添加剂及增强剂


BG244 will restore performance, improve MPG and reduce emissions.
Regular use of BG244 (approximately every 10,000 miles) will reduce deposit build up in the diesel particulate filter, reducing maintenance costs.
BG 244 for diesel engines.
Designed for all types diesel engine including PD (Unit Injector) and common rail, BG 244 (BG244) quickly and effectively cleans diesel fuel injectors. It smoothes engine idle and helps prevent costly repairs. In only a few short miles of driving, engine response is restored.
One can (325mL) of BG 244 treats up to 60 litres diesel fuel. To maintain fuel system cleanliness and engine performance, add BG 244 to fuel tank at 7,500 to 9,000 mile (12,000?14,500 km) intervals. Catalytic converter, oxygen sensor and diesel particulate filter safe.
This product is perfectly safe for all diesel engines including those with turbo chargers and particulate filter systems.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BG245
您正在查看的产品与这些编号存在交叉引用关系





Compression will increase with removal of these deposits. BG109 also lowers exhaust emissions, eliminates oil consumption associated with sludge and other deposit build up and improves overall power and economy. Safe for use in petrol, diesel and rotary engines










Modern operating conditions of a car in the urban cycle (warm-ups, start-stop, short trips, extended intervals between oil changes) and high operating temperatures lead to a rapid depletion of the required additive package in the engine oil. This leads to the accumulation of more unburned fuel and other combustion products in the engine oil, which leads to the rapid oxidation of engine oils. Oxidation causes oil to thicken and deposits in the crankcase, oil filter, oil passages and other critical internal engine surfaces.
BG Advanced Formula MOA® Engine Oil Conditioner is designed to maximize the performance of synthetic and mineral engine oils and extend engine oil life.
The product prevents oxidation and an increase in the viscosity of the engine oil even under high load conditions.
Keeps compression rings, lifters, tensioners and other engine components clean for long engine life and lowers maintenance costs.
Excellent for gasoline engine use.
Compatible with synthetic and mineral motor oils.
Benefits:
increases the strength of the oil film
prevents oxidation and oil thickening
prevents the formation of sludge and varnish deposits when driving in the urban cycle
protects against rust and corrosion
provides increased power and performance
reduces harmful emissions into the atmosphere
Excellent long-term protection of engine parts against wear!
Used by:
Restoring the elasticity of the elements of the oil system of a gasoline engine
Restoring the elasticity of the elements of the oil system of a diesel engine
Engine oil protection
Mode of application:
For continuous engine protection, add one can (325 ml) of 4-5 liters of engine oil at every oil change
Add to the crankcase in the event of a drop in the oil level to enhance its properties between replacements
Do not overfill the crankcase





177 ml
• Reduces temperatures in Transmission,
• Reduces wear,
• Reduces noise in Limited Slip, differentials,
• Improves manual transmission characteristics,
• Reduces maintenance costs,
• Improves water separation,
• Extends oil life





燃料添加剂(性能添加剂)
250毫升
描述
高规格柴油处理,可提高燃烧效率和发动机清洁度。
应用
适用于所有柴油车辆,包括符合欧 IV/V 标准的现代发动机。加油前将所有内容物倒入油箱以确保充分混合。一瓶可处理 60 升燃油。
用户利益
• 适用于所有柴油发动机,特别是符合欧IV排放标准的车辆。
• 增强型清洁套装,可更快地进行清理并延长喷油器的清洁时间。
• 将柴油的十六烷值提高多达 5 个数字,这也为车辆性能带来了切实的改善。
• 改善燃烧和发动机清洁度,大幅减少碳氢化合物 (HC) 和二氧化碳的排放。
典型特征:
- 比重(15°C 时)- 0.84
- 运动粘度(40°C,cSt)- 2.5
- 闪点 - 75°C
- 颜色外观气味 - 淡棕色





燃料添加剂(性能添加剂)
250毫升
描述
辛烷值助推器和清洁剂套装,可将无铅燃料的辛烷值提高 3 个。
应用
适用于所有汽油发动机车辆。将瓶中的液体加入 60 升汽油中。
用户利益
• 燃料辛烷值最多可提高 3 个数字。提高动力和燃油效率。提高汽油喷射器的效率和清洁度
• 化油器内部组件和喷嘴更加清洁。进气歧管和阀门清洁度得到改善。减少燃烧室沉积物
• 有助于控制燃油系统的腐蚀。保持催化剂效率并有助于激活催化转化器。改善燃烧和发动机清洁度,大幅减少碳氢化合物 (HC)、二氧化碳 (CO2) 和一氧化二氮 (NOx) 的排放
• 非常适合用作 MOT 测试前的清理处理
典型特征:
- 比重(15°C 时)- 0.84
- 运动粘度(40°C,cSt)- 2.5
- 闪点 - 6.6°C
- 颜色外观气味 - 淡棕色





燃料添加剂(性能添加剂)
500毫升
描述
辛烷值助推器和清洁剂套装,可将无铅燃料的辛烷值提高 2 个。
应用
适用于所有汽油发动机。按 1 份对 1000 份(1ml/l)的比例添加到燃料中。
用户利益
• 燃料辛烷值提高 2 个数字。提高汽油喷射器和化油器喷嘴的效率和清洁度
• 高效清洁剂套装,用于清洁和维护发动机和燃油系统内的“全新状态”。减少燃烧室沉积物并改善进气歧管和阀门的清洁度
• 减少碳氢化合物 (HC) 和二氧化碳的排放。保持催化剂效率并可能激活催化转化器
• 测试表明,性能更出色、发动机运行更平稳、燃油消耗得到改善
典型特征:
- 比重(15°C 时)- 0.943
- 运动粘度(40°C,cSt)- 16.6
- 闪点 - 66°C
- 颜色外观气味 - 淡黄色/橙色






MOTUL 发动机冲洗液适用于所有类型的汽油和柴油发动机,无论是自然吸气式还是涡轮增压式,并且与后处理系统兼容,无论燃料类型如何。
它能有效清除发动机中的沉积物和堵塞物,并在换油过程中将排出的微粒冲洗掉。
在清洁过程中,它提供最佳润滑,有助于防止发动机磨损、减少燃料消耗和降低排放。
便于使用:
每次换油前,只需将其添加到温热的发动机油中,让发动机怠速约 15 分钟,然后排出机油并更换机油和机油滤清器。






有效清除燃油系统中的污垢和堵塞物
- 性能恢复:恢复发动机的原始功率和性能。
- 效率:减少燃料消耗并降低废气排放。
- 通用兼容性:适用于所有类型的汽油发动机。
描述:
MOTUL 燃油喷射器清洁剂汽油是一种强效的固化添加剂,适用于所有类型的汽油发动机,无论是配备喷射系统还是化油器,自然吸气还是涡轮增压,带或不带催化转化器。它与所有汽油燃料兼容,包括含铅、无铅、液化石油气、乙醇和生物燃料,并与 E10 燃料(10% 乙醇)无缝配合。
这种添加剂可有效清除整个燃油系统中的污垢和堵塞物,解决喷油器喷嘴污垢、冷凝、喷油器或化油器粘胶以及燃烧室和进气阀沉积物等问题。
MOTUL 燃油喷射器清洁剂汽油还可确保清洁过程中的出色润滑,防止去除的微粒重新沉积。












RON 最多可提高 2 个点,增强发动机的抗爆震性和燃烧稳定性
- 提升性能:提高发动机功率并增强驾驶乐趣。
- 增强启动和加速性能:提供更平稳、更灵敏的驾驶体验。
- 适合低质量燃料和冬季条件:特别推荐在燃料质量较低和寒冷季节使用。
描述:
MOTUL 辛烷值增强剂汽油是一种辛烷指数增强剂,适用于所有类型的汽油发动机,包括间接或直接喷射、化油器、涡轮增压或自然吸气,带或不带催化转换器。它与所有汽油燃料兼容,包括含铅、无铅、液化石油气、乙醇和生物燃料。通过将辛烷值 (RON - 研究辛烷值) 提高最多 2 个点,
MOTUL 辛烷值增强剂汽油可改善燃烧、提高性能并防止发动机爆震和异常燃烧事件。





Uses combustion enhancer CE+ which helps the fuel to burn more completely reducing CO2 emissions and diesel noise. It helps the engine to run more smoothly, increasing acceleration and reducing black smoke.
Benefits & Features:
• Cleans injectors and restores spray pattern
• Improves the ignition quality and combustion of diesel fuel
• Facilitates cold starting
• Reduces diesel knocking noises and soot particulates
• Cleaner fuel reduces black exhaust smoke
• Cleans and protects the entire fuel system against rust and corrosion
• Prevents fouling of the fuel filter
• Recommended for all diesel engines with or without a turbo charger
• Lubricates pumps and injectors and compensates for the reduced lubrication of low sulphur diesel
Directions of use:
Pour contents of bottle into fuel tank then fill tank with fuel. For best results use at each tank fill or monthly intervals. This product will not harm engine fuel if overdosed.





An iron based organometallic additive for all diesels fitted with a Diesel Particulate Filter. It aids filter regeneration by lowering the combustion temperature of soot deposits. This extends filter life, lowers soot emissions and improves performance.
Benefits & Features:
• Clears and regenerates blocked soot filters without dismantling
• Complete burn-off of soot particles during driving
• Avoids frequent maintenance costs related to the manual regeneration of the blocked soot filter
• Especially suited for city driving cycles
• Can be used in combination with built-in regeneration systems
• Ultra-fast result
Directions of use:
Pour contents of bottle into fuel tank then fill tank with fuel as normal. For best results use at every vehicle service.





Is a specially formulated oil additive for petrol and diesel engines. It lubricates the valves as well as helping to remove deposits that cause noise and effect engine efficiency.
Benefits & Features:
• Suitable for petrol and diesel engines
• Restores efficient working of hydraulic valve lifters
• Lubricates and releases sticking valves
• Reduces valve train noise
• Restores lost power
• Is safe for use with catalytic converters and turbochargers
• 100% oil soluble - contains no solid particles
• Compatible with mineral and synthetic engine oils
Directions of use:
Pour contents of bottle into the engine oil when engine is warm. For best results use at every vehicle service.





Effectively finds and seals leaks in the radiator and cooling system. The formulation remains active, preventing future leaks and build-up of rust and corrosion. Seals all leaks in coolant system; Radiator, Heater Matrix, Core Plugs, Thermostat Housings and more.
Benefits & Features:
• Stops radiator and cooling leaks
• Seals existing & prevents future leaks
• Conditions cooling system
• Inhibits rust and corrosion
• Lubricates water pump seal
• Helps prevent clogging
Directions of use:
Run the engine to warm the coolant system. After shaking the bottle well, pour the contents into the radiator. Run the engine for a few minutes to allow the system to circulate & seal leaks. Top up the coolant if required. Treats a cooling system of up to 12 litres.


