Caliper Seals |Pistons
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)


- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)

Fits:
Porsche 911 1965-83
Porsche 911 (930) Turbo 3.0L 1975-77





For brake systems and is highly temperature-resistant (up to 1,000°C).
Available in 75ml tube and 5ml sachet
The advantages of Cera Tec:
• Non-conductive and contains no solids
• Suitable for ABS
• Facilitates brake installation
• Reduces brake squealing
• Protects against scoring and corrosion
• Free of copper and acids
• Pressure-resistant / high viscosity
Cera Tec is also suitable for lubricating:• Disc- and drum-brake systems
• Compressors
• Centralised lubrication systems
• Axle bearings
• Chains
• Seat rails
• Sunroof tracks
• Battery terminals
Application:
Apply a thin layer of Cera Tec on the marked sections
Find out about Textar product verification here





- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold individually; x4 required per caliper, x8 required in total.

Porsche 911 Turbo (930) 1978-89
Porsche 911 Carrera 3.2L 1984-89 - Models With PR 491 (Turbo Look)
Diagram ref. 36.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93035155104
The product you are viewing cross references to these numbers





- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 914 (1970-1976)
Sold Each.
x2 Required Per Car.
Fits On To Left And Right Brake Calipers.
Fits:
Porsche 911 1970>>1971
Porsche 911 / 912 1969>>1969
Porsche 914 1970>>1976
Diagram Ref No 28
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90435590200
The product you are viewing cross references to these numbers





Hydra tec lubricant for maintenance work and protection Textar
Available in 180ml Tube, 75ml Tube or 5ml Sachet
The Advantages of Hydra Tec:
- Facilitates the installation of hydraulic brake components
- Tested compatibility with commercially available braking fluids (DOT3, DOT4, DOT4LV, DOT5.1)
- Free of mineral oils and compatible with EPDM rubber
- In addition, running surfaces are protected against corrosion
Hydra Tec is suitable for lubricating:
- Cylinder running surfaces
- Pistons
- Sealing elements
Application:
Apply a thin layer of Hydra Tec on the marked sections.
Note:
Hydra Tec should be applied thinly and evenly.
Never use mineral oils or greases as substitutes.
Do not apply the product on friction surfaces of brake pads or brake discs.
Find out about Textar product verification here





- Porsche 911 1978-1989 3.3L Turbo (930)
Sold each - 8 required per car


Fits:
Porsche 911 (930) Turbo 1978-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 38
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93035155501
The product you are viewing cross references to these numbers






Titanium is a very poor conductor of heat, and reduces the heat transfer by approximately 90%
The standard aluminum brake pistons are light but very heat conductive which means the thermal energy from the brake pad transfers easily to the brake fluid.
The castellated contact edge promotes airflow into the piston cavity and reduces the contact surface with the pad and thus further decreases heat transfer to the brake fluid.
We designed using advanced engineering simulations (FEA) to achieve the same weight than their aluminum counterparts while maintaining superior structural strength.
As opposed to stainless steel pistons, our titanium alloy pieces weigh the same as the original aluminum pistons; and they will never corrode and damage the seals causing the caliper to leak.
Price is per pair of pistons
**Please check the piston diameter you need as some calipers take two different sizes. Sizes shown are the piston outer diameter (OD)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SL-BKP-
The product you are viewing cross references to these numbers


