价格匹配保证
全球配送
12 个月保修
专业工具
按品牌过滤
Engine case splitter for Porsche 911
代码: SR124
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
Information
Stomski Racing SR124 Engine case splitter for Porsche 911
No more hammering, chiseling, swearing, heating, prying or praying to get an 911 engine case apart. STOMSKI RACING'S SR124 ELEGANTLY and GENTLY separates the engine case halves and not only shortens the process of engine tear-down, but it also protects what doubtlessly is an expensive asset- the engine case itself. The rare #s matching early 911S sand-cast aluminum case, or the impossible to find 911 GT3 RSR case, or the early magnesium case that seems so fragile, all can NOW be protected from the threat of the block of wood and lead hammer, or the torch, or the pry-bar and chisel.
SR124 includes a CNC precision machined aluminum platform that you bolt to four head studs (ideally over #2 or #5) using the included thumbscrews. An over-sized drive-screw (stainless steel) is then threaded through the platform to mate with a high-load bearing in our specially designed rod cap that presses against the wrist pin of #2 or #5 connecting rod that is at bottom-dead-center. As you slowly use a wrench or ratchet to tighten the drive-screw, the torque of the SR124 splitter is evenly distributed through the entire crankshaft, pressing against ALL 8 main bearings. Once the slack is taken up, only GENTLE effort on the drive screw is required to split even the most belligerent of cases.
The SR124 platform is designed to work on all Mezger 911s (2.0 through 997) and includes Delrin inserts/sleeves that protect the head studs from scratches or dings.
No more hammering, chiseling, swearing, heating, prying or praying to get an 911 engine case apart. STOMSKI RACING'S SR124 ELEGANTLY and GENTLY separates the engine case halves and not only shortens the process of engine tear-down, but it also protects what doubtlessly is an expensive asset- the engine case itself. The rare #s matching early 911S sand-cast aluminum case, or the impossible to find 911 GT3 RSR case, or the early magnesium case that seems so fragile, all can NOW be protected from the threat of the block of wood and lead hammer, or the torch, or the pry-bar and chisel.
SR124 includes a CNC precision machined aluminum platform that you bolt to four head studs (ideally over #2 or #5) using the included thumbscrews. An over-sized drive-screw (stainless steel) is then threaded through the platform to mate with a high-load bearing in our specially designed rod cap that presses against the wrist pin of #2 or #5 connecting rod that is at bottom-dead-center. As you slowly use a wrench or ratchet to tighten the drive-screw, the torque of the SR124 splitter is evenly distributed through the entire crankshaft, pressing against ALL 8 main bearings. Once the slack is taken up, only GENTLE effort on the drive screw is required to split even the most belligerent of cases.
The SR124 platform is designed to work on all Mezger 911s (2.0 through 997) and includes Delrin inserts/sleeves that protect the head studs from scratches or dings.
£349.60
当前 £332.12
库存
安全购物
12 个月保修
全球交付
Engine head stud height setter for Porsche 911
代码: SR099
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Information
Head stud height setter for Porsche 911
Precisely set the height of head studs on all the 911 engines using this innovative tool. The Delrin insert protects the engine case from scratches or marring, while the adjustable three-piece anodized aluminium tubular construction provides complete flexibility for all engine setups, tools, and stud combinations.
For all 911s including GT3s.
Precisely set the height of head studs on all the 911 engines using this innovative tool. The Delrin insert protects the engine case from scratches or marring, while the adjustable three-piece anodized aluminium tubular construction provides complete flexibility for all engine setups, tools, and stud combinations.
For all 911s including GT3s.
£123.12
当前 £116.96
库存
安全购物
12 个月保修
全球交付
适用于保时捷 911 的发动机活塞/壳体喷射清洁剂
代码: SR052
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
适用于保时捷 911 的活塞/壳体喷射清洁剂
#斯托姆斯基#
最后，有一种简单的方法可以清洁和检查 911 机壳上的机壳/活塞喷射器。使用这种精密工具和压缩空气以及气枪强行打开喷射器并将其清理干净。此工具将机油槽两端密封，并允许空气通过喷射器孔口。无需拆卸/更换喷射器或猜测它们是否畅通。
阳极氧化铝/黄铜。
可配备或不配备气枪。
#斯托姆斯基#
最后，有一种简单的方法可以清洁和检查 911 机壳上的机壳/活塞喷射器。使用这种精密工具和压缩空气以及气枪强行打开喷射器并将其清理干净。此工具将机油槽两端密封，并允许空气通过喷射器孔口。无需拆卸/更换喷射器或猜测它们是否畅通。
阳极氧化铝/黄铜。
可配备或不配备气枪。
价格低至: £77.98
安全购物
12 个月保修
全球交付
发动机支架，用于发动机支架。保时捷 356 911 F/G 914 993 997T
代码: 6898
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
- Porsche 914 (1970-1976)
Information
发动机支架用于发动机支架。
#北环赛道#
适合：
保时捷 356
保时捷 911 912 F/G
保时捷 930
保时捷 914
保时捷 964
保时捷 993
保时捷 996 turbo/GT2/GT3
保时捷 997 turbo/GT2/GT3
吸料管外径D=60mm
参考编号：
00072120100, 000.721.201.00, 000 721 201 00, P201
为了改装您的保时捷发动机，我们提供此发动机支架。法兰表面与悬臂一起连接到安装轴，可安全且同时轻松将发动机连接到滚动发动机支架上。或者，您可以使用发动机支架通过轴承座将发动机安装到工作台上。我们的计划中提供带和不带安装支架的所有经典保时捷的发动机支架。
注意：零件的颜色可能与所示颜色不同。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6898
您正在查看的产品与这些编号存在交叉引用关系
#北环赛道#
适合：
保时捷 356
保时捷 911 912 F/G
保时捷 930
保时捷 914
保时捷 964
保时捷 993
保时捷 996 turbo/GT2/GT3
保时捷 997 turbo/GT2/GT3
吸料管外径D=60mm
参考编号：
00072120100, 000.721.201.00, 000 721 201 00, P201
为了改装您的保时捷发动机，我们提供此发动机支架。法兰表面与悬臂一起连接到安装轴，可安全且同时轻松将发动机连接到滚动发动机支架上。或者，您可以使用发动机支架通过轴承座将发动机安装到工作台上。我们的计划中提供带和不带安装支架的所有经典保时捷的发动机支架。
注意：零件的颜色可能与所示颜色不同。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6898
6898
您正在查看的产品与这些编号存在交叉引用关系
£445.00
当前 £422.75
库存
安全购物
12 个月保修
全球交付
Exhaust head stud repair kit for Porsche Air-cooled 911’s
代码: SR065
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Information
Exhaust head stud repair kit for Porsche Air-cooled 911's
Never lose sleep again over a bent or broken exhaust stud on a 911 engine. This new tool is a must for every 911 mechanic and will pay for itself the first time you use it. This is a quick and totally accurate tool to repair and replace broken studs without damaging the head, or worse, having to remove the engine. The SR065 fixture indexes off of the exhaust port (by using one of the various sized port bushings included), secures to the opposite stud, and allows you to drill out, tap, and replace the stud dead on, every time. Includes LH drill bits, tap with extension, drill jigs/guides, port bushings, and a sturdy storage case.
Now includes our SR065D drill guide.
Fits ALL of the 911 heads including the 993.
Never lose sleep again over a bent or broken exhaust stud on a 911 engine. This new tool is a must for every 911 mechanic and will pay for itself the first time you use it. This is a quick and totally accurate tool to repair and replace broken studs without damaging the head, or worse, having to remove the engine. The SR065 fixture indexes off of the exhaust port (by using one of the various sized port bushings included), secures to the opposite stud, and allows you to drill out, tap, and replace the stud dead on, every time. Includes LH drill bits, tap with extension, drill jigs/guides, port bushings, and a sturdy storage case.
Now includes our SR065D drill guide.
Fits ALL of the 911 heads including the 993.
£351.12
当前 £333.56
库存
安全购物
12 个月保修
全球交付
保时捷 911 输入轴法兰螺母套筒
代码: SR252
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Information
保时捷 911 输入轴法兰螺母套筒
STOMSKI RACING 版本的套筒用于拆卸/安装 901/911（SR252）或 915/930（SR252A）变速器上的输入轴法兰螺母，允许您使用输入轴的任一端通过将其安装到工厂工具上（例如从轴的一档端安装 P256）或通过使用安装在虎钳中的离合器盘来固定输入轴。
此外，与工厂式长管插座不同，SR252 和 SR252A 不太容易偏离输入轴的中心线。高品质冲击级插座和硬化钢焊接件，表面为黑色氧化物涂层。
• SR252 适用于 901/911/914 变速器。
• SR252A 适用于 915/930 变速器。
每个单独出售。
STOMSKI RACING 版本的套筒用于拆卸/安装 901/911（SR252）或 915/930（SR252A）变速器上的输入轴法兰螺母，允许您使用输入轴的任一端通过将其安装到工厂工具上（例如从轴的一档端安装 P256）或通过使用安装在虎钳中的离合器盘来固定输入轴。
此外，与工厂式长管插座不同，SR252 和 SR252A 不太容易偏离输入轴的中心线。高品质冲击级插座和硬化钢焊接件，表面为黑色氧化物涂层。
• SR252 适用于 901/911/914 变速器。
• SR252A 适用于 915/930 变速器。
每个单独出售。
价格低至: £161.73
安全购物
12 个月保修
全球交付
Leak-down / compression adapter for Porsche 911
代码: SR03
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Leak-down / compression adapter for Porsche 911
You no longer need to fight or snake a flexible rubber hose blindly through the valve cover and into the cylinder head to hook up a compression or leak down gauge on the 911 engines (or other engines with remote spark plugs). Simply insert this unique tool into the spark plug hole of the cylinder head and attach your gauge. Precisely machined from high quality stainless steel or hard-coated aluminum.
Available in two sizes based on spark plug thread/diameter.
Sold separately.
You no longer need to fight or snake a flexible rubber hose blindly through the valve cover and into the cylinder head to hook up a compression or leak down gauge on the 911 engines (or other engines with remote spark plugs). Simply insert this unique tool into the spark plug hole of the cylinder head and attach your gauge. Precisely machined from high quality stainless steel or hard-coated aluminum.
Available in two sizes based on spark plug thread/diameter.
Sold separately.
价格低至: £69.31
安全购物
12 个月保修
全球交付
Mechanical chain tensioners, Set of 2 for Porsche 911
代码: SR011
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Mechanical chain tensioners, Set of 2 for Porsche 911
Use these specially designed and fabricated mechanical tensioners to set cam timing, or as a bullet-proof alternative to pressure fed or hydraulic tensioners for racing.
CNC machined from 6061 aluminum and anodized for protection, these will become an integral part of your tool box or race engine. Complete with tensioning bolts, locking nuts, and spacers.
Comes in a set of TWO.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR011
您正在查看的产品与这些编号存在交叉引用关系
Use these specially designed and fabricated mechanical tensioners to set cam timing, or as a bullet-proof alternative to pressure fed or hydraulic tensioners for racing.
CNC machined from 6061 aluminum and anodized for protection, these will become an integral part of your tool box or race engine. Complete with tensioning bolts, locking nuts, and spacers.
Comes in a set of TWO.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR011
93010505304
93010505803
93010591199
您正在查看的产品与这些编号存在交叉引用关系
£115.52
当前 £109.74
库存
安全购物
12 个月保修
全球交付
发动机和变速箱支架安装螺栓套件
代码: SR028
Information
发动机和变速箱支架安装螺栓套件
#斯托姆斯基#
终于找到一种优雅的方式将发动机固定到发动机轭架上。无需套筒、垫圈和加大螺母来弥补松弛。使用这些滚花螺母和适配器，可以将不同长度的箱体螺栓安装到轭架上。这些适配器为安装离合器留出了空间。采用硬涂层铝和不锈钢材质，经久耐用。
#斯托姆斯基#
终于找到一种优雅的方式将发动机固定到发动机轭架上。无需套筒、垫圈和加大螺母来弥补松弛。使用这些滚花螺母和适配器，可以将不同长度的箱体螺栓安装到轭架上。这些适配器为安装离合器留出了空间。采用硬涂层铝和不锈钢材质，经久耐用。
£65.36
当前 £62.09
库存
安全购物
12 个月保修
全球交付
保时捷 911 油冷却器测试仪
代码: SR009
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
保时捷 911 油冷却器测试仪
无需再为安装在 911 发动机上的机油冷却器猜测、疑惑或期盼。SR009 采用 6061 铝合金精密打造，让您轻松、快速、简便地检测冷却器是否泄漏。这款工具是所有冷却器（1965-1989 年）在重新安装前进行压力测试的必备工具。这款高品质工具经过阳极氧化处理，使用寿命长达多年，包含一个充满液体的压力表、美式嘴阀、密封件和配件。立即订购，避免冷却器泄漏带来的麻烦，也免去了为原本性能良好的发动机更换冷却器的麻烦。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR009
您正在查看的产品与这些编号存在交叉引用关系
无需再为安装在 911 发动机上的机油冷却器猜测、疑惑或期盼。SR009 采用 6061 铝合金精密打造，让您轻松、快速、简便地检测冷却器是否泄漏。这款工具是所有冷却器（1965-1989 年）在重新安装前进行压力测试的必备工具。这款高品质工具经过阳极氧化处理，使用寿命长达多年，包含一个充满液体的压力表、美式嘴阀、密封件和配件。立即订购，避免冷却器泄漏带来的麻烦，也免去了为原本性能良好的发动机更换冷却器的麻烦。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR009
90110704103
91110704102
您正在查看的产品与这些编号存在交叉引用关系
£148.96
当前 £141.51
库存
安全购物
12 个月保修
全球交付
Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997
代码: SR108
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 914 (1970-1976)
Information
Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997
Tolerance between the pressure relief plug and its galley are very close, and the slightest bit of gunk, corrosion, or bur will cause the plug to freeze up in the oil passage. A magnet is rarely powerful enough to overcome the seized plug, and leaving it in place is never an option.
Using STOMSKI RACING's Oil Pressure Relief Plug Extractor makes the task of removing the stuck plug a breeze, and allows you to ensure clean oil passages, and a properly operating bypass system.
The collet-based tool slides easily into the open end of the seized plug and a simple turn or two of the internal socket head cap screw expands the tool, grasping the plug to ensure easy removal.
Anodized Aluminum.
Tolerance between the pressure relief plug and its galley are very close, and the slightest bit of gunk, corrosion, or bur will cause the plug to freeze up in the oil passage. A magnet is rarely powerful enough to overcome the seized plug, and leaving it in place is never an option.
Using STOMSKI RACING's Oil Pressure Relief Plug Extractor makes the task of removing the stuck plug a breeze, and allows you to ensure clean oil passages, and a properly operating bypass system.
The collet-based tool slides easily into the open end of the seized plug and a simple turn or two of the internal socket head cap screw expands the tool, grasping the plug to ensure easy removal.
Anodized Aluminum.
£54.72
当前 £51.98
由供应商供货
安全购物
12 个月保修
全球交付
Oil return tube o-ring installer for Porsche 911
代码: SR027
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Oil return tube o-ring installer for Porsche 911
With this high-quality anodized aluminum tool, you will no longer have to worry about slicing the oil return tube O-rings or your fingers when installing these tight fitting seals. Simply insert the flanged end of the SR027 into the oil return tube, and slide the O-ring over the tapered end, sliding smoothly into place. No rips. No tears. No leaks.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR027
您正在查看的产品与这些编号存在交叉引用关系
With this high-quality anodized aluminum tool, you will no longer have to worry about slicing the oil return tube O-rings or your fingers when installing these tight fitting seals. Simply insert the flanged end of the SR027 into the oil return tube, and slide the O-ring over the tapered end, sliding smoothly into place. No rips. No tears. No leaks.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR027
93010704001
93010704001
93010704001
90110735101
90110735101
您正在查看的产品与这些编号存在交叉引用关系
£47.12
当前 £44.76
由供应商供货
安全购物
12 个月保修
全球交付
Precision shift coupler for Porsche 911 Gearbox type 901/911/912/915/930
代码: SR010
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
901/911/912/915/930 Precision shift coupler for Porsche 911
Our high quality, precisely engineered coupler ends sloppy shifting caused by worn (and even new!) factory couplers. Fabricated to exacting tolerances, the SR010 provides a precision feel and allows for accurate shifting. No more missed shifts during the heat of battle because of a sloppy factory coupler. The SR010 provides the precision and accuracy you demand when down shifting into that high-speed turn. No need to worry whether you are going to hit the wrong gear and over rev your engine. A quick bolt on replacement for the factory part. Shift with confidence, shift with precision. Available for 901/911/912/915/930.
Also available with our Shift Coupler Clamp (SR151) and/or shift bushing set (1 each of the Shift Tube Bushing and the Ball Cup Bushing).
For Installation Instructions please CLICK HERE
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR010
您正在查看的产品与这些编号存在交叉引用关系
Our high quality, precisely engineered coupler ends sloppy shifting caused by worn (and even new!) factory couplers. Fabricated to exacting tolerances, the SR010 provides a precision feel and allows for accurate shifting. No more missed shifts during the heat of battle because of a sloppy factory coupler. The SR010 provides the precision and accuracy you demand when down shifting into that high-speed turn. No need to worry whether you are going to hit the wrong gear and over rev your engine. A quick bolt on replacement for the factory part. Shift with confidence, shift with precision. Available for 901/911/912/915/930.
Also available with our Shift Coupler Clamp (SR151) and/or shift bushing set (1 each of the Shift Tube Bushing and the Ball Cup Bushing).
For Installation Instructions please CLICK HERE
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR010
91142402404
您正在查看的产品与这些编号存在交叉引用关系
£247.76
当前 £235.37
库存
安全购物
12 个月保修
全球交付
拆卸工具喷油器滤清器。保时捷 911 / 996 / 924S / 944 / 968
代码: 5167
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
拆卸工具喷油器过滤器。
#北环赛道#
适合：
保时捷 911
保时捷 996
保时捷 924S
保时捷 944
保时捷 968
描述：
使用此专用工具，可以快速、干净、有效地拆卸喷油器的过滤器。此外，该工具的头部有一个定心注射器，可以使用它将新过滤器直接压入喷嘴而不会倾斜。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
5167
您正在查看的产品与这些编号存在交叉引用关系
#北环赛道#
适合：
保时捷 911
保时捷 996
保时捷 924S
保时捷 944
保时捷 968
描述：
使用此专用工具，可以快速、干净、有效地拆卸喷油器的过滤器。此外，该工具的头部有一个定心注射器，可以使用它将新过滤器直接压入喷嘴而不会倾斜。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
5167
5167
您正在查看的产品与这些编号存在交叉引用关系
£20.00
当前 £19.00
库存
安全购物
12 个月保修
全球交付
Shift coupler clamp for Porsche 911
代码: SR151
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Shift coupler clamp for Porsche 911
CNC machined from aerospace alloy, our precision Shift Coupler Clamp ensures that your coupler stays where you set it. With extra clamping power ensured with our unique design, one-handed set-up, and anodized for great looks and protection, our Shift Coupler Clamp will provide that extra confidence you need.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR151
您正在查看的产品与这些编号存在交叉引用关系
CNC machined from aerospace alloy, our precision Shift Coupler Clamp ensures that your coupler stays where you set it. With extra clamping power ensured with our unique design, one-handed set-up, and anodized for great looks and protection, our Shift Coupler Clamp will provide that extra confidence you need.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
SR151
91442421400
您正在查看的产品与这些编号存在交叉引用关系
£47.12
当前 £44.76
库存
安全购物
12 个月保修
全球交付
适用于保时捷 911 的火花塞孔修理套件
代码: SR130
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
适用于保时捷 911 的火花塞孔修理套件
#斯托姆斯基#
911 头部的火花塞螺纹脱落通常意味着两种情况之一 - 维修不善或发动机故障无法正常维修。
到目前为止。
STOMSKI RACING 的新款 911 火花塞孔修复套件可让您精确地追踪受损头部的螺纹，或者在必要时通过安装 Time-Sert（或 Big-Sert）进行完全修复。我们新设计的数控夹具安装在两个气门盖螺栓上，当用随附的翼形螺钉锁定时，Time-Sert 铰刀、追踪器、丝锥和定位器可通过夹具的导管和定制丝锥驱动器精确对准 - 所有这些都在发动机仍在车内时进行。
有两种不同版本：
• SR130 与标准 M14x1.25 TimeSert 套件和插件（TS4412E 和 TS44111）一起使用；
• SR130BS 与 Big-Sert M14x1.25 超大插入套件和插入件 (TS5141E 和 TS51407) 一起使用。
我们还提供 Time-Sert/Big-Sert 14x1.25 套件和插件，以组成完整的包装。
#斯托姆斯基#
911 头部的火花塞螺纹脱落通常意味着两种情况之一 - 维修不善或发动机故障无法正常维修。
到目前为止。
STOMSKI RACING 的新款 911 火花塞孔修复套件可让您精确地追踪受损头部的螺纹，或者在必要时通过安装 Time-Sert（或 Big-Sert）进行完全修复。我们新设计的数控夹具安装在两个气门盖螺栓上，当用随附的翼形螺钉锁定时，Time-Sert 铰刀、追踪器、丝锥和定位器可通过夹具的导管和定制丝锥驱动器精确对准 - 所有这些都在发动机仍在车内时进行。
有两种不同版本：
• SR130 与标准 M14x1.25 TimeSert 套件和插件（TS4412E 和 TS44111）一起使用；
• SR130BS 与 Big-Sert M14x1.25 超大插入套件和插入件 (TS5141E 和 TS51407) 一起使用。
我们还提供 Time-Sert/Big-Sert 14x1.25 套件和插件，以组成完整的包装。
价格低至: £254.14
安全购物
12 个月保修
全球交付
也可在这些页面找到
您可能也喜欢
流行车型
