iCarsoft VAWS V2.0 is a Professional and powerful vehicle fault diagnosis tool for VW/Audi/Skoda/Seat developed by iCarsoft Technology Inc.
With a 4.0" TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc.
It enables technicians to accurately diagnose complex problems.
Product Features
1.iCarsoft VAWS V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
2.Support OBDII/EOBD Ten Modes of Operation
3.Read Live Data
4.Full ECU Diagnosis
5.Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6.Easy To Use With Silicone Keys
7.Oil Light/Service Reset: Support service lamp reset.
8.Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
9.Battery Management System (BMS), registers new battery to the BMS while battery replacement.
10.Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator
11.Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
12.SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
13.Injector coding, relearn the injector control parameter while the injector renewed or replaced
14.The Print Data function allows you printing out diagnostic data recorded by the scan
15.Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
16.DTC Library to lookup when user is operating this tool.
17.Upgrade Via PC
18.Multi-language: English, German, Dutch, Spanish, French.
Seventeen Advantages
▪Diagnose Single Brand of most Models (OBDII-16DLC)
▪Full System Diagnosis
▪Support Oil Service Reset
▪Electronic Parking Brake (EPB) system maintenance
▪Battery Management System (BMS)
▪Diesel Particulate Filter (DPF) Regeneration Control System
▪Electronic Throttle Control System (ETC)
▪Steering Angle Sensor (SAS) Calibration
▪Injector Coding(some vehicles do not enjoy this function)
▪Read & Clear DTC
▪Read Live Data
▪Support Battery Test
▪Support Data Review and Print
▪Full Speed Upgrade via PC
▪4.0″ TFT LCD, 480*320 Pixels
▪Support Multi-Language
OBDII FUNCTION
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the
vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More
Specifications
Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)
Contents:
VAWS V2.0 Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual
Shop Securely
12 Month Warranty
Worldwide Delivery
One-Touch Comfort-Softtop roof control for Convertible Audi A3/S3 Cabriolet (8V) MY 2014+ SmartTop
It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.
This Product Fits:
Audi A3/S3 Cabriolet (8V) MY 2014+
Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
STHFAI1
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
One-Touch Comfort-Softtop roof control for Convertible Audi TT Model 8S Year 2015 and later SmartTop
It works similar to power-windows and opens or closes the roof automatically at the touch of a button. It is not necessary to stop the vehicle and pull the handbrake to operate the roof.
This Product Fits:
Audi TT Model 8S Year 2015+
Remote control of convertible top
Open/Close your convertible top using the original factory remote control key / key fob.
Open/Close the top while driving
Never have to stop again for your top: Open/Close your top while driving. Speed programmable up to 40kmh.
One-Touch power convertible top
"One-Touch" convertible top operation allows your top to open or close automatically.
Individually programmable
Configure all functions of the module to meet your personal preferences via USB setup.
Passive / Invisible mode
Turn the whole module off with an easy key sequence. Ideal when letting someone else drive your car.
Reversible plug-in installation
Remove any time allowing sale or return of a leased vehicle in its original condition.
Separate window control
Raise and lower the windows separately by remote without activating the top.
Top convenience mode
Turning the ignition on or off does not interrupt convertible top operation.
Invert switch logic
Direction of center console top switch can be changed to "pull to open" and "push to close".
Comfort window close
One-Touch operation when closing all windows simultaneously via the separate driver's door switch.
Keyless Go top control
Open and close the top by touching the door handle three times.
Plug-n-Play Wiring harness
Custom designed plug-in-between wiring harness for extremely simple and quick installation included.
USB Port for easy setup / updates
This module can be configured and updated using
any Mac or PC.
Shop Securely
12 Month Warranty
Worldwide Delivery
Simota Carbon Fiber Air Intake System CF for AUDI A4 2.0T 2006-2008
Code: CF661-04
Fits:
AUDI A4 2.0T 2006-2008
1. 100% handmade carbon kits, well performed in heat isolation.
2. Customization acceptable.
3. Horn shape designed at air induction path based on aerodynamic to extract maximum cold air directly.
4. Washable and durable twin-inlet high flow air filter.
Shop Securely
12 Month Warranty
Worldwide Delivery