OE Match
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.
OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Firs:
Porsche 356B T6 / 356C T6 (1.6-2.0) 08/1961-12/1965
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG55904106
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 944 2.5L 8V 1982-87
Fits:
Porsche 944 2.5ltr - 1982 to 1985 for cars with early dash
For LHD (Left Hand Drive) cars and RHD (Right Hand Drive)
- As original colored wiring.
- Complete harness including a 100% correct grommet with number 477971911
- Gasoline, oil, battery acid, engine coolant resistant.
- High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
- Handmade, concourse quality.
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94461201501
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Sold each - fits left or right
Fits:
Porsche 911 3.2 Carrera - 1986 to 1988
Handmade, concourse quality.
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161226400
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
Break out test harness for 964 engine
Fits:
Porsche 964 - 1989 t 1994
14 x test lead for:
1. Starter signal
2. Speed sender (only type 01 harness)
3. Resistor blower
4. Oil press
5. Back up light supply
6. Back up light from switch
7. NTC Blower
8. NTC Blower
9. Oil press (warning)
10. #30
11. Charge light / excitation
12. #30
13. Engine fan
14. Ground
Using our breakout harness you can easily take measurements and locate any faults.
All wires are marked indicating the specific function of each wire.
You remove the original connector and place our breakout harness back in between so that the entire electrical installation remains operational.
Comes with a detailed drawing showing function of each wire.
- As original colored wiring.
- Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
- Gasoline, oil, battery acid, engine coolant resistant.
- High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
964607017
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
Break out harness for 964 engine injector signals
Fits:
Porsche 964 - 1989 t 1994
10 x test lead for:
1. Ground
2. Injector cylinder 5
3. Injector cylinder 6
4. Injector cylinder 3
5. Injector cylinder 1
6. Injector cylinder 4
7. Injector cylinder 2
8. Common Injectors
9. Ground
10. Oil temp.
A valuable tool in every Porsche workshop.
Using our breakout harness you can easily take measurements and locate any faults.
All wires are marked indicating the specific function of each wire.
You remove the original connector and place our breakout harness back in between so that the entire electrical installation remains operational.
Comes with a detailed drawing showing function of each wire.
- As original colored wiring.
- Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
- Gasoline, oil, battery acid, engine coolant resistant.
- High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
964607016
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Replica Tan leather hood / bonnet straps for all Porsche 356 models. It delivers a secure fit while restoring the authentic, period-correct look of the bonnet.
Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965
This kit secures the bonnet using durable leather straps and proper mounting hardware, ensuring both function and reliability. At the same time, it preserves the vintage authenticity and finishing details that are essential for restorations and show-quality Porsche 356 models.
• Mounted across the front bonnet of Porsche 356, 356A, 356B, 356C models (approx. 1950s–1960s)
• The straps run over the bonnet and fasten to chassis or body anchors under the front hood edge, holding the bonnet closed
Why replacement matters:
• Original leather straps often deteriorate over time (crack, stretch, break), compromising the security and aesthetics of the bonnet
• A faithful OE-Match replacement ensures correct dimensions, leather quality, and mounting hardware so the strap fits securely and looks authentic
• Restoring the strap helps maintain original appearance, adds structural safety (prevents bonnet flutter or opening), and preserves the value and integrity of the classic build
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
64451108010
The product you are viewing cross references to these numbers
- Porsche 928S2 4.7L 1984-86
Fits:
Porsche 928 S2 - 1984 to 1986
Kit contains
2 x Distributor cap
2 x Rotor arm
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94460225100KIT1
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
Fits:
Porsche 924S - 1986 to 1988
Porsche 944 2.5ltr 8 valve - 1982 to 1987
Porsche 944 2.7ltr 8 valve - 1988 to 1989
Porsche 944 turbo - 1985 to 1991
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94460225100
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
TIP! If you detect a chain clap or rattling noise in the engine, your timing chain may be worn or stretched and needs replacing. each car has two
Fits:
Porsche 911 1965-89
Porsche 964 1991-93
Porsche 993 1994-97
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99310552900
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
Fits:
Porsche 981 Boxster 2012>>
Porsche 981C Cayman 2014>>
Porsche 991 Carrera 2012>>
Porsche 991 Turbo 2014>>
Porsche 991 GT3 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99734713100
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
Fits:
Porsche 981 Boxster 2012>>
Porsche 981C Cayman 2014>>
Porsche 991 Carrera 2012>>
Porsche 991 Turbo 2014>>
Porsche 991 GT3 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99734713100
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
Fits:
Porsche 924 - 1977 - 1985
A distributor cap is a crucial component of an ignition system in vehicles with internal combustion engines that use a distributor to control the timing of the spark. The distributor cap sits atop the distributor and houses the contact points for the ignition system's spark plug wires.
The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the center terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.
The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKIT924
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Kit includes - 6 x rubber mounting
Fits:
Porsche 912 - 1966 to 1969
The rubber-metal mounts are the same for the engine and gearbox. Four are used for the engine and two for the gearbox mount.
Diagram Ref No 2 and 34
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90230549201
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Kit contains oil slash tube x 2
Fits:
Porsche 911 1974-89
Porsche 930 1975-89
Porsche 964 1989-94
Click 'Zoom in' for large parts diagram.
Diagram ref no 21
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93010536202
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 SC - 1978 to 1983
Porsche 911 3.2 Carrera - 1984 to 1989
Oil lines are often overlooked components, yet their failure can lead to significant damage. These lines connect the engine, oil cooler, or timing chain tensioner, functioning reliably for years without drawing attention.
However, if a crack or break develops, substantial amounts of oil may leak—potentially draining the entire oil tank—leaving critical components without proper lubrication. To prevent such failures, it is advisable to replace aging oil hoses or lines at the first signs of wear.
In the context of full restorations, replacing all oil lines or hoses is a common and prudent practice to ensure long-term reliability.
Diagram Ref No 11A and 12A
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILCOOLERKIT04
The product you are viewing cross references to these numbers
This kit is comprised of the following items:
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 3.2 Carrera - 1984 to 1989
Oil lines are often overlooked components, yet their failure can lead to significant damage. These lines connect the engine, oil cooler, or timing chain tensioner, functioning reliably for years without drawing attention.
However, if a crack or break develops, substantial amounts of oil may leak—potentially draining the entire oil tank—leaving critical components without proper lubrication. To prevent such failures, it is advisable to replace aging oil hoses or lines at the first signs of wear.
In the context of full restorations, replacing all oil lines or hoses is a common and prudent practice to ensure long-term reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILPIPEKIT04
The product you are viewing cross references to these numbers
This kit is comprised of the following items: