请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Category Filter
价格匹配保证
全球配送
12 个月保修
PAGID RBD 赛车制动盘
按车型类型筛选
产品车辆组
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
Information
Pagid RBD 耐力赛浮动前制动盘组件。
仅供赛道使用
适合：
保时捷 997 GT3 杯
比赛申请 -耐力赛
刹车盘直径 - 380mm
刹车盘厚度 - 32mm
前制动盘组件包括
• 前刹车盘
• 安装钟
• 线轴组
线轴和圆盘之间的浮动连接消除了硬质阳极氧化帽的磨损，因此可以重复使用多次。
通过连接圆盘的法兰上适当大小的开口，气流可以进入外部摩擦面。
专门设计的通风室，以优化盘片和冷却气流之间的热交换率。
表面处理（凹槽图案）与 Pagid Racing 刹车片相结合开发，以实现最佳的系统性能和磨损特性。
• 增强性能并延长光盘寿命
• 采用新的驱动系统，组装和操作更加容易
• 优化初始咬合
仅供赛道使用
适合：
保时捷 997 GT3 杯
比赛申请 -耐力赛
刹车盘直径 - 380mm
刹车盘厚度 - 32mm
前制动盘组件包括
• 前刹车盘
• 安装钟
• 线轴组
线轴和圆盘之间的浮动连接消除了硬质阳极氧化帽的磨损，因此可以重复使用多次。
通过连接圆盘的法兰上适当大小的开口，气流可以进入外部摩擦面。
专门设计的通风室，以优化盘片和冷却气流之间的热交换率。
表面处理（凹槽图案）与 Pagid Racing 刹车片相结合开发，以实现最佳的系统性能和磨损特性。
• 增强性能并延长光盘寿命
• 采用新的驱动系统，组装和操作更加容易
• 优化初始咬合
价格低至: €1,013.07
产品车辆组
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
Information
Pagid RBD endurance racing floating rear brake disc assembly.
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Race Application - Endurance
Brake Disc Diameter - 350mm
Brake Disc Thickness - 28mm
Rear brake disc assembly consists of
• Rear Brake Disc
• Mounting Bell
• Bobbin Set
The floating connection between bobbin and disc eliminates wear on the hard anodized hat so makes it reusable multiple times.
Airflow onto the outside friction face is achieved through the proper sized openings in the connection flange to the disc.
Specially designed ventilation chambers to optimize the thermal exchange rate between disc and cooling airflow.
The surface finish (groove pattern) has been developed in combination with Pagid Racing brake pads for best system performance and wear characteristics.
• Enhanced performance and extended disc life
• Easier assembly and handling due to new drive system
• Optimisation of the initial bite
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Race Application - Endurance
Brake Disc Diameter - 350mm
Brake Disc Thickness - 28mm
Rear brake disc assembly consists of
• Rear Brake Disc
• Mounting Bell
• Bobbin Set
The floating connection between bobbin and disc eliminates wear on the hard anodized hat so makes it reusable multiple times.
Airflow onto the outside friction face is achieved through the proper sized openings in the connection flange to the disc.
Specially designed ventilation chambers to optimize the thermal exchange rate between disc and cooling airflow.
The surface finish (groove pattern) has been developed in combination with Pagid Racing brake pads for best system performance and wear characteristics.
• Enhanced performance and extended disc life
• Easier assembly and handling due to new drive system
• Optimisation of the initial bite
价格低至: €1,013.07
Pagid RBD racing front brake disc bobbin set. Porsche 997 GT3 / 991 GT3 / Cayman GT4
代码: SA100100201
产品车辆组
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Information
Pagid RBD racing front brake disc bobbin set.
1 Set required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Porsche 991 GT3 Cup
Porsche 991 GT America
Porsche 981 GT4 Clubsport
Porsche 718 GT4 Clubsport
#Front#
Front brake disc bobbin set only
Brake disc and mounting bell purchased separately
Specification
Type - Bobbin
Flange thickness - 6.25
Quantity in Set - 10
Axle - Front
Dimension A - 11
Dimension B - 6.4
Dimension C - 9.45
Dimension D - 6.55
Pagid Racing's Bobin set provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
1 Set required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Porsche 991 GT3 Cup
Porsche 991 GT America
Porsche 981 GT4 Clubsport
Porsche 718 GT4 Clubsport
#Front#
Front brake disc bobbin set only
Brake disc and mounting bell purchased separately
Specification
Type - Bobbin
Flange thickness - 6.25
Quantity in Set - 10
Axle - Front
Dimension A - 11
Dimension B - 6.4
Dimension C - 9.45
Dimension D - 6.55
Pagid Racing's Bobin set provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
价格: €70.79
由供应商供货
产品车辆组
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
Information
Pagid RBD racing front brake disc mounting bell.
Sold individually - 2 required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Front brake disc mounting bell only
Brake disc and bobbins purchased separately
Specification
Type - Mounting Bell
Hat Interface PCD - 10 x 228,6
Inside Diameter - 103mm
Axle - Front
Stud bolt Circle - 5 x 130
Offset - 28mm
Face Thickness - 6.5mm
Pagid Racing's Mounting Bell provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
Sold individually - 2 required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Front brake disc mounting bell only
Brake disc and bobbins purchased separately
Specification
Type - Mounting Bell
Hat Interface PCD - 10 x 228,6
Inside Diameter - 103mm
Axle - Front
Stud bolt Circle - 5 x 130
Offset - 28mm
Face Thickness - 6.5mm
Pagid Racing's Mounting Bell provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
价格: €497.25
由供应商供货
产品车辆组
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Information
Pagid RBD racing rear brake disc bobbin set.
1 Set required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Porsche 991 GT3 Cup
Porsche 991 GT America
Porsche 981 GT4 Clubsport
Porsche 718 GT4 Clubsport
#Rear#
Rear brake disc bobbin set only
Brake disc and mounting bell purchased separately
Specification
Type - Bobbin
Flange thickness - 6.25
Quantity in Set - 12
Axle - Front
Dimension A - 11
Dimension B - 6.4
Dimension C - 9.45
Dimension D - 6.55
Pagid Racing's Bobin set provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
1 Set required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Porsche 991 GT3 Cup
Porsche 991 GT America
Porsche 981 GT4 Clubsport
Porsche 718 GT4 Clubsport
#Rear#
Rear brake disc bobbin set only
Brake disc and mounting bell purchased separately
Specification
Type - Bobbin
Flange thickness - 6.25
Quantity in Set - 12
Axle - Front
Dimension A - 11
Dimension B - 6.4
Dimension C - 9.45
Dimension D - 6.55
Pagid Racing's Bobin set provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
价格: €75.47
由供应商供货
产品车辆组
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
Information
Pagid RBD racing rear brake disc mounting bell.
Sold individually - 2 required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Rear brake disc mounting bell only
Brake disc and bobbins purchased separately
Specification
Type - Mounting Bell
Hat Interface PCD - 12 x 208
Inside Diameter - 103mm
Axle - Rear
Stud bolt Circle - 5 x 130
Offset - 38.8mm
Face Thickness - 6.5mm
Pagid Racing's Mounting Bell provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
Sold individually - 2 required per car
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Rear brake disc mounting bell only
Brake disc and bobbins purchased separately
Specification
Type - Mounting Bell
Hat Interface PCD - 12 x 208
Inside Diameter - 103mm
Axle - Rear
Stud bolt Circle - 5 x 130
Offset - 38.8mm
Face Thickness - 6.5mm
Pagid Racing's Mounting Bell provides the ideal solution for an uncompromising and highly efficient partnership between brake pad and brake disc.
Strict quality controls during a long development process result in a high performance racing brake disc, optimised for weight, cooling performance and crack resistance.
In conjunction with the brake pads, the products create a highly efficient brake team
价格: €452.79
由供应商供货
产品车辆组
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII GT3 2010-11
Information
Pagid RBD sprint racing floating front brake disc.
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Front brake disc only
Mounting bell and bobbins purchased separately
Race Application - Sprint
Brake Disc Diameter - 380mm
Brake Disc Thickness - 32mm
Inside Diameter - 250mm
Hat Interface PCD - 10 x 228,6
Maximum Pad Depth - 65mm
Vent Opening - 17mm
The floating connection between bobbin and disc eliminates wear on the hard anodized hat so makes it reusable multiple times.
Airflow onto the outside friction face is achieved through the proper sized openings in the connection flange to the disc.
Specially designed ventilation chambers to optimize the thermal exchange rate between disc and cooling airflow.
The surface finish (groove pattern) has been developed in combination with Pagid Racing brake pads for best system performance and wear characteristics.
• Enhanced performance and extended disc life
• Easier assembly and handling due to new drive system
• Optimisation of the initial bite
For Race Track Use Only
Fits:
Porsche 997 GT3 Cup
Front brake disc only
Mounting bell and bobbins purchased separately
Race Application - Sprint
Brake Disc Diameter - 380mm
Brake Disc Thickness - 32mm
Inside Diameter - 250mm
Hat Interface PCD - 10 x 228,6
Maximum Pad Depth - 65mm
Vent Opening - 17mm
The floating connection between bobbin and disc eliminates wear on the hard anodized hat so makes it reusable multiple times.
Airflow onto the outside friction face is achieved through the proper sized openings in the connection flange to the disc.
Specially designed ventilation chambers to optimize the thermal exchange rate between disc and cooling airflow.
The surface finish (groove pattern) has been developed in combination with Pagid Racing brake pads for best system performance and wear characteristics.
• Enhanced performance and extended disc life
• Easier assembly and handling due to new drive system
• Optimisation of the initial bite
价格低至: €583.25
显示从1到7（共7个产品）
关于PAGID RBD 赛车制动盘
PAGID RBD 赛车级刹车盘 - 赛车级制动性能和热稳定性
PAGID RBD 赛车刹车盘专为极限赛车运动和高性能驾驶而设计，即使在持续高负荷条件下，也能提供卓越的热稳定性、稳定的摩擦性能和精准的制动控制。PAGID RBD 刹车盘专为赛道、比赛和竞技用途而开发，旨在承受现代赛车运动环境中遇到的高温、高压和制动力。
在 Design911，我们的 PAGID RBD Racing 刹车盘系列采用优质材料、先进的冶金技术和经过赛车验证的设计特点，确保在激烈驾驶时实现可预测的制动性能、减少热衰减并延长使用寿命。
PAGID RBD 赛车刹车盘有哪些功能？
PAGID RBD 刹车盘与高性能刹车片配合使用，在极端条件下将动能转化为可控的制动力。
核心功能：
- 在高温下提供稳定、一致的制动性能。
- 在反复重制动过程中保持摩擦效率。
- 有效散热以减少刹车衰减。
- 支持精准的踏板脚感和调节。
- 能够承受赛道、比赛和高性能驾驶带来的高负荷。
这些刹车盘的设计旨在确保其在长时间使用和反复热循环中都能可靠运行。
赛车刹车盘为何会磨损或失效？
赛车制动系统在热能和机械性能的极限范围内运行。
常见的磨损或故障原因包括：
- 极端的热循环会导致开裂或变形。
- 表面温度过高会导致材料疲劳。
- 腐蚀性强的刹车片配方会加速刹车盘磨损。
- 热量分布不均导致抖动或振动。
- 反复重刹会逐渐磨损刹车盘厚度。
随着刹车盘磨损或性能下降，制动一致性和安全性会受到影响——尤其是在赛道和比赛环境中。
为什么要更换为 PAGID RBD 赛车刹车盘？
用 PAGID RBD Racing 刹车盘替换磨损的刹车盘，可以恢复制动性能，并确保在严苛条件下的稳定性。
主要优势：
- 采用赛车级材料，具有极强的耐热性。
- 圈速始终保持稳定的制动性能。
- 持续高速制动时热衰减减少。
- 与标准公路碟刹相比，耐用性更强。
- 专为与PAGID Racing刹车片配方完美搭配而设计。
- 非常适合赛道日、耐力赛和竞技赛车运动。
升级到 PAGID RBD 制动盘可确保在制动性能至关重要时，拥有信心、控制力和可靠性。
精彩片段
- 赛车规格的赛车刹车盘。
- 专为极端温度稳定性而设计。
- 具有极高的抗裂纹、抗变形和抗褪色性能。
- 专为赛道和比赛用途而设计。
- 兼容PAGID Racing刹车片。
- 深受专业赛车队的信赖。
您可能也喜欢
流行车型
