OE Match
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.
OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 944 1989-91
Porsche 968 1992-95
Click 'Zoom in' for large parts diagram.
Diagram ref no 40
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94453726
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
The part reference 955 349 337 00 is a rubber mounting / support mount for the front-axle final drive / differential, isolating and supporting the front differential (front drive unit) relative to the chassis. There are 3 of the same on each car, Price is Each
Its purpose is to absorb and damp vibrations, reduce noise transmitted to the chassis, and accommodate slight relative motion between the drivetrain and the vehicle body
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10 (excluding Turbo)
Common failure modes / deterioration
Rubber degradation (cracking, hardening, tearing)
Over time, the rubber can become brittle, crack, or split from repeated stress cycles, heat, chemical exposure (oil, road salt, etc.). This reduces its damping ability.
Delamination / bond failure
The bonding between the rubber and the metal interfaces can fail, leading to slippage or separation under load.
Excessive deformation / sagging
As the rubber softens or wears, the mount may deform under load, causing misalignment or increased movement under torque.
Fatigue / wear from repeated cycles
Especially under harsh driving conditions (off-road, heavy loads, aggressive acceleration/shifting), the stress cycles on the mount accelerate wear. Some aftermarket writeups claim that the factory rubber design is prone to “premature Drive Shaft Support failure” because of constant stress on the rubber.
Heat / ozone / environmental damage
Exposure to high temperatures, undercarriage heat, moisture, road debris, and ozone accelerates rubber aging.
Load shift or impact damage
If the vehicle strikes a pothole or the differential experiences shock loads, the mount may crack or tear.
Click 'Zoom in' for large parts diagram.
Diagram ref no 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534933700
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Fits:
Porsche 986 Boxster (manual) - 1997 to 2004
Porsche 987 Boxster (manual) - 2005 to 2008
Porsche 987 Cayman (manual) - 2005 to 2008
Click 'Zoom in' for large parts diagram.
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610621211
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
This product supersedes Porsche's old part numbers:
- 986 561 479 01 (left) / 986 561 4780 01 (right)
Click 'Zoom in' for large parts diagram.
Diagram ref no 9.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9875614
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
Fits:
Porsche 911 1978-86
Porsche 911 Turbo 1975-88 3.0/3.3L
Porsche 944 1982-91 Automatic transmission cars
Porsche 924 / 924S 1976-88 Automatic transmission cars
Please click on 'Zoom in' to see diagram
(Ref No 27)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
311713269A
The product you are viewing cross references to these numbers
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
M573 Option - Cars with air conditioning
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95
Click picture for large parts diagram.
Diagram ref no 41.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94412602104
The product you are viewing cross references to these numbers
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Fits:
Porsche 928 1978-95
Click 'Zoom in' for large parts diagram.
Diagram ref no 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92833351302
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
This nut locks and retains key shock/strut assembly elements in the correct position. It helps prevent looseness, unwanted movement, or misalignment within the front suspension, supporting consistent handling and steering feel.
Sold each, 2 required per vehicle.
Fits:
Porsche 964 1989 - 1994 All models
Porsche 993 1994 - 1998 (not RS)
Diagram ref no 8
Front shock absorber adjusting nut manufactured to replicate the original Porsche part’s thread form, dimensions, and seating interface. Designed for direct installation with factory-style front suspension components on Porsche 964 and 993 models.
Installed on the front strut/shock assembly, the adjusting nut provides secure mechanical retention and precise positioning of the shock insert or related strut components. Its correct fit and thread engagement are essential for maintaining suspension integrity under repeated load cycles, bumps, and braking forces.
Adjusting nuts can round off, seize, corrode, or lose thread integrity over time - especially in vehicles exposed to moisture, road salt, or frequent suspension work. Replacing a worn or damaged nut helps ensure the shock/strut assembly remains correctly secured, preventing noise, play, and potential suspension failure.
When to replace:
• Nut is seized, heavily corroded, or damaged during removal
• Rounded flats / tool damage prevents correct torqueing
• Visible thread wear or cross-threading
• Suspension rebuild, shock/insert replacement, or strut refurbishment
• Front end clunks/rattles traced to strut hardware (after inspection)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96434350204
The product you are viewing cross references to these numbers
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- Porsche 95B.2 Macan Petrol 2.0L 245Bhp 2019-21
- Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
Fits:
Porsche 970 Panamera 3.0L 2014-2016
Porsche 95B Macan V6 Petrol 2014-2018
Porsche 95B.2 Macan 2019*
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7PP121237
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Fits:
Porsche 955 Cayenne 2003-06 (I1BK)
chassis 9P4LA 01526>> onwards
chassis 9P4LA 48416>> onwards
chassis 9P4LA 83740>> onwards
Porsche 957 Cayenne 2007-10 (I1BK)
* I1BK - Air suspension with levelling system and height adjustment (PASM)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534107
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Exhaust support bracket sound absorber. (SET OF 4) Porsche 996 / 997 99711122930
4 pcs required per exhaust box bracket (8pcs or 2 sets required per car)
Fits:
- Porsche 996 C2 / C4
- Porsche 997 C2 / C4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99711122930
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
4 pcs required per exhaust box bracket
Fits:
Porsche 996 C2 / C4
Porsche 997 C2 / C4
Click 'Zoom in' for large parts diagram.
Diagram Ref no 34
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99711122930
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 - 1978 to 1989
6 pin CDI Connector Housing for Porsche 911.
This is a high quality reproduction part made from PA12 Nylon which is tough, durable, heat and chemical resistant. It is also an excellent insulator.
Please Note
Pins & wiring not included, this is only the empty housing.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060270200
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 914 (1970-1976)
Fits:
Porsche 911 - 1965 to 1977
Porsche 914/6
3 pin CDI Connector Housing for Porsche 911.
This is a high quality reproduction part made from PA12 Nylon which is tough, durable, heat and chemical resistant. It is also an excellent insulator.
Please Note
Pins & wiring not included, this is only the empty housing.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90160270201
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
6 Pin Connector housing base
Forms part of 91161286801 or 91161286702
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161286702
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 911 / Carrera / turbo - 1970 to 1989
Porsche 964 Carrera / turbo / RS - 1990 to 1994
Porsche 924 S - 1986 to 1988
Porsche 928 S/ S4 / GTS - 1986 to 1995
Porsche 944/2 - 1986 to 1989
Porsche 968 - 1992 to 1994
6 Pin Connector Cap
Click 'Zoom in' for large parts diagram.
Diagram ref no 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161286801
The product you are viewing cross references to these numbers