价格匹配保证
全球配送
12 个月保修
专业工具
按品牌过滤
Alternator fan pulley wrench. Porsche 911 / 912
代码: 99957104702/1
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Alternator fan pulley wrench.
Reference numbers: 99957104702
Fits:
Porsche 911 F/G
Porsche 912
This hook wrench is an optimized version of the original on-board tool and fits better in the hole of the pulley thanks to the extended and curved pin. The locking key is a must for every 911 F/G model owner and allows you to separate the pulley from the fan wheel, for example to change the alternator V-belt.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99957104702
您正在查看的产品与这些编号存在交叉引用关系
Reference numbers: 99957104702
Fits:
Porsche 911 F/G
Porsche 912
This hook wrench is an optimized version of the original on-board tool and fits better in the hole of the pulley thanks to the extended and curved pin. The locking key is a must for every 911 F/G model owner and allows you to separate the pulley from the fan wheel, for example to change the alternator V-belt.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
99957104702
5991
99957104702
您正在查看的产品与这些编号存在交叉引用关系
价格: €26.00
库存
安全购物
12 个月保修
全球交付
轴承润滑脂。保时捷 356 / 911 / 912 / 924 / 928 / 944 / 968
代码: PCG04311000
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Information
轴承润滑脂（200克）
#保时捷#
適用於:
保时捷 356（1950 年至 1965 年）
保时捷 911/912（1965 年至 1989 年）
保时捷 914（1970 年至 1976 年）
保时捷 924 / 924 S（1976 年至 1988 年）
保时捷 928（1978 年至 1995 年）
保时捷 944 /2（1982 年至 1991 年）
保时捷 968（1992 年至 1995 年）
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PCG04311000
您正在查看的产品与这些编号存在交叉引用关系
#保时捷#
適用於:
保时捷 356（1950 年至 1965 年）
保时捷 911/912（1965 年至 1989 年）
保时捷 914（1970 年至 1976 年）
保时捷 924 / 924 S（1976 年至 1988 年）
保时捷 928（1978 年至 1995 年）
保时捷 944 /2（1982 年至 1991 年）
保时捷 968（1992 年至 1995 年）
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
PCG04311000
PCG04311000
您正在查看的产品与这些编号存在交叉引用关系
价格: €27.80
由供应商供货
安全购物
12 个月保修
全球交付
博克发动机工作台支架。保时捷 356 / 911 / 964 / 996 / 997
代码: 6822
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Information
博克 (Bock) 发动机工作台支架。
#北环赛道#
适合：
保时捷 356
保时捷 911 912 F/G
保时捷 930
保时捷 914
保时捷 964
保时捷 993
保时捷 996
保时捷 997
保时捷 986/987 Boxster
保时捷 987c Cayman
参考编号：
00072120100, 000.721.201.00, 000 721 201 00, P201
为改装您的保时捷发动机，我们提供发动机支架。法兰表面与悬臂一起连接到安装轴，可确保发动机牢固且同时易于安装到滚动发动机支架上。
在这里，您可以获得所需的支架，以便能够将发动机支架安装在工作台或类似物上。
我们的项目包括适用于所有经典保时捷以及 3.4-3.8L 水冷发动机的发动机支架。
该支架适用于直径为 60 毫米的发动机支架。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6822
您正在查看的产品与这些编号存在交叉引用关系
#北环赛道#
适合：
保时捷 356
保时捷 911 912 F/G
保时捷 930
保时捷 914
保时捷 964
保时捷 993
保时捷 996
保时捷 997
保时捷 986/987 Boxster
保时捷 987c Cayman
参考编号：
00072120100, 000.721.201.00, 000 721 201 00, P201
为改装您的保时捷发动机，我们提供发动机支架。法兰表面与悬臂一起连接到安装轴，可确保发动机牢固且同时易于安装到滚动发动机支架上。
在这里，您可以获得所需的支架，以便能够将发动机支架安装在工作台或类似物上。
我们的项目包括适用于所有经典保时捷以及 3.4-3.8L 水冷发动机的发动机支架。
该支架适用于直径为 60 毫米的发动机支架。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6822
6822
00072120100
您正在查看的产品与这些编号存在交叉引用关系
€343.91
当前 €326.71
库存
安全购物
12 个月保修
全球交付
凸轮/动力转向阻断板适用于保时捷 911 / 964 / 993
代码: SR044
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Information
凸轮/动力转向阻断板适用于保时捷 911 / 964 / 993
#斯托姆斯基#
使用此板封闭 993 的凸轮塔上的动力转向泵开口，或封闭涡轮增压器和早期 911 的凸轮塔上的油泵和喷射泵开口。此板是定制设计的，适用于库存和非库存凸轮。
阳极氧化铝。
适用于 1998 年之前的 911。
单独出售。
#斯托姆斯基#
使用此板封闭 993 的凸轮塔上的动力转向泵开口，或封闭涡轮增压器和早期 911 的凸轮塔上的油泵和喷射泵开口。此板是定制设计的，适用于库存和非库存凸轮。
阳极氧化铝。
适用于 1998 年之前的 911。
单独出售。
€94.06
当前 €89.36
库存
安全购物
12 个月保修
全球交付
Cam timing indicator fixture (dual) for Porsche 911 / 964 / 993
代码: SR098
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Information
Cam timing indicator fixture (dual) for Porsche 911 / 964 / 993
STOMSKI RACING finally takes the guess work out of timing the 911 engines. No longer do you need to hassle with convoluted setups, indicator contacts slipping off of the valve retainer, or measurements that will not repeat. This fixture indexes off of two cam carrier studs and literally takes only 10 seconds to setup. Once in place, the SR098 consistently and repeatedly holds the dial indicator contact in the same place on the valve retainer- EVERY time.
Includes adapters and extensions for both metric and AGD (inch) indicators.
Anodized aluminum for years of service.
For all 911s including the 993.
Please note: Gauges sold separately.
STOMSKI RACING finally takes the guess work out of timing the 911 engines. No longer do you need to hassle with convoluted setups, indicator contacts slipping off of the valve retainer, or measurements that will not repeat. This fixture indexes off of two cam carrier studs and literally takes only 10 seconds to setup. Once in place, the SR098 consistently and repeatedly holds the dial indicator contact in the same place on the valve retainer- EVERY time.
Includes adapters and extensions for both metric and AGD (inch) indicators.
Anodized aluminum for years of service.
For all 911s including the 993.
Please note: Gauges sold separately.
€218.86
当前 €207.92
库存
安全购物
12 个月保修
全球交付
外倾角调整工具。保时捷 911/944
代码: 1118
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
外倾角调整工具。后轴。
保时捷编号 00072191710
#北环赛道#
适合：
保时捷 911
保时捷 968
保时捷 944
该特殊工具适用于所有带有扭力杆悬架的保时捷 911、924/944/968 拖曳臂后轴，用于调整外倾角。
为了进行调整，将车辆顶起，将半拖臂连同两个螺钉连接一起松开，并通过偏心工具将其旋转至车轴臂上。
该工具表面为镀锌结构，带有钝化层。
“德国制造”品质
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1118
您正在查看的产品与这些编号存在交叉引用关系
保时捷编号 00072191710
#北环赛道#
适合：
保时捷 911
保时捷 968
保时捷 944
该特殊工具适用于所有带有扭力杆悬架的保时捷 911、924/944/968 拖曳臂后轴，用于调整外倾角。
为了进行调整，将车辆顶起，将半拖臂连同两个螺钉连接一起松开，并通过偏心工具将其旋转至车轴臂上。
该工具表面为镀锌结构，带有钝化层。
“德国制造”品质
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1118
1118
00072191710
您正在查看的产品与这些编号存在交叉引用关系
€30.94
当前 €29.39
库存
安全购物
12 个月保修
全球交付
Camshaft drive gear/inner sprocket puller for Porsche 911
代码: SR079
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Cam drive gear/inner sprocket puller for Porsche 911
More than occasionally the inner sprocket on the end of the 911 camshaft is jammed or fused in place and refuses to budge. The confined space of the chain box makes it impossible to leverage the gear off, and even if you can get an edge, chances are you will only cock the gear, jamming it further, or possibly breaking a tooth on the gear (or even mar the cam itself).
STOMSKI RACING's SR079 centers over the end of the camshaft and slips behind the sprocket flange, allowing you to smoothly and effortlessly slide the gear off– protecting both the camshaft and the gear itself (and the curse jar!). Black oxide hardened steel with stainless steel drive bolt.
Designed to pull the seized inner sprockets from the ends of the camshafts on and early air cooled 911 likes SC's etc, probably up to mid-993 as we think by then they stopped using the pin you slide in from outer sprocket into available slot in the inner sprocket which the tool is for, it's held in place with woodruff key to end of camshaft.
More than occasionally the inner sprocket on the end of the 911 camshaft is jammed or fused in place and refuses to budge. The confined space of the chain box makes it impossible to leverage the gear off, and even if you can get an edge, chances are you will only cock the gear, jamming it further, or possibly breaking a tooth on the gear (or even mar the cam itself).
STOMSKI RACING's SR079 centers over the end of the camshaft and slips behind the sprocket flange, allowing you to smoothly and effortlessly slide the gear off– protecting both the camshaft and the gear itself (and the curse jar!). Black oxide hardened steel with stainless steel drive bolt.
Designed to pull the seized inner sprockets from the ends of the camshafts on and early air cooled 911 likes SC's etc, probably up to mid-993 as we think by then they stopped using the pin you slide in from outer sprocket into available slot in the inner sprocket which the tool is for, it's held in place with woodruff key to end of camshaft.
€175.45
当前 €166.68
库存
安全购物
12 个月保修
全球交付
适用于保时捷 911 >>1980 的凸轮轴螺母工具
代码: SR051
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
保时捷 911 凸轮螺母工具
#斯托姆斯基#
这种高品质工具是迄今为止拆卸早期 911 发动机（到 1980 1/2 年）凸轮轴末端螺母的最佳方法。
12 点套筒精确地套在凸轮螺母（46 毫米）上，而凸轮支架则穿过套筒的中心 - 确保不会滑动、不会再有螺母损坏，并且更容易扭矩螺母。
黑色氧化物钢/铸件。
更换工厂工具 P202 和 P203。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR051
您正在查看的产品与这些编号存在交叉引用关系
#斯托姆斯基#
这种高品质工具是迄今为止拆卸早期 911 发动机（到 1980 1/2 年）凸轮轴末端螺母的最佳方法。
12 点套筒精确地套在凸轮螺母（46 毫米）上，而凸轮支架则穿过套筒的中心 - 确保不会滑动、不会再有螺母损坏，并且更容易扭矩螺母。
黑色氧化物钢/铸件。
更换工厂工具 P202 和 P203。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR051
90110517200
901105181
您正在查看的产品与这些编号存在交叉引用关系
€329.20
当前 €312.74
库存
安全购物
12 个月保修
全球交付
Camshaft tool securing bar 9191 for Porsche 911 cam timing
代码: 00072191910/1
产品车辆组
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Camshaft tool securing bar 9191 for Porsche 911 cam timing. Camshaft tool is compatible with Porsche 9191. It secures the camshaft from rotating during R&R of camshaft nut. It is used to adjust valves or set cam timing for Porsche 911 80-89
Fits:
Porsche 911 1980-89
Application
Porsche 911 80-89: Compatible with Porsche 9191
Specification: Black colour
Features Highlights: Strong and durable
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
00072191910
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 1980-89
Application
Porsche 911 80-89: Compatible with Porsche 9191
Specification: Black colour
Features Highlights: Strong and durable
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
00072191910
00072191910
P9191
您正在查看的产品与这些编号存在交叉引用关系
€117.81
当前 €100.14
库存
安全购物
12 个月保修
全球交付
Circlip injector™ for Prosche 911
代码: SR07
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Circlip injector™ for Prosche 911
The cumbersome, awkward task of installing the wrist pin circlips into pistons has just gone from chore to joy. No more flying circlips, gouged fingers, scratched pistons, contortions, or swearing. Simply slip the circlip into the Circlip Injector Sleeve, insert the Circlip Injector Plunger, and "inject" the circlip into its wrist pin groove. Quick. Painless. Simple. Precisely machined from stainless steel.
Available in six stock sizes (19-24mm) and other sizes by special order (tool sizing corresponds to wrist pin diameter).
US Patent 8,302,304.
PDF Instructions (SR072)
The cumbersome, awkward task of installing the wrist pin circlips into pistons has just gone from chore to joy. No more flying circlips, gouged fingers, scratched pistons, contortions, or swearing. Simply slip the circlip into the Circlip Injector Sleeve, insert the Circlip Injector Plunger, and "inject" the circlip into its wrist pin groove. Quick. Painless. Simple. Precisely machined from stainless steel.
Available in six stock sizes (19-24mm) and other sizes by special order (tool sizing corresponds to wrist pin diameter).
US Patent 8,302,304.
PDF Instructions (SR072)
价格低至: €125.44
安全购物
12 个月保修
全球交付
Connector removal tool - for VAG, Porsche
代码: 6547
Information
Connector removal tool - for VAG, Porsche
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6547
您正在查看的产品与这些编号存在交叉引用关系
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6547
6547
您正在查看的产品与这些编号存在交叉引用关系
€37.78
当前 €35.89
库存
安全购物
12 个月保修
全球交付
Connector removal tool long series - for VAG/Porsche
代码: 7859
Information
Connector removal tool long series - for VAG/Porsche
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
7859
您正在查看的产品与这些编号存在交叉引用关系
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
7859
7859
您正在查看的产品与这些编号存在交叉引用关系
€23.16
当前 €22.00
库存
安全购物
12 个月保修
全球交付
Crankcase head stud driver for Porsche All 911 964 993 996 / 997 GT3 & Turbo Models 1965-On
代码: SR099D
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
Information
Crankcase head stud driver for Porsche All 911 964 993 996 / 997 GT3 & Turbo Models 1965-On
Double-nutting a head stud to install it into the engine case not only takes time, but can be stressful for the threads, and can lead to variations in stud depth (unless you are extra careful when removing the double nuts). Protect your hardware investment and speed installation by using STOMSKI RACING's Head Stud Driver.
Made from black oxide finished hardened steel, this uniquely designed tool threads onto the head stud but will not clamp on to the threads, making installation faster, gentler, and more accurate.
Double-nutting a head stud to install it into the engine case not only takes time, but can be stressful for the threads, and can lead to variations in stud depth (unless you are extra careful when removing the double nuts). Protect your hardware investment and speed installation by using STOMSKI RACING's Head Stud Driver.
Made from black oxide finished hardened steel, this uniquely designed tool threads onto the head stud but will not clamp on to the threads, making installation faster, gentler, and more accurate.
€62.74
当前 €59.60
库存
安全购物
12 个月保修
全球交付
Crankshaft holder for Porsche 911
代码: SR021
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Crankshaft holder for Porsche 911
At last an elegant way to hold the 911 crankshaft for inspection, cleaning, disassembly, and rod bolt stretching. The crank rotates smoothly between centres to allow for complete access to all journals. Mounts vertically or horizontally in you bench mounted vice for optimal versatility.
Made from stainless steel and anodized aluminium.
At last an elegant way to hold the 911 crankshaft for inspection, cleaning, disassembly, and rod bolt stretching. The crank rotates smoothly between centres to allow for complete access to all journals. Mounts vertically or horizontally in you bench mounted vice for optimal versatility.
Made from stainless steel and anodized aluminium.
€416.02
当前 €395.22
库存
安全购物
12 个月保修
全球交付
气缸固定螺母，6 件套，适用于保时捷 911
代码: SR007
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
气缸固定螺母，6 件套，适用于保时捷 911
#斯托姆斯基#
这些专门设计和制造的螺母可在重建期间将 911 气缸固定到位。螺母可轻松旋转曲柄并安装活塞/气缸，而不会使气缸滑出机壳。采用 2011 铝材精心制造，阳极氧化处理，可使用多年。每个螺母都配有特殊的 Delrin 衬垫，以保护您的气缸。
一套六件。
#斯托姆斯基#
这些专门设计和制造的螺母可在重建期间将 911 气缸固定到位。螺母可轻松旋转曲柄并安装活塞/气缸，而不会使气缸滑出机壳。采用 2011 铝材精心制造，阳极氧化处理，可使用多年。每个螺母都配有特殊的 Delrin 衬垫，以保护您的气缸。
一套六件。
€72.35
当前 €68.73
库存
安全购物
12 个月保修
全球交付
DigiDix™ Digital degree wheel cam timing system for Porsche all 911 and GT3 engines
代码: SR095
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
Information
DigiDix™ Digital degree wheel cam timing system for Porsche all 911 and GT3 engines
A revolution in cam timing, STOMSKI RACING's DigiDix™ - Digital Degree Wheel - provides the most accurate, easy to use degree wheel ever. No more awkward setups, questionable readings, convoluted pointers, or imprecise measurements. With DigiDix™, simply bolt the sensor/adapter to the flywheel-end of the crankshaft and secure the torsion arm. Setup time is less than one minute. You are now ready to measure crank rotation to one tenth (.1) of one degree accuracy and repeatability.
DigiDix™ includes a 3 foot cable for easy reading anywhere on the engine and fits all 911 and GT3 engines (and others by special order). Storage case included.
STOMSKI RACING - "reinventing the wheel."
A revolution in cam timing, STOMSKI RACING's DigiDix™ - Digital Degree Wheel - provides the most accurate, easy to use degree wheel ever. No more awkward setups, questionable readings, convoluted pointers, or imprecise measurements. With DigiDix™, simply bolt the sensor/adapter to the flywheel-end of the crankshaft and secure the torsion arm. Setup time is less than one minute. You are now ready to measure crank rotation to one tenth (.1) of one degree accuracy and repeatability.
DigiDix™ includes a 3 foot cable for easy reading anywhere on the engine and fits all 911 and GT3 engines (and others by special order). Storage case included.
STOMSKI RACING - "reinventing the wheel."
€524.55
当前 €498.32
库存
安全购物
12 个月保修
全球交付
也可在这些页面找到
您可能也喜欢
流行车型
