Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Porsche
Porsche for Porsche
Porsche genuine parts and lifestyle products for Porsche models from Design911
A Quick Look at Porsche
Porsche information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Porsche is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons people replace these parts include maintaining originality, keeping factory specification, and choosing the latest genuine revisions for peace of mind.
- Common real-world issues behind many Porsche repairs are age and mileage: oil leaks, cooling system fatigue, brake and suspension wear, corrosion and electrical faults from moisture or heat cycling.
- Before ordering, confirm part numbers against VIN or option/PR codes, especially for safety‑critical or complex components.
- When upgrading, decide whether you want pure originality or performance changes, as some aftermarket options may suit specific goals better than genuine.
- For bigger jobs, replace related seals, hardware and consumables at the same time to avoid repeat labour and compatibility issues.
- Where available, follow the manufacturer’s fitting and bedding‑in guidance to get the best performance and longevity.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include: Common symptoms include vibration under braking, increased stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
- Check whether the parts are OE-equivalent replacements or performance upgrades and match this to how the Porsche is used.
- Follow any recommended bedding-in procedure and consider replacing discs, pads, sensors and fitting hardware together where advised.
Clothing & Gifts — Porsche-themed clothing and gifts let owners and enthusiasts show their passion off the road, or make ideal presents for fans of the marque. Common symptoms include: Items may become worn, faded, damaged or go out of style, prompting replacement with newer designs.
- Review available size, colour and material details to help choose the right item and ensure it matches how it will be used.
- Check any care or washing guidance so garments and accessories keep their appearance for longer.
Lifestyle — To explore different Porsche-inspired lifestyle products or gift ideas. Common symptoms include: General wear from handling or display.
- Confirm whether items are official Porsche lifestyle products or from trusted partner brands where stated.
- Consider who the item is for and how it will be used day to day to select the most suitable style or product type.
Keyring — To choose a different design, material or model theme. Common symptoms include: Scratches, worn finishes or loose fittings.
- Keyrings make simple, practical Porsche-themed gifts and can be matched to specific models or heritage designs where available.
- If a keyring shows damage or looseness, replace it to avoid losing keys or further wear to finishes.
Size chart — The size chart acts as a practical reference tool for all apparel purchases. Common symptoms include:
Explore Porsche at Design911
View the current Porsche range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
The part number 91410317101 is an OE Genuine Porsche connecting rod bolt. This critical engine component is designed to secure the connecting rod to the crankshaft, ensuring reliable and high-performance engine operation. Twelve of these bolts are typically required for one full engine assembly.
12 per engine. Price is for each.
Fits:
Porsche 911TE (1972 - 1973)
Porsche 911TV (1972 - 1973)
Porsche 911TK (1973 - 1973)
Porsche 911S (1970 - 1973)
Porsche RS (1973 - 1973)
Porsche RSR 2.8L (1973 - 1973)
Porsche 911 2.7 (1974 - 1977)
Porsche 911 3.0L Carrera (1976 - 1977)
Porsche 911 SC 3.0L (1978 - 1983)
Porsche 911 Turbo 3.0 (1975 - 1977)
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91410317101
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
The Genuine Porsche flywheel-end pinion bearing 99911014601 is the exact factory-spec bearing used in 915 transmissions from 1972–1989. This bearing supports the pinion shaft at the flywheel end, keeping it perfectly aligned for factory-correct gear operation, quietness, and longevity. It ensures the 915 gearbox shifts smoothly and prevents premature wear of gears and synchronisers.
Fits:
Porsche 911 1974 - 1989 (915 Gearbox)
Diagram Ref no 28.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99911014601
The product you are viewing cross references to these numbers
- Porsche 9J1.1 Taycan 2020-24
- Porsche 9J1.1 Taycan Sport Turismo 2020-24
- Porsche 9J1.1 Taycan 4 Cross Turismo 2020-24
- Porsche 9J1.1 Taycan 4S 2020-24
- Porsche 9J1.1 Taycan 4S Cross Turismo 2020-24
- Porsche 9J1.1 Taycan 4S Sport Turismo 2020-24
- Porsche 9J1.1 Taycan GTS 2020-24
- Porsche 9J1.1 Taycan GTS Sport Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo 2020-24
- Porsche 9J1.1 Taycan Turbo Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo Sport Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo S 2020-24
- Porsche 9J1.1 Taycan Turbo S Cross Turismo 2020-24
- Porsche 9J1.1 Taycan Turbo S Sport Turismo 2020-24
This genuine coolant expansion tank is the original-spec reservoir that forms part of the Taycan’s coolant system, responsible for managing coolant volume and pressure as the system heats and cools. Manufactured by Porsche to strict OEM standards.
Fits:
Porsche 9J1.1 Taycan 2020 - 2024
Diagram ref no 1
The coolant expansion/overflow reservoir for the Taycan’s coolant system. It collects and stores excess coolant from the closed-loop cooling circuit when temperature changes cause expansion. It also provides a visible coolant level reference and a refill point when topping-up is required.
This coolant tank:
• Accepts excess coolant as it expands under heat, preventing over-pressure in the cooling system.
• Allows coolant to return to the system when temperatures drop, helping maintain proper coolant volume and pressure.
• Provides a clean, secure housing that resists heat, pressure, and coolant chemistry - preventing leaks and degradation.
• Maintains correct coolant level and system integrity, vital for thermal management of batteries, motors, and inverter cooling.
When to replace. You should consider replacing the coolant expansion tank if:
• The original shows cracks, discoloration, deformation, or leaks.
• Coolant level drops unexpectedly without visible external leak - indicating internal crack or cap failure.
• The tank becomes brittle, warped, or chemically aged due to coolant exposure and heat cycles.
• You are restoring or servicing the cooling system, or performing maintenance/replacement of hoses, pumps or thermal components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9J1121407A
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
A front wheel bearing thrust washer that sits between the outer wheel bearing and the spindle nut on the front hub assembly. It provides a controlled friction surface and distributes load when adjusting bearing preload.
Sold each - 2 required per car
Fits:
Porsche 911 1963 - 1973
Porsche 912 1965 - 1970
Porsche 914/6 2.0 1970 - 1973
Diagram ref no 35
This thrust washer:
• Ensures proper wheel bearing preload by providing the correct support surface.
• Distributes torque evenly when adjusting the bearing retaining nut.
• Helps maintain smooth hub rotation and reduces bearing wear.
• Preserves correct wheel alignment and prevents unwanted play in the front hub.
A worn thrust washer can no longer hold the correct bearing preload, which can lead to wheel play, noise, or premature bearing wear. Grooves, distortion, or surface damage also affect how evenly the bearing nut tightens, reducing hub stability. Replacing the washer ensures proper bearing adjustment, smooth rotation, and safe, reliable front-wheel performance.
Replace this washer if:
• You are installing new front wheel bearings
• The existing washer shows scoring, grooves, or wear marks
• The front wheel exhibits play or noise
• You are doing a front hub rebuild or restoration
• Any deformation is visible on the washer face
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134166301
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
The 982413031G suspension strut is the original equipment front damper for Porsche Boxster / Cayman 982 (718) models equipped with the M030 Sport Suspension. It forms part of the car’s front suspension, controlling damping and rebound to ensure consistent handling, comfort, and stability under normal driving and sporty conditions.
Sold individually, two required for a full front set.
Fits:
For cars with Sport Suspension (option code: M030)
Porsche 982 Boxster (718) 2017>>
Porsche 982C Cayman (718C) 2017>>
This strut absorbs and dampens road shocks, bumps and irregularities to deliver a controlled, stable ride. It manages both compression and rebound forces, ensuring the suspension remains responsive yet composed. Under cornering, braking, or acceleration, it helps keep the wheels planted, maintains handling precision, and supports the dynamic behaviour intended for the Sport Suspension setup. By replacing worn or fatigued dampers with a new genuine unit, you restore front-end stability, ride comfort, and the sharp, predictable steering response characteristic of a properly set-up 982 with M030.
Using a genuine Porsche strut ensures that damping and suspension geometry remain as the manufacturer intended - critical for the M030 Sport Suspension, which is engineered to deliver a sharply balanced, sporty ride and handling. A factory strut maintains ride comfort, handling precision, and long-term reliability.
You should consider replacing the strut if:
• The old strut shows leaking fluid, reduced damping, or visible wear.
• The car exhibits poor handling, harsh ride, nose-dive under braking, or instability over bumps.
• You’re performing suspension maintenance or upgrades, or wish to restore OEM-spec ride and handling.
• You want to maintain original handling dynamics and resale value by keeping genuine Porsche components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982413031G
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Boxster Spyder / Sypder RS 718 4.0L 01/2019>>
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp) 01/2020>>
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Speedster 4.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
- Porsche 992.1 GT3 RS 4.0L 2022-24
- Porsche 992.1 (911) Sport Classic 3.8L 2023
- Porsche 992.1 (911) Dakar 3.0L 2023-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
- Porsche 992.2 Turbo 3.6L 2024>>
- Porsche 992.2 GT3 2025>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
The Porsche 99908444501 Control Arm Lock Nut is a genuine OEM fastener designed to secure critical suspension components such as the control arm, track arm or lateral arm. As a self-locking hex nut, it provides a reliable connection that maintains proper suspension geometry under load.
Sold each, 2 required per vehicle.
Fits:
Porsche 997.1 2005 - 2008
Porsche 997.2 2009 - 2012
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019
Porsche 992.1 2020 - 2024
Porsche 992.2 2024>>
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012
Porsche 981 Boxster 2012 - 2016
Porsche 718 Boxster 2017 >>
Porsche 987C.1 Cayman 2006 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Porsche 981C Cayman 2014 - 2016
Porsche 718C Cayman 2017>>
Diagram ref no 5
• Position / Application: Front and/or rear suspension (varies by model); Control arm, lateral arm, track arm, subframe and suspension mount connections • • Function: Provides secure locking force on suspension bolts; maintains suspension geometry and prevents loosening
• Quantity Per Vehicle: Depends on model; commonly 2–4 per front suspension assembly.
This nut is widely used across Porsche models including the 911, Boxster and Cayman, making it one of the most common suspension service hardware items. Because suspension fasteners experience high stress, vibration, and environmental exposure, its recommends replacing self-locking nuts whenever removed. Fresh OEM hardware ensures the correct clamping force, prevents unwanted movement and helps protect expensive suspension components from premature wear.
Whether you’re replacing a control arm, performing an alignment-critical repair, or completing a suspension rebuild, the 99908444501 nut guarantees factory-correct fit, strength and long-term reliability. Using genuine Porsche hardware ensures your suspension performs exactly as engineered - especially important for performance-driven Porsche models.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99908444501
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Boxster Spyder / Sypder RS 718 4.0L 01/2019>>
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp) 01/2020>>
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Speedster 4.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
- Porsche 992.1 GT3 RS 4.0L 2022-24
- Porsche 992.1 (911) Sport Classic 3.8L 2023
- Porsche 992.1 (911) Dakar 3.0L 2023-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
- Porsche 992.2 Turbo 3.6L 2024>>
- Porsche 992.2 GT3 2025>>
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
The bolt secures the control arm / lateral-arm / track-bar assembly to the chassis or sub-frame - a critical connection in the vehicle’s suspension system.
Sold each, 2 required per vehicle.
Fits:
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019
Porsche 992.1 2020 - 2024
Porsche 992.2 2024>>
Porsche 981 Boxster 2012 - 2016
Porsche 718 Boxster 2017 >>
Porsche 981C Cayman 2014 - 2016
Porsche 718C Cayman 2017>>
Diagram ref no 11
• Function: Secures suspension arms to chassis/subframe; maintains suspension geometry under load.
• Position / Application: Front or rear suspension (model-dependent); Control arm / lateral arm / track bar mounting
• Superseded Part Number: 99907286201, 99907289201.
• Quantity per Vehicle: Depends on model; commonly 2–4 per front suspension assembly
Over time, suspension bolts are exposed to significant stress, vibration, corrosion, and environmental factors. During any suspension service or component replacement, it's recommended to replace these critical fasteners to ensure proper clamping force and structural integrity. Using an original bolt ensures correct thread pitch, accurate dimensions, and manufacturer-approved material strength - critical for high-precision vehicles.
This bolt is used in many Porsche models, including the 911, 718 Boxster, and 718 Cayman, depending on the suspension configuration. Whether you're performing routine maintenance, replacing a control arm, or performing a steering repair, which is crucial for maintaining wheel alignment, installing the correct bolt helps maintain your vehicle's handling, safety, and long-term reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAF008970
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Boxster Spyder / Sypder RS 718 4.0L 01/2019>>
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp) 01/2020>>
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Speedster 4.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
- Porsche 992.1 GT3 RS 4.0L 2022-24
- Porsche 992.1 (911) Sport Classic 3.8L 2023
- Porsche 992.1 (911) Dakar 3.0L 2023-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
- Porsche 992.2 Turbo 3.6L 2024>>
- Porsche 992.2 GT3 2025>>
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
This bolt (together with the correct washer / nut) ensures that the suspension arms remain securely fixed, holding suspension geometry correctly under load. This is crucial for steering, handling, ride comfort and safety.
Sold each, 2 required per vehicle.
Fits:
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019
Porsche 992.1 2020 - 2024
Porsche 992.2 2024>>
Porsche 981 Boxster 2012 - 2016
Porsche 718 Boxster 2017 >>
Porsche 981C Cayman 2014 - 2016
Porsche 718C Cayman 2017>>
Diagram ref no 7
• This genuine hex-head control-arm bolt (PAF008757 / 99907286401) is listed for use with front suspension / control-arm mounting on a variety of modern Porsche models.
• Position / Application: Front suspension; Suspension control arm / track arm mounting
• Superseded Part Number: 99907286401
• Quantity per Vehicle: Depends on model; commonly 2–4 per front suspension assembly
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAF008757
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
This lower control arm (sometimes called “rear lateral arm / suspension arm") is used for the rear suspension of Porsche 987 (Boxster / Cayman) models — covering both Gen1 and Gen2. The part is supplied as a single arm (left or right). For best results and balanced suspension behaviour, replacement of both rear arms (left + right) is recommended when bushings or joints show wear.
Sold each, Fits left and right side.
Fits:
Porsche 987.1 Boxster 2005 - 2008
Porsche 987.2 Boxster 2009 - 2012
Porsche 987C.1 Cayman 2005 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Diagram ref no 8
• Part Numbers / Cross-References: 98733104304 (current), 98733104302 / 98733104303 (previous numbers)
• Position: Rear lower control arm / lateral link - connects rear axle assembly to chassis/subframe, controlling wheel lateral and longitudinal position under dynamic loading.
• Functions: Maintains correct wheel alignment geometry under load, ensures stable rear-end handling, helps manage camber and toe changes, absorbs suspension loads, supports consistent tyre contact and handling predictability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98733104304
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
United Arabian Emirates (UAE) version

Modern, not classic:
This is the map software needed for your Porsche Classic Communication Management (PCCM) and Porsche Classic Communication Management Plus (PCCM Plus).
The navigation software is provided on a micro SD card.
For use on all vehicles with the PCCM or PCCM Plus;
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG642503B
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Speedster 4.0L 2019-24
This radiator cooling fan is a direct-fit replacement for the factory 400 W electric fan used on Porsche 992 (992.1 series) models. It helps regulate engine temperature by drawing airflow through the radiator during low-speed or high-load conditions.
Fits:
Porsche 992.1 Carrera 04.11.2019 - 2024
PLEASE NOTE: Radiator fan bracket has to be transferred over to new fan or sourced separately. Not included with this fan.
Porsche part number 992121435.
Diagram ref no 2
• Power: Rating 400 W
• 400 W OEM motor delivering Porsche-specified airflow
• Ensures correct cooling performance by drawing air through the radiator stack
• Direct factory fitment into the original carrier or shroud
• Quiet, smooth operation thanks to precision-balanced blades and high-quality bearings
• Fully compatible with the vehicle’s thermal and control modules
Genuine Porsche cooling fans operate in harsh environments, facing constant heat cycles, vibration and moisture. Over time, motor bearings, windings or blade balance can degrade, reducing airflow and compromising cooling efficiency. A weakened or failing fan can allow coolant temperatures to rise-especially noticeable in slow traffic, warm climates or during extended idling.
Replacing a failing unit with a new Genuine Porsche fan ensures the cooling system functions exactly as engineered, maintaining proper operating temperatures, protecting engine components, and preserving the vehicle’s performance and reliability.
When to Replace
• Increasing coolant temperatures at idle or low speeds
• Noisy fan operation (humming, grinding or vibration)
• Fan fails to activate under high-temperature conditions
• Cooling system fault messages or stored diagnostic codes
• During radiator or condenser replacement, or when damage to blades or wiring is present
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992959447H
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
The NOx Sensor is a genuine OEM-spec nitrogen oxide sensor designed to measure NOx levels in the exhaust system of modern Porsche vehicles. Mounted directly in the exhaust flow, this sensor provides the Engine Control Unit (ECU) with real-time nitrogen-oxide concentration data, allowing the emissions-control system to accurately regulate combustion and after-treatment.
Fits:
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2012-18
CVVA / CVVB / CVVC
Diagram Ref No 17
What This Product Does:
- Monitors NOₓ emissions — it continuously measures nitrogen-oxide levels in the exhaust gas and communicates that data to the vehicle’s control unit (ECU).
- Enables emissions control systems — in diesel engines (or gasoline engines with NOₓ after-treatment), the sensor provides feedback for systems such as Selective Catalytic Reduction (SCR) or Exhaust Gas Recirculation (EGR), to reduce NOₓ output before gas exits the tailpipe.
- Helps regulate combustion and fuel dosing — by providing real-time exhaust composition data, the ECU can adjust parameters such as fuel injection timing, air/fuel ratio or SCR dosing (e.g. AdBlue injection) to optimise performance and emissions compliance.
- Ensures emissions compliance — given tightening environmental laws and standards (e.g. Euro 6 in Europe), a functioning NOx sensor is essential to keep NOₓ emissions within legal limits.
- “Check Engine” or emissions-system warning light appears on the dashboard.
- Reduced engine performance or the vehicle entering “limp mode” — some ECUs restrict engine output when exhaust-sensor data is invalid.
- Increased fuel consumption or poor fuel economy — incorrect NOₓ data can lead the ECU to mismanage combustion parameters.
- Rough idle, hesitation or unstable engine behaviour, especially under acceleration or load — as exhaust-gas composition readings become unreliable.
- Failed emissions test or legal compliance check — the car may fail inspection if NOₓ emissions exceed permitted levels due to faulty sensing/control.
- R / AdBlue warnings (on diesel/SCR systems) — because the ECU can’t reliably monitor NOₓ output.
- Maintains emissions compliance — ensures that NOₓ output remains within legal limits under environmental regulations.
- Preserves engine performance & efficiency — accurate NOₓ feedback enables proper combustion control, fuel efficiency, and normal throttle response.
- Protects exhaust after-treatment hardware — catalytic converters, SCR catalysts, and associated systems depend on accurate NOₓ sensing; a faulty sensor can lead to improper dosing or damage.
- Avoids costly repairs or legal penalties — driving with a failed NOx sensor may lead to emissions-test failure or more extensive emissions-system damage.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB907807G
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
The NOx Sensor is a genuine emissions-control component designed to monitor nitrogen oxide (NOₓ) levels in the vehicle’s exhaust system. Installed within the exhaust stream, this sensor provides real-time data to the Engine Control Unit (ECU) to regulate combustion and after-treatment systems such as catalytic converters or SCR/AdBlue systems.
Fits:
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2012-18
CNRB
Diagram Ref No 17
What This Product Does:
- The NOx sensor continuously monitors levels of nitrogen oxides in your exhaust gases. This data is sent to the Engine Control Unit (ECU) or the vehicle’s emissions-control module.
- Based on NOx levels, the ECU (or emissions system) adjusts engine parameters (air-fuel ratio, exhaust after-treatment, DEF/AdBlue dosing in diesel/SCR systems, etc.) to ensure emissions stay within legal/environmental limits.
- Helps ensure compliance with environmental regulations and reduces harmful exhaust emissions — particularly NO and NO₂, which contribute to smog, acid rain, and health hazards.
- Supports proper functioning of components like catalytic converters or SCR (Selective Catalytic Reduction) systems by ensuring they receive accurate feedback for NOx removal.
Symptoms Of Failure:
- Engine warning light / emissions fault appears on the dashboard — the ECU detects abnormal or missing NOx sensor signals.
- Reduced engine performance or “limp mode” — the ECU may limit engine output, or injection logic may suffer, leading to poor acceleration or unstable performance.
- Increased fuel consumption or poor fuel economy — incorrect NOx data can cause the engine management system to mis-manage the air/fuel mixture.
- Rough idle, misfires, or jerky acceleration — combustion may become uneven if exhaust feedback is wrong, especially under load or varying throttle.
- Failed emissions or inspection test, or excessive exhaust pollution — without a working NOx sensor, the emissions-control system can’t properly regulate NOx output.
- Potential damage to exhaust-aftertreatment components (e.g. catalytic converter or SCR system) — inaccurate NOx readings can lead to improper dosing or treatment, shortening component life.
- Compliance with Emissions Regulations: For modern diesel (and many petrol) vehicles, a working NOx sensor is often required to meet compliance standards. Without it, you may fail emissions tests.
- Protects Engine Performance & Efficiency: A proper NOx sensor ensures the ECU has accurate exhaust feedback — leading to correct combustion, fuel economy, and stable power delivery.
- Prevents Further Damage: Faulty NOx readings can lead to improper exhaust after-treatment (e.g. over- or under-dosing AdBlue or mismanaging catalytic converter operation), which can damage costly components downstream.
- Environmental Responsibility: The sensor helps ensure harmful nitrogen oxides aren’t released in harmful quantities, reducing environmental harm and air-quality impact.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
958907807D
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Should be fitted with 93010505300 above.
The Genuine Porsche spacer sleeve is an original OEM component designed specifically for the timing chain tensioner assembly in Porsche 911 and 930 Turbo engines. It fits between the timing chain tensioner bracket and guide arm support, maintaining correct alignment and spacing in the factory timing drive geometry.
Fits:
Porsche 911 1968 - 1983
Porsche 930 Turbo
Diagram ref no 10A
• Position on Vehicle: Inside the front timing cover area – installed in the chain/guide/tensioner zone of the flat-six engine.
• Function: Ensures precise spacing in the timing chain tensioner assembly, guaranteeing correct chain tension, optimal performance and minimal noise.
• Specification: Manufactured by Porsche, dimensioned exactly to factory tolerance, with finish and fitment that matches original componentry.
While small in size, the spacer sleeve plays a crucial role in the timing drive system:
• A missing, worn or incorrect spacer can allow the tensioner or chain guide to offset, resulting in increased slack, audible chain noise, accelerated sprocket/rail wear, or worst-case timing failure.
• Incorrect spacing may alter chain path, affect sprocket alignment and shorten component life.
• During engine rebuilds or when the timing cover is removed, it's often overlooked - but renewing this part removes a weak link in the chain drive.
When and why to replace:
• The timing chain is noisy (chain slap) or exhibits excess play.
• Timing cover removed for service, tensioner replaced or guide rails changed.
• Spacer appears damaged, bent, missing or shows visible wear marks.
• You are performing a full timing system overhaul on your Porsche 911/930 and want all components at new-spec for reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93010551300
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Sold each, 2 required per engine
Fits:
Porsche 911 1982 - 1989
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998
Diagram ref no 40A
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99310516350
The product you are viewing cross references to these numbers
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
This genuine Porsche O-Ring & Clamp AD10 kit is a small but essential hydraulic sealing component used in various Porsche steering-assist and hydraulic line applications. Designed to maintain a leak-free, high-pressure connection, this kit is commonly used in models such as the Porsche 996 GT3 Cup and other Porsche vehicles equipped with similar hydraulic fittings.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 996 GT3 CUP
What This Product Does:
- The kit seals and secures a hydraulic connection — likely a hose or pipe attached to the power steering system or a steering‐related hydraulic line.
- The O-ring ensures a fluid‐tight seal preventing leaks of hydraulic fluid (such as power‐steering fluid) at the connection point.
- The clamp (or similar securing element) ensures the hose or fitting is mechanically retained, preventing movement, loosening or vibration under pressure.
- Essentially, it helps maintain hydraulic pressure, fluid integrity, and the overall reliability of the steering‐assist / hydraulic system.
Symptoms Of Failure:
- Power-steering fluid leak at the steering rack, pump, or hoses — especially around fitting points.
- Loss of steering assist (i.e., heavier steering input) because fluid is leaking or system pressure is reduced.
- Whining or groaning from the power-steering pump (air ingress due to low fluid) or bubbling sounds while turning.
- Visible damage to the clamp or fitting: missing clamp, loose hose, degraded or cracked O-ring seal.
- Steering feel deteriorates or becomes inconsistent — for example, steering effort increases when cold or after the car sits.
- In race/track applications (e.g., 996 GT3 Cup) a sudden steering assist drop mid‐session could be catastrophic.
Why Replacement Matters:
- Safety: Steering is a critical control system. A leak or failure in the power‐steering line can compromise control, especially under high loads or in a high‐performance car.
- Performance & Reliability: In Porsche performance or racing vehicles, maintaining full hydraulic integrity is essential. This small part helps ensure the system works as designed.
- Prevention: A failed O-ring or loose clamp may lead to a minor leak initially, but over time it can cause larger failures – pump wear, fluid starvation, overheating, or loss of assist. Replacing proactively avoids bigger repairs.
- Fit & Spec: Using the correct genuine Porsche part ensures proper size, material, and clamp strength — critical in high‐performance/hydraulic environments.
- Cost-Effectiveness: The kit is a low‐cost part compared to full hydraulic system repairs or steering rack replacement.
- Track/High-Load Use: Especially in dedicated race or performance cars (996 GT3 Cup, track‐modified vehicles) minor leaks or fitting failures can lead to major issues mid‐session.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99923054440
The product you are viewing cross references to these numbers