Powerflex Heritage Collection
Front Anti-Roll Bar Bush (Polyurethane) - 21mm - for Porsche 964 Turbo & 993 Carrera. Powerflex Heritage Collection
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
Porsche 964 Carrera - With PR 491 (Turbo Look)
Porsche 964 Turbo 1991-94
Porsche 993 Carrera - Excludes C4S & Models With Sports Suspension (PR 030)
Diagram ref. 3.
These bushes are a direct replacement for the following Porsche part numbers: 96434379221
NOTE: Due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
The Powerflex Range:
Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Powerflex Materials:
The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.
Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.
Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-601-21H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Anti-Roll Bar Bush (Polyurethane) - 22mm - for Porsche 964 & 993 Carrera/Turbo. Powerflex Heritage Collection
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
Porsche 964 Carrera 1989-94 - With Sports Suspension (PR 030)
Porsche 993 Carrera 1996-98 - With Sports Suspension (PR 030)
Porsche 993 Turbo 1995-98
Diagram ref. 3.
These bushes are a direct replacement for the following Porsche part numbers: 96434379222
NOTE: Due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
The Powerflex Range:
Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Powerflex Materials:
The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.
Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.
Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-601-22H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Lower Rear Control Arm/Toe Link Bush for Porsche 993 Carrera / Turbo / GT2 1994-1998
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
With no replacement bushes available from Porsche, these uprated Powerflex bushes provide a high-performance, durable, and cost-effective alternative to purchasing a complete arm.
Fits:
Porsche 993 Carrera 1994-98
Porsche 993 Carrera RS 1995-96
Porsche 993 Turbo 1995-98
Porsche 993 GT2 1996-98
Powerflex diagram ref. 13.
Sold as a set of two, these bushes are a direct replacement for the inner bush on part number 99333104301 - the rearmost control arm on the rear axle, which manages toe angle adjustment.
The Powerflex Range:
Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Powerflex Materials:
The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.
Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.
Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-913H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Subframe Mounting Bush. Porsche 993 Powerflex Heritage Collection
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Sold as a pack of 4 (both subframes)
This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.
Fits:
Porsche 993 1993-95
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-920H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Upper Front Arm Inner Bush. Porsche 993 Powerflex Heritage Collection
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Sold as a pair (both arms)
This part replaces OEM part number: 99333104502.
Fits:
Porsche 993 1993-95
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-910H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Upper Rear Arm Inner Bush. Porsche 993 Powerflex Heritage Collection
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Sold as a pair (both arms)
This part replaces OEM part number: 99333104700.
Fits:
Porsche 993 1993-95
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-911H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Stabilizer Bar Polyurethane Bushes 18mm for Porsche 911 / 944 / 964 / 968 / 993 Powerflex Heritage Collection
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
Size: 18mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313B
Fits:
Porsche 911 1978-85 Rear axle
Porsche 911 TURBO 1978-85 Rear axle
Porsche 911 TURBO 1989 Rear axle
Porsche 944 1985-91 Rear axle Please choose by size
Porsche 964 RS Rear axle
Porsche 964 C4 Rear axle Please choose by size
Porsche 968 Rear axle Cars with Sport Suspension & tiptronic transmission
Porsche 993 C2/C4 Rear axle Cars with standard suspension
Porsche 993 C2S/C4S Rear axle Cars with Sport Suspension - Please choose by size
Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.
Pack of 2. Two bushes per car
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-209-18H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Stabilizer Bar Polyurethane Bushes 20mm for Porsche 911 / 924 / 944 / 964 / 993 Powerflex Heritage Collection
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
Size: 20mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313C
Fits:
Porsche 911 SC 1974-83 Front axle
Porsche 911 TURBO 1985-88 Rear axle
Porsche 924 1976-77 Front axle
Porsche 924S 1986-88 Rear axle Cars with Sport Suspension
Porsche 944 1982-85 Front axle
Porsche 944 1985-88 Rear axle - Please choose by size
Porsche 964 1991-94 C2/C4 Rear axle Cars with manual transmission - Please choose by size
Porsche 993 C2S/C4S/RS Rear axle Cars with Sport Suspension - Please choose by size
Click 'Zoom in' to see pats diagram.
Diagram Ref No 17.
Pack of 2. Two bushes per car.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-209-20H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Transmission Mount Bracket Bush. Porsche 964 / 993 RWD cars Powerflex Heritage Collection
- Porsche 964 (911) C2 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C2S 1994-97
Replacement for OE Porsche part: 96437507003, 96437507004
This bush fits the following RWD vehicles:
Porsche 964 C2 1992-1994 Triptronic - Transmission type A50.02/A50.03
Porsche 993 C2 1994-1998 Manual - Transmission type G50.20/G51.21/G50.32/G50.33
Porsche 993 C2 1994-1998 Tiptronic - Transmission type A50.04/A50.05
Click 'Zoom in' for large parts diagram.
Fits to no 16 on diagram.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-124H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Transmission mount bracket small bush. Porsche 964 / 993 RWD cars Powerflex Heritage 96437521101
- Porsche 964 (911) C2 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C2S 1994-97
Replacement for OE Porsche part: 96437521101
Diagram Position: 21
This bush fits the following RWD vehicles:
Porsche 964 C2 1990-1994 Manual - Transmission type G50.03 / G50.04 / G50.05
Porsche 964 Turbo 1991-1992 Manual - Transmission type G50.52
Porsche 964 C2 1992-1994 Tiptronic - Transmission type A50.02 / A50.0
Porsche 993 C2 1994-1998 Manual - Transmission type G50.20 / G51.21
Porsche 993 Carrera RS 1995 Manual - Transmission type G50.31 / G50.32 / G50.33
Porsche 993 C2 1994-1998 Tiptronic - Transmission type A50.04 / A50.05.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-121H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Transmission mount large bush insert. Porsche 964 / 993 RWD cars Powerflex Heritage Collection
- Porsche 964 (911) C2 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C2S 1994-97
OEM Part Number: 96437505502
OEM Part Number: 96437505580
For a complete bush please use PFR57-125.
This bush fits the following RWD vehicles:
Porsche 964 C2 1990-1994 Manual - Transmission type G50.03/G50.04/G50.05)
Porsche 964 Turbo 1991-1992 Manual - Transmission type G50.52)
Porsche 964 C2 1992-1994 Tiptronic - Transmission type A50.02/A50.03
Porsche 993 C2 1994-1998 Manual - Transmission type G50.20/G51.21
Porsche 993 C2 1994-1998 Tiptronic - Transmission type A50.04/A50.05
Click 'Zoom in' for large parts diagram.
Fits to number 23 on diagram.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-126H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Transmission mount large bush. Porsche 964 / 993 RWD cars Powerflex Heritage Collection
- Porsche 964 (911) C2 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C2S 1994-97
For an insert only please use PFR57-126.
Replacement for OE Porsche part: 96437505502, 96437505580,
This bush fits the following RWD vehicles:
Porsche 964 C2 1990-1994 Manual - Transmission type G50.03/G50.04/G50.05)
Porsche 964 Turbo 1991-1992 Manual - Transmission type G50.52)
Porsche 964 C2 1992-1994 Tiptronic - Transmission type A50.02/A50.03
Porsche 993 C2 1994-1998 Manual - Transmission type G50.20/G51.21
Porsche 993 C2 1994-1998 Tiptronic - Transmission type A50.04/A50.05
Click 'Zoom in' for large parts diagram.
Diagram ref no 23
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-125H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
Wishbone Inner Front Bush. Porsche 964 / 993 Powerflex Heritage Collection
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
PAIR
Fits:
Porsche 964 1989-94
Porsche 993 1994-98
Click 'Zoom in' for large parts diagram.
Fits to No 12 on the diagram.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-102H
The product you are viewing cross references to these numbers
Shop Securely
12 Month Warranty
Worldwide Delivery
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
-
Strut Brace
-
Anti Roll Sway Bar
-
Lowering Springs
-
Control Arms Front
-
Control Arms Rear
-
Drop links Front
-
Drop links Rear
-
Engine mounts
-
Gearbox mounts
-
Top mounts Front
-
Top mounts Rear
-
Steering Track Rods
-
Ball Joints
-
Front Sub frame
-
Rear Sub Frame
-
Air Lift System
-
DesignTek Coilover Suspension Kit
-
Bilstein SPORT B6 Dampers
-
Bilstein SPRINT B8 Dampers
-
Bilstein B12 Tuning Suspension Kit
-
Bilstein B14 PSS Coilover Suspension Kits
-
Bilstein B16 PSS9/10 Height Damping Adjustable Coilover Kit
-
Bilstein B16 DampTronic (PASM)
-
Bilstein EVO SE / EVO R
-
Ohlins Road & Track Suspension
-
Koni Sports
-
Koni Special Active
-
Classic |Safari & Coil Over Kits
-
Motorsport & Track
-
Superpro Polyurethane Bushes
-
Powerflex Polyurethane Bushes
-
Powerflex Black Series Bushes
-
H&R Adjustable Suspension Kits
-
H&R Cup-Kit Sport Suspension
-
KW Variant 1 Inox Suspension kits
-
KW Variant 2 Inox Adjustable Rebound Damping Suspension
-
KW Variant 3 Adjustable Suspension kits
-
KW Clubsport Coilover Suspension Kits
-
KW Clubsport Coilover Suspension Kits WITH Top Mounts
-
Porsche Kits
-
Sachs Performance Suspension CSS
-
Nitron Automotive Range
