IPD
About IPD
Innovative Pro Design (IPD) was founded in 2004 by Mike "Turbo" Kirakosyan. The IPD Plenums were conceived, developed, tested, proven and manufactured in the heart of the Porsche Tuning capital, Southern California.
The IPD plenums evolved from the age old hot rod philosophy of "never leave good enough alone". The genius behind the IPD Intake Plenums is not only the patented "Y" design but also the geometry of diversion areas, optimization of bore sizes and internal surface area manipulation.
Vehicle Group
- Porsche 997 MKII Turbo 2010-13
Information
The revolutionary 997 Turbo IPD "Y" Pipe was built for the more demanding Turbo performance customer. This is not a cast reproduction of the factory Y pipe but a complete re-design from scratch, developed to deliver even greater air flow for both stock AND highly modified Turbos.
The factory Y pipe becomes restrictive when adding substantial power gains. The IPD "Y" Pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory Y pipe delivering the additional power needed to raise the performance bar on any Turbo.
Bigger isn't always better, and the IPD "Y" Pipe is designed to deliver optimum flow without being too large causing a loss in boost response. These "Y" Pipes can also be special ordered in custom powder coated colors and ceramic coatings or polished to improve the aesthetic appeal of your Turbo engine.
The IPD 997 Turbo Y Pipe is designed to be a direct replacement of the factory OEM Y Pipe. There are no modifications or fabrication required for installing the IPD Y Pipe. This is an easy and straight forward R & R (remove and reinstall) bolt on upgrade.
997.2 Turbo Hi-Flow Y Pipe: HP Gains 15-20. Direct Bolt-in Replacement / No modification necessary
Fits:
Porsche 997 Turbo MKII
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97501
The product you are viewing cross references to these numbers
The factory Y pipe becomes restrictive when adding substantial power gains. The IPD "Y" Pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory Y pipe delivering the additional power needed to raise the performance bar on any Turbo.
Bigger isn't always better, and the IPD "Y" Pipe is designed to deliver optimum flow without being too large causing a loss in boost response. These "Y" Pipes can also be special ordered in custom powder coated colors and ceramic coatings or polished to improve the aesthetic appeal of your Turbo engine.
The IPD 997 Turbo Y Pipe is designed to be a direct replacement of the factory OEM Y Pipe. There are no modifications or fabrication required for installing the IPD Y Pipe. This is an easy and straight forward R & R (remove and reinstall) bolt on upgrade.
997.2 Turbo Hi-Flow Y Pipe: HP Gains 15-20. Direct Bolt-in Replacement / No modification necessary
Fits:
Porsche 997 Turbo MKII
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97501
97501
99711064674
99711004672
The product you are viewing cross references to these numbers
Price: £830.00
In stock
Vehicle Group
- Porsche 997 MKII Turbo 2010-13
Information
The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.
This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software.
The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
Fits:
Porsche 997 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97274.2
The product you are viewing cross references to these numbers
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.
This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software.
The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
Fits:
Porsche 997 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97274.2
97274.2
9A111012074
The product you are viewing cross references to these numbers
Price: £830.00
In stock
Vehicle Group
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
Information
The brand new Porsche Panamera, named after the famed Carrera Panamericana race, marks Porsche's re-entry into the "four door saloon" front engine car market. The Panamera Turbo and Cayenne Turbo share many common components, including the intake that funnels into the manifold.
The IPD Panamera Turbo plenum has a revised diversion area and larger openings that further optimizes intake air speed and volume. This more efficient design provides the same great power increases as it does on the Cayenne Turbo, an additional 30+ horsepower and 32+ foot pounds of torque. The Panamera Turbo Plenum performance gains are throughout the entire power curve and provide additional power that can be felt in the "seat of your pants".
The factory plastic intakes are also prone to cracking, especially with Panamera Turbos producing higher boost levels. The IPD Plenum will not crack and will handle the highest of boost levels.
The IPD Plenum utilizes all the factory hardware including the OE 76mm throttle body. The only thing more impressive than the substantial power gains provided by the IPD Panamera Turbo plenum is how easy they install.
Fits:
Porsche 970 Panamera Turbo
Porsche 970 Panamera Turbo S
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
70276
The product you are viewing cross references to these numbers
The IPD Panamera Turbo plenum has a revised diversion area and larger openings that further optimizes intake air speed and volume. This more efficient design provides the same great power increases as it does on the Cayenne Turbo, an additional 30+ horsepower and 32+ foot pounds of torque. The Panamera Turbo Plenum performance gains are throughout the entire power curve and provide additional power that can be felt in the "seat of your pants".
The factory plastic intakes are also prone to cracking, especially with Panamera Turbos producing higher boost levels. The IPD Plenum will not crack and will handle the highest of boost levels.
The IPD Plenum utilizes all the factory hardware including the OE 76mm throttle body. The only thing more impressive than the substantial power gains provided by the IPD Panamera Turbo plenum is how easy they install.
Fits:
Porsche 970 Panamera Turbo
Porsche 970 Panamera Turbo S
PLEASE NOTE: The IPD Panamera Turbo plenum will NOT fit vehicles equipped with the factory Sound Imposer Package. This is easily identified by raising your hood and inspecting the front center of the engine compartment.
Compatible (Non-Sound Imposers) Factory Intake. Look for black plastic ribbed construction – Upgradeable with IPD Plenum
Incompatible (Sound Imposer Equipped) Factory Intake. Look for aluminum construction – Does NOT work with IPD Plenum
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
70276
70276
97011014071
97011015070
7PP145770
The product you are viewing cross references to these numbers
Price: £663.00
Orderable
Vehicle Group
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Information
The very successful Cayenne was Porsche's solution for driving enthusiast who needed to carry additional passengers and cargo but didn't want to sacrifice driving excitement.
The IPD plenums provide great bolt on power for all late model Porsche applications but they work exceptionally well with all Porsche Turbos models, and the Cayenne Turbo is no exception.
The IPD Cayenne Turbo plenum has a revised diversion area and larger inlet openings that further optimizes intake air speed and volume. This more efficient design provides substantial power increases of an additional 30+ horsepower and 32+ foot pounds of torque.
The Cayenne Turbo Plenum performance gains are throughout the entire power curve and provide additional power that can be felt in the "seat of your pants".
The factory plastic intakes are also prone to cracking, especially with Cayenne Turbos producing higher boost levels. The IPD Plenum will not crack and will handle the highest of boost levels.
The IPD Plenum utilizes all the factory hardware including the OE 76mm throttle body. The only thing more impressive than the substantial power gains provided by the IPD Cayenne Turbo plenum is how easy they install.
Fits:
Porsche 955 Cayenne Turbo 2002-06
Porsche 955 Cayenne Turbo S 2002-06
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
55276
The product you are viewing cross references to these numbers
The IPD plenums provide great bolt on power for all late model Porsche applications but they work exceptionally well with all Porsche Turbos models, and the Cayenne Turbo is no exception.
The IPD Cayenne Turbo plenum has a revised diversion area and larger inlet openings that further optimizes intake air speed and volume. This more efficient design provides substantial power increases of an additional 30+ horsepower and 32+ foot pounds of torque.
The Cayenne Turbo Plenum performance gains are throughout the entire power curve and provide additional power that can be felt in the "seat of your pants".
The factory plastic intakes are also prone to cracking, especially with Cayenne Turbos producing higher boost levels. The IPD Plenum will not crack and will handle the highest of boost levels.
The IPD Plenum utilizes all the factory hardware including the OE 76mm throttle body. The only thing more impressive than the substantial power gains provided by the IPD Cayenne Turbo plenum is how easy they install.
Fits:
Porsche 955 Cayenne Turbo 2002-06
Porsche 955 Cayenne Turbo S 2002-06
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
55276
55276
95511004650
The product you are viewing cross references to these numbers
Price: £663.00
In stock
Vehicle Group
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Information
Aluminum Intake Plenum
Fits:
Porsche 957 Cayenne Turbo S 2009
The new Cayenne Turbo S comes equipped with a larger 82mm throttle body. The IPD Plenum fits this larger throttle body and delivers an additional 30+ horsepower and 32+ foot pounds of torque providing your Cayenne Turbo S with an improved boost in engine power and driving performance.
The superior design of the IPD Cayenne Turbo S plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve. The Turbo S Plenum has been specially machined to accept the larger factory 82mm throttle body.
The 957 Turbo S utilizes the factory throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Fits:
Porsche 957 Cayenne Turbo S 2009
The new Cayenne Turbo S comes equipped with a larger 82mm throttle body. The IPD Plenum fits this larger throttle body and delivers an additional 30+ horsepower and 32+ foot pounds of torque providing your Cayenne Turbo S with an improved boost in engine power and driving performance.
The superior design of the IPD Cayenne Turbo S plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve. The Turbo S Plenum has been specially machined to accept the larger factory 82mm throttle body.
The 957 Turbo S utilizes the factory throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Price: £746.00
In stock
Vehicle Group
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Information
The second generation 957 Cayenne Turbo received multiple upgrades across the entire platform, including an increase of 50 horsepower. This already impressive power output can be further increase by simply bolting on the IPD Cayenne Turbo plenum.
The IPD Cayenne Plenum provides power by means of a superior design that increases air speed, boost response and performance. This is achieved with larger inlets and better diversion areas. The cast aluminum construction can also withstand higher pressures and heat levels. The factory plastic intake is very prone to cracking, especially with Cayenne Turbos producing higher boost levels.
The improved design of the IPD Cayenne Turbo Plenum installs easily and delivers additional horsepower that will make your Cayenne Turbo even more menacing.
The new Cayenne Turbo Plenum delivers up to 30 horsepower and 32 foot pounds of torque giving your Cayenne an improved boost in engine power and driving performance.
The superior design of the IPD Cayenne Turbo plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve.
The 957 Turbo utilizes the factory 76mm throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Fits:
Porsche 957 Cayenne Turbo 2007-10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
57276
The product you are viewing cross references to these numbers
The IPD Cayenne Plenum provides power by means of a superior design that increases air speed, boost response and performance. This is achieved with larger inlets and better diversion areas. The cast aluminum construction can also withstand higher pressures and heat levels. The factory plastic intake is very prone to cracking, especially with Cayenne Turbos producing higher boost levels.
The improved design of the IPD Cayenne Turbo Plenum installs easily and delivers additional horsepower that will make your Cayenne Turbo even more menacing.
The new Cayenne Turbo Plenum delivers up to 30 horsepower and 32 foot pounds of torque giving your Cayenne an improved boost in engine power and driving performance.
The superior design of the IPD Cayenne Turbo plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve.
The 957 Turbo utilizes the factory 76mm throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Fits:
Porsche 957 Cayenne Turbo 2007-10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
57276
57276
The product you are viewing cross references to these numbers
Price: £663.00
In stock
Vehicle Group
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Information
Requires upgrading factory 68mm Thottle Body with 74mm Thottle Body inc hose pipe
The 986 Boxster marked Porsche's return to a purpose built 2 seat roadster since the famed 550 Spyder. This liberating open cockpit platform was instrumental in saving Porsche from financial uncertainty and was Porsche highest volume seller from 1997 to 2003, until the Cayenne entered the Porsche line up.
The perfectly balanced mid engine 986 Boxster was designed to deliver driving excitement on sinuous back country roads while enabling the driver (and passenger) to literally take in the sights, sun and smells of the surrounding environment and listening to the intoxicating mechanical sounds of a flat 6 Boxer engine tones.
The Boxster experience can only be further heightened by adding improved performance. The IPD Plenums provide impressive the power gains throughout the entire power band making for an even more visceral Porsche driving experience.
All 986 Boxster IPD Plenum applications are designed to utilize the larger 74mm Porsche throttle body. The combination of the patented "Y" design of the IPD Plenum combined with a larger TB allow for improved air flow and intake air speed. The IPD Plenum is the absolute single best performance mod you can install on a Porsche Boxster, providing impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
Installation of the 986 Boxster IPD Plenums comes with additional hardware and is relatively straight forward although IPD strongly recommend installation be performed by a trained Porsche technician.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Plenum will provide the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster modification on the market and will further compliment other mods such as exhaust, software and beyond.
986 Boxster Competition 00-04 Plenum: TBA
Requires upgrading factory 68mm Thottle Body with 74mm Thottle Body
Fits:
Porsche 986 Boxster S 3.2L 2000-04
Porsche 986 Boxster 2.7L 2000-04
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
86174
The product you are viewing cross references to these numbers
The 986 Boxster marked Porsche's return to a purpose built 2 seat roadster since the famed 550 Spyder. This liberating open cockpit platform was instrumental in saving Porsche from financial uncertainty and was Porsche highest volume seller from 1997 to 2003, until the Cayenne entered the Porsche line up.
The perfectly balanced mid engine 986 Boxster was designed to deliver driving excitement on sinuous back country roads while enabling the driver (and passenger) to literally take in the sights, sun and smells of the surrounding environment and listening to the intoxicating mechanical sounds of a flat 6 Boxer engine tones.
The Boxster experience can only be further heightened by adding improved performance. The IPD Plenums provide impressive the power gains throughout the entire power band making for an even more visceral Porsche driving experience.
All 986 Boxster IPD Plenum applications are designed to utilize the larger 74mm Porsche throttle body. The combination of the patented "Y" design of the IPD Plenum combined with a larger TB allow for improved air flow and intake air speed. The IPD Plenum is the absolute single best performance mod you can install on a Porsche Boxster, providing impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
Installation of the 986 Boxster IPD Plenums comes with additional hardware and is relatively straight forward although IPD strongly recommend installation be performed by a trained Porsche technician.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Plenum will provide the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster modification on the market and will further compliment other mods such as exhaust, software and beyond.
986 Boxster Competition 00-04 Plenum: TBA
Requires upgrading factory 68mm Thottle Body with 74mm Thottle Body
Fits:
Porsche 986 Boxster S 3.2L 2000-04
Porsche 986 Boxster 2.7L 2000-04
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
86174
86174
The product you are viewing cross references to these numbers
Price: £663.00
In stock
Vehicle Group
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Information
Aluminum Intake Plenum 74mm
Fits:
Porsche 987 GEN1 Boxster S 3.2L 2005-06*
*Requires throttle body upgrade from 68mm to 74mm (part no 99760511501)
Download the detailed installation instructions.
The perfectly balanced mid engine platform of the 987 combined with a drop top convertible make for a truly liberating Porsche diving experience. The 987's were delivered slightly under powered from the factory so as not to rain on the Carrera's parade. The IPD Boxster intake plenum delivers increased performance that puts the Boxster in the ring with the famed Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and reduced intake air speed.
The Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Boxster enthusiasts. From mild to wild, it all depends on how fast you want the wind in your hair.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Boxster performance and heighten your Porsche driving experience.
Porsche introduced the 987 S Boxster with the 3.2 liter engine from the 986 Boxster S. This Plenum version provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174-3.2
The product you are viewing cross references to these numbers
Fits:
Porsche 987 GEN1 Boxster S 3.2L 2005-06*
*Requires throttle body upgrade from 68mm to 74mm (part no 99760511501)
Download the detailed installation instructions.
The perfectly balanced mid engine platform of the 987 combined with a drop top convertible make for a truly liberating Porsche diving experience. The 987's were delivered slightly under powered from the factory so as not to rain on the Carrera's parade. The IPD Boxster intake plenum delivers increased performance that puts the Boxster in the ring with the famed Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and reduced intake air speed.
The Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Boxster enthusiasts. From mild to wild, it all depends on how fast you want the wind in your hair.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Boxster performance and heighten your Porsche driving experience.
Porsche introduced the 987 S Boxster with the 3.2 liter engine from the 986 Boxster S. This Plenum version provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174-3.2
87174-3.2
98711005501
98711005502
The product you are viewing cross references to these numbers
Price: £709.00
In stock
Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Information
Aluminum Intake Plenum 74mm
Some early models up to 2006 have a 68mm throttle body so you might need to buy a 74mm throttle body part code 99760511502
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
Porsche 987 GEN1 Cayman 2.7L
Porsche 987 GEN1 Boxster 2.7L
Download the detailed installation instructions.
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman/Boxster IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The 74mm Cayman/Boxster S Plenum utilizes the factory 74mm throttle body. This version provides impressive power gains throughout the entire power band, especially in the midrange where it's most critical and most enjoyed.
The 74mm Cayman/Boxster S Plenum application is recommended for Cayman/Boxster S enthusiasts looking for considerable performance gains without pushing the performance envelope. Max horsepower is 14 and max torque is 12 which all comes in around 5600 RPM. Power gains are realized throughout the entire power band without any loses in power.
The IPD Cayman/Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Cayman/Boxster driving experience. The 74mm IPD Plenum is the best Cayman/Boxster modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174-2.7
The product you are viewing cross references to these numbers
Some early models up to 2006 have a 68mm throttle body so you might need to buy a 74mm throttle body part code 99760511502
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
Porsche 987 GEN1 Cayman 2.7L
Porsche 987 GEN1 Boxster 2.7L
Download the detailed installation instructions.
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman/Boxster IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The 74mm Cayman/Boxster S Plenum utilizes the factory 74mm throttle body. This version provides impressive power gains throughout the entire power band, especially in the midrange where it's most critical and most enjoyed.
The 74mm Cayman/Boxster S Plenum application is recommended for Cayman/Boxster S enthusiasts looking for considerable performance gains without pushing the performance envelope. Max horsepower is 14 and max torque is 12 which all comes in around 5600 RPM. Power gains are realized throughout the entire power band without any loses in power.
The IPD Cayman/Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Cayman/Boxster driving experience. The 74mm IPD Plenum is the best Cayman/Boxster modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174-2.7
87174
87174-2.7
87174-2.7-05
The product you are viewing cross references to these numbers
Price: £709.00
Arriving soon
Vehicle Group
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
Information
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
Download the detailed installation instructions.
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
Download the detailed installation instructions.
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Price: £746.00
In stock
Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Information
Porsche's new DFI (Direct Fuel Injection) intake is a totally and completely redesigned intake system developed to deliver improved performance, fuel consumption and emissions by optimizing the air fuel mixture directly inside the combustion chamber.
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and air velocity resulting in performance increases without any power loses.
The all new specifically designed IPD 3.4L DFI Cayman/Boxster Plenum is a direct bolt-on upgrade that replaces the factory plenum and utilizes all pre-existing factory hardware including the OE factory throttle body.
The improved IPD intake design allows for smoother, less turbulent and more efficient air flow with higher velocity air intake speed creating impressive power and torque gains.
The superior design of the DFI IPD Plenum provides an additional 12-14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline.
Power output in the lower rev range follows the Porsche factory output, with NO loses. Power and torque are realized in the midrange and continue to climb above factory power outputs all the way up to redline.
Installation of the new IPD 3.4L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
Porsche 987 GEN2 Cayman 2.9L DFI
Porsche 987 GEN2 Boxster 2.9L DFI
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and air velocity resulting in performance increases without any power loses.
The all new specifically designed IPD 3.4L DFI Cayman/Boxster Plenum is a direct bolt-on upgrade that replaces the factory plenum and utilizes all pre-existing factory hardware including the OE factory throttle body.
The improved IPD intake design allows for smoother, less turbulent and more efficient air flow with higher velocity air intake speed creating impressive power and torque gains.
The superior design of the DFI IPD Plenum provides an additional 12-14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline.
Power output in the lower rev range follows the Porsche factory output, with NO loses. Power and torque are realized in the midrange and continue to climb above factory power outputs all the way up to redline.
Installation of the new IPD 3.4L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
Porsche 987 GEN2 Cayman 2.9L DFI
Porsche 987 GEN2 Boxster 2.9L DFI
Price: £913.00
Orderable
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
Information
Aluminum Intake Plenum. Porsche 996 C2/4 3.4L 1998-99 IPD (FOR EARLY CABLE THROTTLE CARS)
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
Porsche introduced all 996 C2's with conventional cable throttles while all C4's were equipped with E-gas throttles. This was for the model year 98 in Europe and 99 in the US.
The IPD "Y" designed Cable plenum is a direct factory replacement of the OE "T" style air distributor. The IPD Plenum provides impressive max horsepower gains of 28 in the mid range and an additional 12 horsepower on top.
The IPD Plenum is the absolute single best modification that can be installed on these early under powered 996 Carreras and will transform your Porsche driving experience.
Installation is relatively easy and straight forward for mechanically inclined DIY customers although IPD strongly recommends having a qualified Porsche technician perform any IPD Plenum installation.
To confirm whether your Porsche is a Cable or E-gas throttle simply look at your throttle body for either a black electronic module (E-Gas) or a conventional spring / cable throttle control.
Fits:
Porsche 996 Carrera 2 3.4L 1998-99
Porsche 996 Carrera 4 3.4L 1998-99
(FOR EARLY CABLE THROTTLE CARS)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96074
The product you are viewing cross references to these numbers
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
Porsche introduced all 996 C2's with conventional cable throttles while all C4's were equipped with E-gas throttles. This was for the model year 98 in Europe and 99 in the US.
The IPD "Y" designed Cable plenum is a direct factory replacement of the OE "T" style air distributor. The IPD Plenum provides impressive max horsepower gains of 28 in the mid range and an additional 12 horsepower on top.
The IPD Plenum is the absolute single best modification that can be installed on these early under powered 996 Carreras and will transform your Porsche driving experience.
Installation is relatively easy and straight forward for mechanically inclined DIY customers although IPD strongly recommends having a qualified Porsche technician perform any IPD Plenum installation.
To confirm whether your Porsche is a Cable or E-gas throttle simply look at your throttle body for either a black electronic module (E-Gas) or a conventional spring / cable throttle control.
Fits:
Porsche 996 Carrera 2 3.4L 1998-99
Porsche 996 Carrera 4 3.4L 1998-99
(FOR EARLY CABLE THROTTLE CARS)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96074
99611021553
The product you are viewing cross references to these numbers
Price: £580.00
In stock
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Information
Aluminum Intake Plenum. Porsche 996 Carrera 3.4L / 3.6L IPD
Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Fits:
Porsche 997 GEN1 3.6L
Porsche 997 GEN1 3.8L S
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
Just like the Carrera S, it's difficult to find power for the naturally aspirated 3.4L Carrera, but the IPD Plenum does it better than any other after market mod available. This simple bolt on performance upgrade replaces the factory plastic air distributor with the IPD patented aluminum "Y" style Plenum.
The IPD Plenum delivers impressive horsepower gains of 25 and torque gains of 22 by means of a superior and more efficient design. These gains are mainly felt in the mid range where it is most needed and most enjoyed but performance improvements are realized throughout the entire rev range. Impressive Performance improvements like this will truly transform your Porsche driving experience.
These added power gains in the mid range create a more liner power curve helping to minimizing the dip in power typically experienced in the factory curve resulting in considerable performance improvements.
The 996 Plenum installation is a direct bolt on R & R (remove and reinstall) procedure. Installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97174
The product you are viewing cross references to these numbers
Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Fits:
Porsche 997 GEN1 3.6L
Porsche 997 GEN1 3.8L S
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
Just like the Carrera S, it's difficult to find power for the naturally aspirated 3.4L Carrera, but the IPD Plenum does it better than any other after market mod available. This simple bolt on performance upgrade replaces the factory plastic air distributor with the IPD patented aluminum "Y" style Plenum.
The IPD Plenum delivers impressive horsepower gains of 25 and torque gains of 22 by means of a superior and more efficient design. These gains are mainly felt in the mid range where it is most needed and most enjoyed but performance improvements are realized throughout the entire rev range. Impressive Performance improvements like this will truly transform your Porsche driving experience.
These added power gains in the mid range create a more liner power curve helping to minimizing the dip in power typically experienced in the factory curve resulting in considerable performance improvements.
The 996 Plenum installation is a direct bolt on R & R (remove and reinstall) procedure. Installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97174
97174
99711041603
99611011601
99611011600
The product you are viewing cross references to these numbers
Price: £663.00
In stock
Vehicle Group
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Information
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
The 996 3.6L X51 package was typically found on the "40th Anniversary" limited edition cars (MY 2004) but could also be special ordered by performance minded customers. The X51 engine package increased horsepower from the standard 316 up to 345.
The X51 Carrera's came equipped with a variety performance upgrades, both internally and externally, that made the cars very desirable for Porsche drivers looking for something closer to the GT3 experience.
The X51 engine package was blessed with many wonderful internal performance upgrades but Porsche still utilized the factory air distributor opening the door for the IPD Plenum to provide even more additional power.
The 996 X51 IPD Plenum is designed to use all the pre-existing factory hardware and OE 74mm throttle body. The revolutionary design of the IPD "Y" style Intake Plenum increase horsepower by 24 and torque by 22 (at the wheels).
The X51 Plenum is a direct bolt on replacement and installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.
Fits:
Porsche 996 X51 Upgrade cars 3.6L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96174-X
The product you are viewing cross references to these numbers
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
The 996 3.6L X51 package was typically found on the "40th Anniversary" limited edition cars (MY 2004) but could also be special ordered by performance minded customers. The X51 engine package increased horsepower from the standard 316 up to 345.
The X51 Carrera's came equipped with a variety performance upgrades, both internally and externally, that made the cars very desirable for Porsche drivers looking for something closer to the GT3 experience.
The X51 engine package was blessed with many wonderful internal performance upgrades but Porsche still utilized the factory air distributor opening the door for the IPD Plenum to provide even more additional power.
The 996 X51 IPD Plenum is designed to use all the pre-existing factory hardware and OE 74mm throttle body. The revolutionary design of the IPD "Y" style Intake Plenum increase horsepower by 24 and torque by 22 (at the wheels).
The X51 Plenum is a direct bolt on replacement and installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.
Fits:
Porsche 996 X51 Upgrade cars 3.6L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96174-X
96174-X
The product you are viewing cross references to these numbers
Price: £663.00
Orderable
Vehicle Group
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Information
Porsche's launch of the GT3 line marked the return of the purpose built street/track car designed to provide the ultimate Porsche driving experience. The hardcore track focus of the GT3 is reminiscent of the legendary RS line that helped make Porsche famous with driving enthusiasts around the world.
The GT3 Porsches have their own branch on the Porsche motorsport family tree. GT3 street cars aren't a distant cousin sharing the same family name but are an immediate family member sharing the same DNA with Porsche's top level and most successful race cars. The 996 GT3 is considered by many to be the most performance focused Porsche to ever come out of Stuttgart.
As with all GT3's, power improvements are very difficult to develop because of Porsche's fantastic out-of-the-box design and development on these performance minded machines.
The GT3 engine was specifically developed to deliver power where it's needed on the track, way up high in the rev range. The IPD Plenum compliments that power by delivering additional horsepower throughout the entire power band, especially in the mid range where it's most needed.
The 996 GT3 IPD Plenum provides an additional 24 horsepower at the wheels, enhancing the already ultimate Porsche driving experience. The 996 GT3 Plenum is specifically designed to accommodate the larger 997 GT3 82mm throttle body (additional purchase required).
The combination of the patented Y design plenum and larger throttle body make the 996 GT3 IPD Plenum the ultimate performance upgrade for the ultimate performance Porsche.
Installation of the 996 GT3 IPD Plenum is relatively straight forward but IPD strongly recommends installation be performed by a highly qualified Porsche technician.
996 GT3 Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 76mm Thottle Body with 997 GT3 82mm Thottle Body
Fits:
Porsche 996 GT3 2001 >>
**Not for early year cable driven throttle body cars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96382
The product you are viewing cross references to these numbers
The GT3 Porsches have their own branch on the Porsche motorsport family tree. GT3 street cars aren't a distant cousin sharing the same family name but are an immediate family member sharing the same DNA with Porsche's top level and most successful race cars. The 996 GT3 is considered by many to be the most performance focused Porsche to ever come out of Stuttgart.
As with all GT3's, power improvements are very difficult to develop because of Porsche's fantastic out-of-the-box design and development on these performance minded machines.
The GT3 engine was specifically developed to deliver power where it's needed on the track, way up high in the rev range. The IPD Plenum compliments that power by delivering additional horsepower throughout the entire power band, especially in the mid range where it's most needed.
The 996 GT3 IPD Plenum provides an additional 24 horsepower at the wheels, enhancing the already ultimate Porsche driving experience. The 996 GT3 Plenum is specifically designed to accommodate the larger 997 GT3 82mm throttle body (additional purchase required).
The combination of the patented Y design plenum and larger throttle body make the 996 GT3 IPD Plenum the ultimate performance upgrade for the ultimate performance Porsche.
Installation of the 996 GT3 IPD Plenum is relatively straight forward but IPD strongly recommends installation be performed by a highly qualified Porsche technician.
996 GT3 Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 76mm Thottle Body with 997 GT3 82mm Thottle Body
Fits:
Porsche 996 GT3 2001 >>
**Not for early year cable driven throttle body cars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96382
99611006593
94860511503
94860511504
99611011690
The product you are viewing cross references to these numbers
Price: £746.00
Orderable
Vehicle Group
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
Information
The all mighty 996 Turbo may be the perfect Porsche of them all to benefit from the IPD Plenum. Horsepower and torque gains are substantial and immediate (no adaptation required).
Horsepower improvements range from 30 to 35 and boost response improves considerably making for longer, stronger and of course more pleasurable power curves. The IPD plenum develops horsepower throughout the entire power band, especially where it's needed most, from mid range to top end.
Installation of the 996 Turbo Plenum is very challenging and installation should only be performed by a seasoned and qualified Porsche technician.
The 996 Turbo 74mm "Competition" Plenum is designed to function with more seriously modified Turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of Turbos ranging from mildly modified to 1000+ HP.
This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This "Competition Turbo" Plenum will help modified 996 Turbos realize maximum performance.
The increased air flow and air speed develop by the larger Plenum is designed to work with larger turbos, intercoolers, intake piping, high flow Y Pipes and more aggressive software.
Horsepower gains start around 35 hp and deliver max power slightly higher in the rev range creating better top end performance without the drop in power experienced with the factory air distributor.
996 Turbo Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 68 mm TB with 996 Turbo 74 mm Thottle Body
Fits:
Porsche 996 Turbo/S/X50/ GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96274
The product you are viewing cross references to these numbers
Horsepower improvements range from 30 to 35 and boost response improves considerably making for longer, stronger and of course more pleasurable power curves. The IPD plenum develops horsepower throughout the entire power band, especially where it's needed most, from mid range to top end.
Installation of the 996 Turbo Plenum is very challenging and installation should only be performed by a seasoned and qualified Porsche technician.
The 996 Turbo 74mm "Competition" Plenum is designed to function with more seriously modified Turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of Turbos ranging from mildly modified to 1000+ HP.
This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This "Competition Turbo" Plenum will help modified 996 Turbos realize maximum performance.
The increased air flow and air speed develop by the larger Plenum is designed to work with larger turbos, intercoolers, intake piping, high flow Y Pipes and more aggressive software.
Horsepower gains start around 35 hp and deliver max power slightly higher in the rev range creating better top end performance without the drop in power experienced with the factory air distributor.
996 Turbo Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 68 mm TB with 996 Turbo 74 mm Thottle Body
Fits:
Porsche 996 Turbo/S/X50/ GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96274
96274
The product you are viewing cross references to these numbers
Price: £730.00
In stock