Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Brembo
Brembo for Porsche
Brembo, founded in Italy and known worldwide for high-performance braking, supplies systems for many performance and racing cars, including Porsche. At Design911 we offer an extensive range of Brembo brake parts for Porsche, backed by expert advice and dedicated Porsche experience to help you choose the right setup
A Quick Look at Brembo
Brembo information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Brembo is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, axle (front or rear), brake system option, and wheel/clearance notes where relevant.
- Typical reasons to choose or upgrade: address brake fade, inconsistent pedal feel, or increase confidence and heat capacity for fast road or track use.
- Common symptoms pointing to brake work: squeal, vibration, long pedal after hard use, uneven pad wear and heat marking on discs and pads.
- Practical tips: pair quality pads, discs and fluid, clean hubs carefully, torque wheels correctly, and follow the recommended bedding-in procedure.
- Fitment checks: confirm wheel and caliper clearance, pad shape and sensor type against the original parts before installation.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, increased stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
Brake Pads & Disc Package — Combined pad and disc packages provide a matched set to refresh the braking system in one go, helping maintain balanced performance across the axle. Old systems often show disc lip wear, pad glazing, noise, vibration and reduced initial bite after heavy use.
Brake Pads Packages — Brake pad packages group front and/or rear sets so you can renew all pads together for consistent feel and stability. Worn pads can cause squealing, longer stopping distances, low pedal feel and may score discs if driven down to the backing plates.
Brake Calipers — Calipers are replaced or upgraded when originals seize, leak or when you move to larger multi-piston units for higher performance. Typical issues include uneven pad wear, sticking pistons, fluid leaks, a soft pedal and pulling under braking.
Special Offer Parts — Special offers are useful when tackling common Porsche wear items and refreshing multiple parts in one visit. Purchases are often driven by symptoms like squealing brakes, tired dampers or ageing rubber, helping reduce repeat labour while keeping quality high.
Explore Brembo at Design911
View the current Brembo range for Porsche at Design911, then filter by model and category to narrow down to the right parts for your car.
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Front Brake Disc & Brake Pad Package
Restore the stopping power of your Porsche with this Front Brake Disc & Brake Pad Package. This complete brake service kit combines premium replacement components from trusted manufacturers, making it the ideal solution for scheduled maintenance or replacing worn braking components.
Fits:
- Porsche 992.1 Carrera 2S 3.0L 2019-24
- Porsche 992.1 Carrera 4S 3.0L 2019-24
- Porsche 992.1 Carrera 2S Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S 3.0L 2020-24
The package includes:
- 2 x ABS 350x34mm Front Brake Discs
- 1 x Set of Brembo Front Brake Pads
- 2 x Brake Pad Wear Warning Wires
Manufactured to OE specifications, the ABS brake discs deliver precise fitment, excellent durability and efficient heat dissipation. They are perfectly complemented by Brembo brake pads, renowned worldwide for their exceptional braking performance, consistent friction characteristics and excellent pedal modulation. Completing the kit are two new brake wear warning wires, ensuring the brake wear monitoring system continues to operate correctly.
Replacing the entire front brake assembly together guarantees optimum compatibility between components and restores the braking confidence expected from a Porsche 911.
What Does This Brake Package Do?
The front brakes are responsible for generating most of your Porsche's braking force, providing controlled deceleration in both everyday driving and high-performance situations.
Each component performs a specific function:
- Brake
discs provide the rotating friction surface.
- Brake
pads create the friction required to slow and stop the vehicle.
- Brake wear warning wires monitor pad thickness and activate the dashboard warning when replacement is due.
Working together, they ensure smooth, reliable and predictable braking performance.
Why Do Brake Components Wear?
Brake discs and pads are consumable items that naturally wear with use.
Their lifespan is influenced by:
- Frequent braking
- Fast road driving
- Stop-start traffic
- Heat generated during repeated braking
- Vehicle weight Overall mileage
As the friction material wears away and the discs gradually lose thickness, braking performance begins to decline. Continuing to drive with excessively worn components can increase stopping distances and reduce overall braking efficiency.
Why Replace the Complete Kit?
Replacing the discs, pads and wear sensors together provides the best results and helps avoid premature wear of new components.
Key benefits include:
- Restores original braking performance
- Allows new pads to bed evenly onto fresh disc surfaces
- Improves pedal feel and braking consistency
- Reduces brake vibration and unwanted noise
- Ensures the brake wear warning system functions correctly
- Extends the service life of the braking components
- Saves time and labour by completing the service in one installation
A complete brake overhaul provides greater reliability and long-term value than replacing individual components separately.
When Should This Kit Be Replaced?
A complete front brake service is recommended when:
- The brake pad wear warning light illuminates
- Brake pads reach their minimum service thickness
- Brake discs are below the manufacturer's wear limit
- Disc faces become heavily scored or heat damaged
- Brake judder or vibration is noticeable
- Pedal feel deteriorates
- Scheduled servicing identifies excessive wear
Replacing all braking wear components together ensures your Porsche continues to perform safely and confidently under all driving conditions.
Porsche 992 Carrera S Complete Front Brake Kits
Maintaining the braking system is one of the most important aspects of Porsche ownership. Replacing brake discs, pads and wear sensors as a complete package ensures all components work together from day one, improving braking consistency while reducing the risk of uneven wear.
This package combines durable ABS brake discs with Brembo's renowned friction technology, delivering a balanced combination of braking performance, pedal feel and reliability. Ideal for routine servicing or a complete front brake overhaul, it restores the responsive braking characteristics expected from the Porsche 992 Carrera S, Carrera 4S and Targa 4S.
Whether your Porsche is used for commuting, touring or enthusiastic weekend driving, this complete brake package offers excellent quality and outstanding value.
Benefits of This Brake Package
- Complete front brake service in one package
- OE-quality ABS brake discs
- Premium Brembo brake pads
- New brake wear warning wires included
- Excellent braking performance
- Consistent pedal response
- Reduced installation time
- Great value compared with buying parts individually
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT992S.1.F.BRE
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Front Brake Disc & Brake Pad Package
Maintain the exceptional braking performance of your Porsche with this premium Front Brake Disc & Brake Pad Package. Combining high-quality components from two of the world's leading braking manufacturers, this kit provides a complete solution for restoring braking performance, safety and driver confidence.
Fits:
- Porsche 992.1 Carrera 2S 3.0L 2019-24
- Porsche 992.1 Carrera 4S 3.0L 2019-24
- Porsche 992.1 Carrera 2S Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S 3.0L 2020-24
The package includes:
- 2 x Zimmermann Formula Z 350x34mm Front Brake Discs
- 1 x Set of Brembo Front Brake Pads
- 2 x Brake Pad Wear Warning Wires
Zimmermann Formula Z brake discs are manufactured to exacting OE standards, offering outstanding dimensional accuracy, excellent heat management and long service life. Paired with Brembo's high-performance brake pads, renowned for their progressive pedal feel, excellent stopping power and low fade characteristics, this package delivers the braking performance expected from the Porsche 992 Carrera S range.
Replacing every major front brake wear component together ensures optimum compatibility, maximum braking efficiency and a professional-quality brake service.
How Does This Brake Package Work?
The front braking system converts the vehicle's kinetic energy into heat, allowing your Porsche to slow quickly and safely under all driving conditions.
Working together as a complete system, these components deliver smooth, predictable braking with excellent pedal response.
Why Do Brake Components Need Replacing?
Brake discs and pads are consumable items designed to wear gradually through normal use.
Typical causes of wear include:
- Repeated braking
- Fast road driving
- Heavy vehicle loads
- High operating temperatures
- Stop-start traffic
- General mileage accumulation
Over time, brake pads lose friction material while the brake discs wear thinner. If left beyond their service limits, braking performance, pedal feel and overall safety can be compromised.
Why Replace Everything at the Same Time?
Replacing the complete front brake assembly offers significant advantages over changing individual components.
Benefits include:
- Restores balanced braking performance
- Allows new pads to bed evenly against fresh disc surfaces
- Minimises brake noise and vibration
- Ensures accurate brake wear monitoring
- Prevents premature wear of new components
- Reduces repeat labour costs
- Delivers consistent braking characteristics
A complete brake service provides the most reliable and cost-effective long-term solution.
When Should This Brake Kit Be Replaced?
Replacement is recommended when:
- Brake pad wear indicators activate
- Pads have reached their minimum service thickness
- Brake discs are below the minimum allowable thickness
- Disc surfaces become scored or heat marked
- Brake judder develops
- Pedal feel becomes inconsistent
- A scheduled brake service is due
Replacing the discs, pads and sensors together ensures your Porsche continues to deliver the precise braking performance it was engineered to provide.
Porsche 992 Carrera S Complete Front Brake Kits
Replacing the front braking system as a complete package ensures every wear component begins its service life together, helping maintain optimum braking balance and extending the lifespan of the new parts.
This package combines the engineering excellence of Zimmermann Formula Z brake discs with the performance and reliability of Brembo brake pads, creating a premium braking solution that delivers excellent stopping power, smooth modulation and dependable performance in both everyday driving and more demanding conditions.
Ideal for routine servicing or a complete front brake overhaul, this package provides outstanding value while maintaining the high braking standards expected of a Porsche.
Benefits of This Brake Package
- Complete front brake service solution
- Zimmermann Formula Z premium brake discs
- Brembo high-performance brake pads
- New brake wear warning wires included
- Restores factory braking characteristics
- Excellent resistance to heat and brake fade
- Smooth, progressive pedal feel
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT992S.F.BRE
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Front Brake Disc & Brake Pad Package
Maintain the outstanding braking performance of your Porsche
with this complete Front Brake Disc & Brake Pad Package, designed
specifically for the Porsche 992.1 GTS and 992.2 GTS.
Fits:
- Porsche 992.1 Carrera GTS 3.0L 2019-24
- Porsche 992.1 Carrera GTS 3.0L 2019-24
- Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 GTS 3.0L 2020-24
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
This premium service kit includes everything required to
restore the front braking system to optimum condition:
- 2
x SHW 408x36mm Front Brake Discs (left and right)
- 1 x Set of Brembo Front Brake Pads
- 2 x Brake Pad Wear Warning Wires
Combining OE-quality SHW brake discs with Brembo's premium friction material, this package delivers exceptional stopping power, consistent pedal feel and outstanding thermal stability. By replacing the discs, brake pads and wear sensors together, you ensure every braking component works as intended, providing maximum safety, performance and service life.
Ideal for routine servicing or replacing worn braking components, this package offers excellent value while maintaining the braking characteristics expected from the Porsche 992 GTS.
What Do Brake Discs, Pads & Warning Wires Do?
The front braking system works as a complete assembly to
safely slow and stop your Porsche.
- Brake
discs provide the friction surface against which the brake pads
operate.
- Brake
pads clamp onto the discs, converting vehicle speed into heat through
friction.
- Brake wear warning wires monitor pad thickness and illuminate the dashboard warning when replacement is required.
Together, these components deliver precise braking performance, consistent pedal feel and the stopping power expected from a high-performance Porsche.
Why Do They Wear Out?
Brake components are designed to wear as part of normal operation.
Common causes include:
- Frequent heavy braking
- Spirited road driving
- Track use
- High operating temperatures
- Stop-start traffic
- Natural friction material wear
As the pads wear, they gradually wear the brake disc surface. Replacing only one component can accelerate wear of the other, making a complete brake service the preferred solution.
Why Replace Them as a Complete Kit?
Replacing discs, pads and warning wires together provides
several important benefits:
- Ensures new pads bed correctly onto fresh disc surfaces
- Delivers optimum braking performance
- Prevents uneven brake wear
- Eliminates brake judder caused by worn discs
- Replaces worn brake wear sensors at the same time
- Reduces future labour costs
- Restores factory braking feel and performance
A complete brake overhaul is the best way to maintain safe, predictable braking while maximising the lifespan of every component.
When Should This Kit Be Replaced?
Replacement is recommended when:
- Brake pads reach their minimum thickness
- The brake wear warning light illuminates
- Brake discs are below the minimum thickness specification
- Disc surfaces become heavily scored or heat cracked
- Brake vibration or judder develops
- Braking performance begins to decline
- Scheduled maintenance recommends replacement
Replacing all front braking components together helps ensure the braking system performs exactly as Porsche intended.
Porsche 992 GTS Brake Service Kits
Keeping your Porsche's braking system in peak condition is essential for both performance and safety. Replacing brake discs and pads together ensures the friction surfaces wear evenly, improves pedal feel and restores the stopping power expected from the 992 GTS.
SHW brake discs are renowned for their precision engineering, excellent heat management and OE-quality manufacturing, while Brembo brake pads deliver consistent friction characteristics and exceptional braking confidence. Combined with new brake wear sensors, this complete package provides everything needed for a professional front brake service.
Whether your Porsche is used for daily driving, spirited weekend runs or fast road touring, replacing the braking system as a complete package ensures maximum reliability and long-term value.
Benefits of This Brake Package
- Complete front brake service solution
- Premium SHW brake discs
- High-performance
- Brembo brake pads
- New brake pad warning wires included
- Restores factory braking performance
- Improves pedal feel and braking consistency
- Reduces the risk of uneven brake wear
- Excellent value compared with purchasing components separately
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT992GTS.F.BRE
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Front Brake Pads
Maintain the exceptional braking performance of your Porsche
with the Brembo Front Brake Pads. These premium-quality pads are manufactured to the same
exacting standards that have made Brembo the world's leading name in
high-performance braking systems.
Fits:
- Porsche 992.1 Carrera GTS 3.0L 2019-24
- Porsche 992.1 Carrera GTS 3.0L 2019-24
- Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa GTS 3.0L 2020-24
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
Engineered to deliver outstanding stopping power, excellent pedal feel and consistent braking performance, Brembo brake pads are designed for fast road driving and spirited performance use. Manufactured using advanced friction materials, they provide excellent heat resistance while minimising brake fade, ensuring confidence under repeated heavy braking.
Whether you're replacing worn original pads or carrying out routine brake maintenance, Brembo brake pads deliver the quality, safety and performance expected from one of the world's most respected braking manufacturers.
What Do Front Brake Pads Do?
Brake pads create the friction required to slow and stop your Porsche by pressing against the brake discs when the brake pedal is applied.
Their primary functions include:
- Converting vehicle speed into heat through friction
- Delivering powerful, controlled braking
- Providing consistent pedal feel
- Maintaining safe stopping distances
- Supporting the vehicle's ABS, PSM and other braking systems
As one of the hardest-working components on the vehicle, brake pads are essential for safe, predictable braking performance.
Why Do Brake Pads Wear Out?
Brake pads are designed to wear gradually as part of normal operation.
Factors that accelerate wear include:
- Frequent heavy braking
- Spirited or track driving
- High vehicle speeds
- Heat build-up
- Stop-start traffic
- Worn brake discs
As the friction material becomes thinner, braking performance can gradually decline and stopping distances may increase.
When Should They Be Replaced?
Brake pads should be replaced when:
- The friction material reaches the minimum service thickness
- Brake wear warning indicators illuminate
- Braking performance begins to deteriorate
- Excessive squealing or grinding noises occur
- The pads become unevenly worn
- During brake disc replacement where recommended
Regular inspection helps ensure maximum braking efficiency while preventing unnecessary damage to the brake discs.
Key Features
- Excellent braking performance and pedal feel
- Advanced high-performance friction material
- Low brake fade under demanding conditions
- Precision manufactured for OE fitment
- Ideal for fast road and everyday performance driving
Brembo Porsche Brake Pads & Braking Components
Brembo is one of the world's most respected manufacturers of high-performance braking systems and supplies original equipment braking components for many of the world's leading performance car manufacturers, including Porsche. Their brake pads are engineered to deliver outstanding stopping power, excellent thermal stability and predictable braking performance under a wide range of driving conditions.
Whether replacing worn original pads or servicing your Porsche's braking system, Brembo brake pads provide the confidence, durability and quality expected from an OE manufacturer.
Benefits of Brembo Front Brake Pads
- Outstanding stopping performance
- Excellent pedal feel and modulation
- High resistance to brake fade
- Low noise and consistent braking
- Precision OE-quality fitment
- Manufactured by a leading OE braking specialist
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992698151SBRE
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8 2021-23
- Porsche 9J1.1 Taycan 2020-24
- Porsche 9J1.1 Taycan 4 Cross Turismo 2020-24
- Porsche 9J1.1 Taycan 4S 2020-24
- Porsche 9J1.1 Taycan 4S Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo 2020-24
- Porsche 9J1.1 Taycan Turbo Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo S 2020-24
- Porsche 9J1.1 Taycan Turbo S Cross Turismo 2020-24
This is a used part which has been fitted and used briefly then taken off the vehicle due to not meeting expectations of the customer. This part is in good working order. Ideal for restoration specialists, collectors, or workshops looking for components at reduced cost.
Condition:
This handbrake shoes (set of 4) is a briefly used part. It has some fitting imperfections but in good / reusable working order.
Please see the gallery of images before purchasing.
Fits:
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8 2021-23
- Porsche 9J1.1 Taycan 2020-24
- Porsche 9J1.1 Taycan 4 Cross Turismo 2020-24
- Porsche 9J1.1 Taycan 4S 2020-24
- Porsche 9J1.1 Taycan 4S Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo 2020-24
- Porsche 9J1.1 Taycan Turbo Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo S 2020-24
- Porsche 9J1.1 Taycan Turbo S Cross Turismo 2020-24
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB698533B
The product you are viewing cross references to these numbers
- Porsche 918 Spyder 4.6L 2014-15
Brembo Rear Brake Pads
These Brembo front brake pads are specifically engineered for the Porsche 918 Spyder, delivering the precision, durability and high-performance braking required for one of Porsche’s most advanced hybrid hypercars.

Fits:
- Porsche 918 Spyder 4.6L 2014-15
Manufactured to OE standards, these brake pads ensure optimal compatibility with the 918 Spyder’s advanced braking system, including its high-performance carbon ceramic setup.
What These Brake Pads Do
Brake pads generate the friction needed to slow and stop the vehicle by pressing against the brake discs. In a vehicle like the 918 Spyder, they must perform consistently under extreme speeds and temperatures.
They help:
• Deliver powerful and consistent stopping performance
• Maintain precise pedal feel and control
• Operate effectively under extreme heat conditions
• Support high-speed braking stability
• Work seamlessly with advanced braking systems
Why Brake Pads Wear Out
Brake pads are consumable components and will gradually wear with use.
Common causes include:
High-performance driving
Frequent heavy braking increases wear rates.
Extreme heat cycles
Repeated high-temperature operation degrades pad material.
Track or aggressive use
Places higher demands on braking components.
Normal driving wear
Daily use naturally reduces pad thickness over time.
Symptoms You May Need to Replace Brake Pads
• Reduced braking efficiency
• Squealing or grinding noises
• Increased stopping distances
• Brake wear warning indicators
• Inconsistent or reduced pedal feel
Timely replacement is essential to maintain both safety and performance.
Why Choose Brembo Brake Pads for the 918 Spyder
OE Manufacturer Quality
Brembo is a trusted supplier of high-performance braking systems used by
Porsche.
Designed for Extreme Performance
Engineered to meet the demands of the 918 Spyder’s hybrid hypercar platform.
Consistent Friction and Performance
Maintains reliable braking across a wide temperature range.
High Thermal Resistance
Resists brake fade during repeated high-speed braking.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91835294603BRE
The product you are viewing cross references to these numbers
- Porsche 918 Spyder 4.6L 2014-15
Brembo Front Brake Pad Set
These Brembo front brake pads are
designed specifically for the Porsche 918 Spyder, delivering the exceptional
braking performance required for one of Porsche’s most advanced hypercars.
Manufactured to OE standards, these pads ensure precise braking control,
durability and consistent performance under extreme conditions.
Fits:
- Porsche 918 Spyder 4.6L 2014-15
As a high-performance hybrid supercar, the Porsche 918 Spyder demands braking components capable of handling immense speeds and thermal loads. These Brembo pads are engineered to meet those demands while maintaining road usability.
What These Brake Pads Do
Brake pads create friction against the brake discs to slow and stop the vehicle. In a performance car like the 918 Spyder, they must operate reliably under very high temperatures and repeated heavy braking.
They help:
• Deliver strong and consistent braking performance
• Provide precise pedal feel and control
• Maintain performance under high heat conditions
• Work in harmony with advanced braking systems
• Ensure safe and predictable stopping power
Why Brake Pads Wear Out
Brake pads are consumable components and will naturally wear over time.
Common causes include:
High-performance driving
Frequent heavy braking accelerates wear.
Heat build-up
Extreme temperatures can degrade pad material.
Track or spirited use
Increases friction demand and wear rate.
Normal road use
Even standard driving gradually reduces pad thickness.
Symptoms You May Need to Replace Brake Pads
• Reduced braking performance
• Squealing or grinding noises
• Increased stopping distances
• Brake warning light or wear indicators
• Vibration or inconsistent braking feel
Replacing worn pads is essential to maintain safety and performance.
Why Choose Brembo Brake Pads for the 918 Spyder
OE Quality and Performance
Brembo is a leading manufacturer of high-performance braking systems, trusted
by Porsche.
Designed for High-Performance Applications
Engineered to handle the extreme demands of the 918 Spyder.
Consistent Friction Characteristics
Provides predictable braking response across a wide temperature range.
Durability Under Load
Built to resist fade and maintain performance during repeated braking.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91835194602BRE
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Width 193.6mm. Height 77.5mm. Thickness 17mm. Wear Warning Contact prepared for wear indicator

Porsche 718 (982) Boxster 2.0L / 2.5L 2017>> FRONT
For cars with steel brake conversion
Porsche 718 (982C) Cayman 2.0L / 2.5L 2017>> FRONT
For cars with steel brake conversion
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99135194802BRE
The product you are viewing cross references to these numbers
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19


I450 - For cars with Ceramic Brake PCCB
Porsche 991.2 Carrera 2017>>
Porsche 991.1 Turbo 2014-16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99135194603BRE
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
This Rear Brake Disc and Brake Pads Package provides a complete quality braking overhaul for the rear axle of Porsche Macan (95B) models. The kit includes high-performance rear brake discs, premium rear brake pads, and the required fitment components, ensuring a balanced, smooth, and reliable braking experience.
Fits:
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
Diagram Ref No 1, 8, 9
What This Product Does:
- Replace the rear brake discs/rotors, restoring a true, flat, even braking surface for the pads to clamp against.
- Replace the rear brake pads, which provide the friction material that presses onto the rotor to stop the vehicle.
- Potentially include wear sensors so the pad-wear monitoring system remains functional.
- Improve stopping performance, restore correct rear braking balance, reduce noise/vibration/pedal pulsation, and ensure rear brakes operate reliably under load and repeated stops.
Symptoms Of Wear Or Failure:
- Squealing or high-pitched noise when braking from the rear, especially under light braking (indicates worn pads or pad-to-rotor gap issues).
- Grinding or scraping noise from the rear wheels when braking (indicates extremely worn pads, possibly metal-on-metal contact or rotor damage).
- Brake pedal pulsation or vibration (especially if rotors are warped, uneven or heat-distressed).
- Longer stopping distances or rear braking weaker than front (which may cause imbalance or pulling to one side).
- Spongy or soft brake pedal feel when braking from higher speeds or repeated stops (heat soak or rotor/fade issues).
- Visible rotor damage or wear: grooves, cracks, blue-heat coloration, rotor thickness below spec, or excessive lip on edge of rotor face.
- Uneven pad wear on the rear axle or increased brake dust from the rear wheels.
- Car pulls or drifts during braking if one side’s rotor/pads are significantly worse than the other.
- Safety: Braking is a primary safety system. On a performance vehicle (especially) the rear brakes support stability, especially under heavy braking or dynamic driving. Worn rear brakes compromise stopping ability and can cause imbalance.
- Performance & Balance: Rear brake condition contributes to overall braking balance. Matching new rotor and pad ensures rear braking capability complements the front, delivering consistent pedal feel and stopping power.
- Preventing Further Damage: Worn pads can damage rotors (scoring, heat stress). Warped or damaged rotors will in turn degrade new pads quickly. Replacing both pads & discs together prevents this cascade of wear.
- Quiet & Smooth Operation: A fresh kit removes squealing, vibration, or pedal judder caused by degraded surfaces or mismatched wear.
- Cost-effectiveness: Since access to rear brakes still involves labour (wheel removal, caliper removal, rotor removal), doing a full kit at once avoids repeated disassembly and costs.
- Resale & Reliability: For premium brands like Porsche, maintaining braking hardware in top condition supports vehicle value, owner satisfaction, and reduces risk of warranty/inspection issues.
- Heat & Fade Resistance: Especially for driven/sporadic high-performance use, rear rotors and pads see significant thermal loads. Quality components keep braking reliable even under demanding conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT95BT.R356.BRE
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 971.1 Panamera V6 3.0L 2WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S Diesel V8 4.0L 4WD (422 Hp) 2017-18
- Porsche 971.1 Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo 2017-18
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD (550 Hp) 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8 2021-23

For cars WITHOUT Ceramic Brake PCCB with Option Codes
2EG 20" rear disc brake, Red, Short wheel base
2EM 20" rear disc brake, Red, Long wheel base
1KC 20" rear disc brake, Red, Long wheel base USA
1KG 20" rear disc brake, Red, Long wheel base USA
- Porsche 971.1 Panamera V6 3.0L 2WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S Diesel V8 4.0L 4WD (422 Hp) 2017-18
- Porsche 971.1 Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo 2017-18
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD (550 Hp) 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8 2021-23
Thickness 18mm
Height 87mm
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99135294701BRE
The product you are viewing cross references to these numbers
- Porsche 971.1 Panamera V6 3.0L 2WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S Diesel V8 4.0L 4WD (422 Hp) 2017-18
- Porsche 971.1 Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo 2017-18
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD (550 Hp) 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive 2017-20
- Porsche 971.2 Panamera 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
Fits Left or Right Side, Price is each.
Disc diameter: 330 mm
Brake Disc Thickness: 28 mm

Porsche 971.1 Panamera 2017-21 - REAR
(IKZ) For cars with 18-inch brake disc, brake caliper painted Black,
(I1KF) For cars with 18-inch brake disc, brake caliper painted Black, (NAR)
Porsche 971.2 Panamera 2021>> - REAR
(A8C) - "Standard" equipment
(0J2) - Load group 1 FA/1 RA
(2EB) - Rear disc brake, Standard
(2ET) - Rear disc brakes - disc diameter 18-inches, brake calliper painted Black
(2EW) - Rear disc brake, standard, red brake caliper (NAR)
(2EY) - Rear disc brake, standard, black brake caliper (NAR)
The Brembo brake disc with special UV paint treatment guarantees superior corrosion resistance for the product, thanks to the protective coating on the outer edges and on the disc hub. The UV paint not only gives the disc a clean, shiny appearance but is also beneficial for the environment as the water-based UV paint treatment does not require the use of chemical solvents and is a low energy consumption process.
• OE-equivalent
• Brembo quality
• ECE-R90 certificate Safety
• High carbon
• Anti-corrosion
• PVT ventilation
• Fastening screws
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97161560XFBRE
The product you are viewing cross references to these numbers
- Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
- Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23
- Porsche 9YA Cayenne Turbo S E-Hybrid V8 4.0L (550Hp) 2019-23
- Porsche 9YA Cayenne Coupe Turbo S E-Hybrid V8 4.0L (550Hp) 2020-23
Fits Left or Right. Sold each.
Fits:
Porsche 9YA Cayenne 2018>>
For cars with Rear brake discs 18", brake caliper painted Black (option code: 1KV)
Porsche 9YA Cayenne E-Hybrid 2018>>
For cars with Rear brake discs 18", brake caliper painted Green (option code: 1KR)
Brake Disc Ø: 330 mm
Note: Brake disc rotors are priced each.
The Brembo brake disc with special UV paint treatment guarantees superior corrosion resistance for the product, thanks to the protective coating on the outer edges and on the disc hub. The UV paint not only gives the disc a clean, shiny appearance but is also beneficial for the environment as the water-based UV paint treatment does not require the use of chemical solvents and is a low energy consumption process.
• OE-equivalent
• Brembo quality
• ECE-R90 certificate
• Safety
• High carbon
• Anti-corrosion
• Fastening screws
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9Y0615601BRE
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 - 1969 to 1983
Kit Includes
2 x Rear Brake Caliper with brake Pad Pins and Spring - OE Match
2 x Rear Brake Disc - Brembo
1 x Rear Brake Pads - Brembo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKECALKIT911.R.BRE
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 - 1969 to 1983
Kit Includes
2 x Rear Brake Caliper - OE Match
2 x Rear Brake Disc - Brembo
1 x Rear Brake Pads - Brembo
1 x Rear Brake Pad pin Kit - OE Match
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKECALKIT911.R.BRE
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
Front brake caliper. This brake caliper is sold on an exchange basis. A refundable surcharge will be added to your order. Once your old caliper is removed, returned to us, and confirmed to be suitable for rebuilding (as per the terms and conditions below), the surcharge will be refunded.

Porsche 924S 2.5L 1986-88
Porsche 944 2.5L 1984-88
Porsche 944 2.7L 1989
Porsche 944S 3.0L 1987-88
Diagram ref. 8.
Terms & Conditions - Exchange Purchase:
The surcharge for this product will be refunded only after your existing caliper has been:
1.) Removed from your vehicle
2.) Returned to us at your own expense
3.) Accepted by the manufacturer as suitable for reconditioning
Please note that the assessment and approval of the returned unit is solely at the discretion of the manufacturer.
Refund processing times typically range from 1 to 2 weeks after the unit is received. However, in some cases, it may take up to 8 weeks for the manufacturer to complete their evaluation and issue approval.
All exchange purchases and surcharge refunds are subject to our full Terms & Conditions, available on our website.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9443514
The product you are viewing cross references to these numbers