Powerflex Black Series Bushes
Drop link bushes, Rear. Porsche 924 / 944 / 968 Powerflex Black Series
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Sold as 4 bushes (both rear drop links, these are replacement bushes the drop links are not included)
OEM Part Number: 477511051A
SET OF 4. 
Fits:
Porsche 924 and S (all years)
Porsche 944 (1982 - 1985)
Porsche 944 inc S2 & Turbo (1985 - 1991)
Porsche 968 (1992-1995)
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 35
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-211BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Drop Link Polyurethane Bush, 21mm for Porsche 924 Front Powerflex Black Series
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
FRONT
Quantity: 2
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 21mm, anti roll bars. The bushes fit inside the drop link
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Fits:
Porsche 924 1976-85
Please note price shown is for quantity 2.
Click 'Zoom in' to display fits inside diagram - Ref No 6.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-205-21BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Anti-Roll Bar Bush (Polyurethane) - 20mm - for Porsche 924 / 924 Turbo / 924 S / 944. Powerflex Black Series
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
This round bush has a 40mm outer diameter and an overall length of 55mm. These 20mm bushes directly replace Porsche part numbers 477411053G and 477411053R.
Porsche 924 1982*
Porsche 924 1983-85
Porsche 924 Turbo 1982*
Porsche 924 Turbo 1983-85
Porsche 924 S 1986-88 - Vehicles Without Sports Suspension (PR 030)
Porsche 944-1 1982-85 - Vehicles Without Rear Anti-Roll Bar (PR 404)
Porsche 944-2 1985-86 - Vehicles Without Sports Suspension (PR 030)
Diagram ref. 3.
*NOTE: Porsche updated the 924's front anti-roll bar design during the 1982 model year. If your 1982 Porsche 924 has a VIN from F 92-CN402 198 onward (or F 92-CN450 832 onward for North America), it will be compatible.
For 1982 Porsche 924 Turbo models, compatibility starts from F 93-CN100 306 onward (or F 93-CN150 332 onward for North American and Japanese models). Please ensure you check your VIN to confirm fitment. If you're unsure, please do not hesitate to contact us with your vehicle's VIN number for confirmation.
Additionally, due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
The Powerflex Range:
Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Powerflex Materials:
The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.
Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.
Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-306-20BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Anti-Roll Bar Bush (Polyurethane) - 23mm - for Porsche 924 / 924S / 924 Turbo / 944. Powerflex Black Series
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
This round bush has a 40mm outer diameter and an overall length of 55mm. These 23mm bushes directly replace Porsche part number 477411053J.
Porsche 924 1982* - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 1983-85 - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 Turbo 1982* - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 Turbo 1983-85 - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 S 1986-88 - Vehicles With Sports Suspension (PR 030)
Porsche 944-1 1984-85 - Vehicles With Rear Anti-Roll Bar (PR 404)
Porsche 944-2 1985-86 - Vehicles With Rear Anti-Roll Bar / Sports Suspension (PR 030/PR 404)
*NOTE: Porsche updated the 924's front anti-roll bar design during the 1982 model year. If your 1982 Porsche 924 has a VIN from F 92-CN402 198 onward (or F 92-CN450 832 onward for North America), it will be compatible.
For 1982 Porsche 924 Turbo models, compatibility starts from F 93-CN100 306 onward (or F 93-CN150 332 onward for North American and Japanese models). Please ensure you check your VIN to confirm fitment. If you're unsure, please do not hesitate to contact us with your vehicle's VIN number for confirmation.
Additionally, due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
Diagram ref. 3.
*NOTE: Due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
The Powerflex Range:
Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Powerflex Materials:
The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.
Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.
Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-306-23BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Anti-Roll Bar to Wishbone Bush - Set of 2. Porsche 924 & S / 944
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Diagram ref. 6
Price is for a set of two.
Fits:
Porsche 924 1982-85*
Porsche 924S 1986-88
Porsche 944 1982-85
*Please Be Advised: Porsche revised the front suspension for the 924 in 1982. The VIN split can be found below, but it is fairly simple to perform a visual check - please see the product images. This product is intended for the later-style suspension setup, which uses an aluminium bracket to connect the anti-roll bar to the front wishbone. The part number for this bracket is 94434373500 (LEFT) and 94434373600 (RIGHT).
VIN SPLIT:
F92-CN402 198 Onwards (924)
F92-CN450 832 Onwards (US/Canadian 924 Models)
F93-CN100 306 Onwards (Turbo)
F93-CN150 332 Onwards (US/Canadian/Japanese 924 Turbo Models)
Powerflex's Range...
Road Series – for Road and fast Road use.
POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series – for Track and Motorsport use.
POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection – for Classic and Restoration use.
POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-307BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Wishbone Bush Rear Porsche 924S / 944 Powerflex Black Series
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
PAIR
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85
Diagram Ref No 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF85-213BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Alxe Bearing Flange Outer Mounting Bush. Porsche 924 / 944 / 968 Powerflex Black Series
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Rear Alxe Carrier Outer Mounting Bush.
SET OF2. Replacement for Porsche parts No. 477501069A
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-88
Porsche 944 1986-91
Porsche 968 1992-95
Diagram Ref no 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-220BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Anti Roll Bar Polyurethane Bushes 22mm for Porsche 924 / 964 Turbo Powerflex Black Series
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924 2.0L 1980-85
Size: 22mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313E / PCG411313E
SET OF 2
Fits:
Porsche 924 1978 REAR AXLE
Porsche 964 Turbo (965) REAR AXLE
Click 'Zoom in' for large parts diagram.
Diagram Ref No 17.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-209-22BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Trailing Arm Bush. Porsche 924/ 944 / 968 Powerflex Black Series
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
SET OF 2
Replacement for Porsche parts No. 477501541
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95
Fits into the end of Diagram Ref no 4.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-222BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Wishbone Inner Bush Front. Porsche 924S / 944 Powerflex Black Series
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
PAIR
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85
Diagram Ref No 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF85-211BLK
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
-
Strut Brace
-
Anti Roll Sway Bar
-
Lowering Springs
-
Control Arms Front
-
Control Arms Rear
-
Drop links Front
-
Drop links Rear
-
Top mounts Front
-
Steering Track Rods
-
Spring plates
-
Torsion Bars
-
Rear Sub Frame
-
Bilstein SPORT B6 Dampers
-
Superpro Polyurethane Bushes
-
Powerflex Polyurethane Bushes
-
Powerflex Heritage Collection
-
Spax Suspension
-
H&R Adjustable Suspension Kits
-
KYB Suspension
