K 前稳定杆连杆衬套套件 4 个衬套、SuperPro 润滑脂
1 x SPF1450-18K 前稳定杆至横梁安装套件 2 个衬套、SuperPro 润滑脂
1x SPF0236AK 前扭力杆枢轴衬套套件 4 个衬套、SuperPro 润滑脂
1 x SPF1375K 后发动机安装衬套套件 4 个衬套、2 根钢管、SuperPro 润滑脂
1 x SPF0095-22K 后稳定杆底部连杆衬套套件 2 个衬套、SuperPro 润滑脂
1 x SPF0134-22K 后稳定杆至底盘衬套 2 个衬套，SuperPro 润滑脂
1 x SPF0236K 扭力杆枢轴衬套套件 4 个衬套、SuperPro 润滑脂
1 x SPF0988K 后拖曳臂（香蕉臂）前衬套套件 4 个衬套、SuperPro 润滑脂
使用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来：
- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长。
#超级职业选手#
适合：
保时捷 911 1974-85 车型，前防倾杆为 18 毫米，后防倾杆为 22 毫米
该套件包括
1 x SPF0893K 齿轮连杆衬套套件 2 个衬套、SuperPro 润滑脂
1 x SPF1436K 前支柱安装衬套套件 2 个衬套、2 根钢管、SuperPro 润滑脂
1 x SPF0526K 前稳定杆连杆衬套套件 4 个衬套、SuperPro 润滑脂
1 x SPF1450-18K 前稳定杆至横梁安装套件 2 个衬套、SuperPro 润滑脂
1x SPF0236AK 前扭力杆枢轴衬套套件 4 个衬套、SuperPro 润滑脂
1 x SPF1375K 后发动机安装衬套套件 4 个衬套、2 根钢管、SuperPro 润滑脂
1 x SPF0095-22K 后稳定杆底部连杆衬套套件 2 个衬套、SuperPro 润滑脂
1 x SPF0134-22K 后稳定杆至底盘衬套 2 个衬套，SuperPro 润滑脂
1 x SPF0236K 扭力杆枢轴衬套套件 4 个衬套、SuperPro 润滑脂
1 x SPF0988K 后拖曳臂（香蕉臂）前衬套套件 4 个衬套、SuperPro 润滑脂
使用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来：
- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长。
€535.56
当前 €519.49
即将抵达
安全购物
12 个月保修
全球交付
Sway bar backdate mounting kit. Porsche 911 / 912 / 930 / 914
代码: 2270025_2270024
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
Sway bar backdate mounting kit
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2270025_2270024
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2270025_2270024
2270025_2270024
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
您正在查看的产品与这些编号存在交叉引用关系
€85.68
当前 €81.40
由供应商供货
安全购物
12 个月保修
全球交付
Sway bar mounting backer plate kit. Porsche 911 / 912 / 930 / 914
代码: 2270024
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Information
Sway bar mounting backer plate kit
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2270024
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2270024
2270024
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
您正在查看的产品与这些编号存在交叉引用关系
€65.45
当前 €62.18
由供应商供货
安全购物
12 个月保修
全球交付
显示从1到6（共6个产品）
也可在这些页面找到
您可能也喜欢
流行车型
