Price Match Guarantee
Worldwide Delivery
12 Month Warranty
Powerflex Black Series Bushes
Refine by Car Type
Anti Roll Bar Polyurethane Bushes 20mm for Porsche 911 / 924 / 944 / 964 / 993 Powerflex Black Series
Code: PFF57-209-20BLK
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
Information
Powerflex Black Series Anti Roll Bar Bushes Rear POLYURETHANE
Size: 20mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313C
Fits:
Porsche 911 SC 1974-83 Front axle
Porsche 911 TURBO 1985-88 Rear axle
Porsche 924 1976-77 Front axle
Porsche 924S 1986-88 Rear axle Cars with Sport Suspension
Porsche 944 1982-85 Front axle
Porsche 944 1985-88 Rear axle - Please choose by size
Porsche 964 1991-94 C2/C4 Rear axle Cars with manual transmission - Please choose by size
Porsche 993 C2S/C4S/RS Rear axle Cars with Sport Suspension - Please choose by size
Click 'Zoom in' to see parts diagram.
Diagram Ref No 17.
Pack of 2. Two bushes per car.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-209-20BLK
The product you are viewing cross references to these numbers
Size: 20mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313C
Fits:
Porsche 911 SC 1974-83 Front axle
Porsche 911 TURBO 1985-88 Rear axle
Porsche 924 1976-77 Front axle
Porsche 924S 1986-88 Rear axle Cars with Sport Suspension
Porsche 944 1982-85 Front axle
Porsche 944 1985-88 Rear axle - Please choose by size
Porsche 964 1991-94 C2/C4 Rear axle Cars with manual transmission - Please choose by size
Porsche 993 C2S/C4S/RS Rear axle Cars with Sport Suspension - Please choose by size
Click 'Zoom in' to see parts diagram.
Diagram Ref No 17.
Pack of 2. Two bushes per car.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-209-20BLK
PFF57209-20
PFF57-209-20BLK
477411313C
The product you are viewing cross references to these numbers
€50.81
Now €48.27
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Drop link bushes, Rear. Porsche 924 / 944 / 968 Powerflex Black Series
Code: PFR57-211BLK
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Powerflex Black Series Drop link bushes, Rear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-211BLK
The product you are viewing cross references to these numbers
Sold as 4 bushes (both rear drop links, these are replacement bushes the drop links are not included)
OEM Part Number: 477511051A
SET OF 4. 
Fits:
Porsche 924 and S (all years)
Porsche 944 (1982 - 1985)
Porsche 944 inc S2 & Turbo (1985 - 1991)
Porsche 968 (1992-1995)
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 35
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-211BLK
PFR57-211
477511051A
The product you are viewing cross references to these numbers
€132.57
Now €125.94
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Drop Link Polyurethane Bush for Porsche 944 Front Powerflex Black Series
Code: PFF57-205-16BLK
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
Information
Powerflex Black Series Stabilizer Bar Bushes PFF57-205-16BLK
FRONT
Quantity: 2
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 20mm, 21.5mm, 23mm & 24mm anti roll bars. The bar diameter reduces at the end to 16.45mm where 95134379300PF fits.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Fits:
Porsche 944 1985-86 ALL Front
Porsche 944 1987-91 Front Cars with standard chassis (Not Turbo etc)
Please note price shown is for quantity 2.
Click 'Zoom in' to display fitment diagram - Ref No 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-205-16BLK
The product you are viewing cross references to these numbers
FRONT
Quantity: 2
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 20mm, 21.5mm, 23mm & 24mm anti roll bars. The bar diameter reduces at the end to 16.45mm where 95134379300PF fits.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Fits:
Porsche 944 1985-86 ALL Front
Porsche 944 1987-91 Front Cars with standard chassis (Not Turbo etc)
Please note price shown is for quantity 2.
Click 'Zoom in' to display fitment diagram - Ref No 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-205-16BLK
PFF57-205-16
PFF5720516
PFF57205
95134379300
The product you are viewing cross references to these numbers
€47.96
Now €45.56
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Drop Link Polyurethane Bush for Porsche 944 Turbo / 968 Front Powerflex Black Series
Code: PFF57-206BLK
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Powerflex Black Series Stabilizer Bar Bushes PFF57-206BLK
FRONT
Quantity: 2
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 25.5mm or 26.8mm anti roll bars. The bar diameter reduces at the end to 18mm where 95134379330PF fits.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Fits:
Porsche 944 1987-91 Turbo Front
Porsche 944 Turbo S 1988 Front
Porsche 968 1992-95 Front Cars with standard suspension not M030 cars
Please note price shown for Polyurethane bushes is for Quantity 2.
Click 'Zoom in' to display fitment diagram - Ref No 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-206BLK
The product you are viewing cross references to these numbers
FRONT
Quantity: 2
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 25.5mm or 26.8mm anti roll bars. The bar diameter reduces at the end to 18mm where 95134379330PF fits.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Fits:
Porsche 944 1987-91 Turbo Front
Porsche 944 Turbo S 1988 Front
Porsche 968 1992-95 Front Cars with standard suspension not M030 cars
Please note price shown for Polyurethane bushes is for Quantity 2.
Click 'Zoom in' to display fitment diagram - Ref No 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-206BLK
PFF57-206
PFF57206
95134379330
PFF57-206BLK
The product you are viewing cross references to these numbers
€47.96
Now €45.56
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Drop Link Top Polyurethane Bush Front for Porsche 944 / 968 Powerflex Black Series
Code: PFF57-210BLK
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
PowerFlex Black Series Front Drop Link Top Bushes.
Quantity per pack: 4 bushes, 4 washers, 2 lock nuts.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 944 1985-91 ALL Front
Porsche 968 1992-95 ALL Front
Click 'Zoom in' to display fitment diagram - Ref No 5, 8, 10.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-210BLK
The product you are viewing cross references to these numbers
Quantity per pack: 4 bushes, 4 washers, 2 lock nuts.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 944 1985-91 ALL Front
Porsche 968 1992-95 ALL Front
Click 'Zoom in' to display fitment diagram - Ref No 5, 8, 10.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-210BLK
95134379501
PFF57-210
477411043
PFF57-210BLK
N90087601
The product you are viewing cross references to these numbers
€47.48
Now €45.11
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Anti-Roll Bar Bush (Polyurethane) - 20mm - for Porsche 924 / 924 Turbo / 924 S / 944. Powerflex Black Series
Code: PFF57-306-20BLK
Vehicle Group
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Information
Upgrade your worn-out rubber anti-roll bar bushes with Powerflex's high-performance polyurethane alternatives. Sold in pairs, these 20mm bushes deliver enhanced handling, improved performance, and greater durability.
This round bush has a 40mm outer diameter and an overall length of 55mm. These 20mm bushes directly replace Porsche part numbers 477411053G and 477411053R.
Porsche 924 1982*
Porsche 924 1983-85
Porsche 924 Turbo 1982*
Porsche 924 Turbo 1983-85
Porsche 924 S 1986-88 - Vehicles Without Sports Suspension (PR 030)
Porsche 944-1 1982-85 - Vehicles Without Rear Anti-Roll Bar (PR 404)
Porsche 944-2 1985-86 - Vehicles Without Sports Suspension (PR 030)
Diagram ref. 3.
*NOTE: Porsche updated the 924's front anti-roll bar design during the 1982 model year. If your 1982 Porsche 924 has a VIN from F 92-CN402 198 onward (or F 92-CN450 832 onward for North America), it will be compatible.
For 1982 Porsche 924 Turbo models, compatibility starts from F 93-CN100 306 onward (or F 93-CN150 332 onward for North American and Japanese models). Please ensure you check your VIN to confirm fitment. If you're unsure, please do not hesitate to contact us with your vehicle's VIN number for confirmation.
Additionally, due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
The Powerflex Range:
Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Powerflex Materials:
The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-306-20BLK
The product you are viewing cross references to these numbers
This round bush has a 40mm outer diameter and an overall length of 55mm. These 20mm bushes directly replace Porsche part numbers 477411053G and 477411053R.
Porsche 924 1982*
Porsche 924 1983-85
Porsche 924 Turbo 1982*
Porsche 924 Turbo 1983-85
Porsche 924 S 1986-88 - Vehicles Without Sports Suspension (PR 030)
Porsche 944-1 1982-85 - Vehicles Without Rear Anti-Roll Bar (PR 404)
Porsche 944-2 1985-86 - Vehicles Without Sports Suspension (PR 030)
Diagram ref. 3.
*NOTE: Porsche updated the 924's front anti-roll bar design during the 1982 model year. If your 1982 Porsche 924 has a VIN from F 92-CN402 198 onward (or F 92-CN450 832 onward for North America), it will be compatible.
For 1982 Porsche 924 Turbo models, compatibility starts from F 93-CN100 306 onward (or F 93-CN150 332 onward for North American and Japanese models). Please ensure you check your VIN to confirm fitment. If you're unsure, please do not hesitate to contact us with your vehicle's VIN number for confirmation.
Additionally, due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
The Powerflex Range:
Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Powerflex Materials:
The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.
Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.
Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-306-20BLK
477411053G
477411053R
The product you are viewing cross references to these numbers
€52.12
Now €49.51
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Anti-Roll Bar Bush (Polyurethane) - 23mm - for Porsche 924 / 924S / 924 Turbo / 944. Powerflex Black Series
Code: PFF57-306-23BLK
Vehicle Group
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Information
Upgrade your worn-out rubber anti-roll bar bushes with Powerflex's high-performance polyurethane alternatives. Sold in pairs, these 23mm bushes deliver enhanced handling, improved performance, and greater durability.
This round bush has a 40mm outer diameter and an overall length of 55mm. These 23mm bushes directly replace Porsche part number 477411053J.
Porsche 924 1982* - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 1983-85 - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 Turbo 1982* - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 Turbo 1983-85 - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 S 1986-88 - Vehicles With Sports Suspension (PR 030)
Porsche 944-1 1984-85 - Vehicles With Rear Anti-Roll Bar (PR 404)
Porsche 944-2 1985-86 - Vehicles With Rear Anti-Roll Bar / Sports Suspension (PR 030/PR 404)
*NOTE: Porsche updated the 924's front anti-roll bar design during the 1982 model year. If your 1982 Porsche 924 has a VIN from F 92-CN402 198 onward (or F 92-CN450 832 onward for North America), it will be compatible.
For 1982 Porsche 924 Turbo models, compatibility starts from F 93-CN100 306 onward (or F 93-CN150 332 onward for North American and Japanese models). Please ensure you check your VIN to confirm fitment. If you're unsure, please do not hesitate to contact us with your vehicle's VIN number for confirmation.
Additionally, due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
Diagram ref. 3.
*NOTE: Due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
The Powerflex Range:
Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Powerflex Materials:
The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-306-23BLK
The product you are viewing cross references to these numbers
This round bush has a 40mm outer diameter and an overall length of 55mm. These 23mm bushes directly replace Porsche part number 477411053J.
Porsche 924 1982* - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 1983-85 - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 Turbo 1982* - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 Turbo 1983-85 - For Models With 23mm Aftermarket Anti-Roll Bar
Porsche 924 S 1986-88 - Vehicles With Sports Suspension (PR 030)
Porsche 944-1 1984-85 - Vehicles With Rear Anti-Roll Bar (PR 404)
Porsche 944-2 1985-86 - Vehicles With Rear Anti-Roll Bar / Sports Suspension (PR 030/PR 404)
*NOTE: Porsche updated the 924's front anti-roll bar design during the 1982 model year. If your 1982 Porsche 924 has a VIN from F 92-CN402 198 onward (or F 92-CN450 832 onward for North America), it will be compatible.
For 1982 Porsche 924 Turbo models, compatibility starts from F 93-CN100 306 onward (or F 93-CN150 332 onward for North American and Japanese models). Please ensure you check your VIN to confirm fitment. If you're unsure, please do not hesitate to contact us with your vehicle's VIN number for confirmation.
Additionally, due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
Diagram ref. 3.
*NOTE: Due to the vehicle's age and some ambiguity in the official catalogue, we highly recommend measuring your anti-roll bar before ordering to ensure you select the correct size.
The Powerflex Range:
Road Series (Road & Fast Road) - POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series (Track & Motorsport) - POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection (Classic & Restoration Use) - POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Powerflex Materials:
The materials used by Powerflex are colour coded to make them easily identifiable. Below explains the shore rating and their common uses.
Red 65A – Used for our Universal exhaust mounts and diesel engine mounts.
Yellow 70A – Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.
Purple 80A – Our most common material. This is used in most areas of the suspension and provides the right mix between performance and compliance.
Black 95A – Our hardest material. This is used mostly for our Black Series range or in our Road Series where the vehicle’s standard suspension demands require us to use this hardness of material i.e. in areas of high load.
Grey* - Used specifically for our Heritage Collection. This can be any of the durometers mentioned but will always be the same as the equivalent part from our Road Series i.e. if it’s Purple 80A in our Road Series, it’d be Grey 80A in our Heritage Collection. On our Road Series and Heritage Collection kits, we can use a mix of all 4 of our materials. During the development stages, we test the original bush and see what the requirements are for strength and movement. At that point, we then decide which of our materials would be best suited. We don’t believe in a one material suits all rule. Manufacturers will do the same and will use different shore rubbers, however, it’s not as noticeable as all rubber bushes look visually similar.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-306-23BLK
477411053J
The product you are viewing cross references to these numbers
€52.12
Now €49.51
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Anti-Roll Bar to Wishbone Bush - Set of 2. Porsche 924 & S / 944
Code: PFF57-307BLK
Vehicle Group
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Information
Replacement bushes for the aluminium bracket which connects the front anti-roll bar to the wishbone.
Diagram ref. 6
Price is for a set of two.
Fits:
Porsche 924 1982-85*
Porsche 924S 1986-88
Porsche 944 1982-85
*Please Be Advised: Porsche revised the front suspension for the 924 in 1982. The VIN split can be found below, but it is fairly simple to perform a visual check - please see the product images. This product is intended for the later-style suspension setup, which uses an aluminium bracket to connect the anti-roll bar to the front wishbone. The part number for this bracket is 94434373500 (LEFT) and 94434373600 (RIGHT).
VIN SPLIT:
F92-CN402 198 Onwards (924)
F92-CN450 832 Onwards (US/Canadian 924 Models)
F93-CN100 306 Onwards (Turbo)
F93-CN150 332 Onwards (US/Canadian/Japanese 924 Turbo Models)
Powerflex's Range...
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-307BLK
The product you are viewing cross references to these numbers
Diagram ref. 6
Price is for a set of two.
Fits:
Porsche 924 1982-85*
Porsche 924S 1986-88
Porsche 944 1982-85
*Please Be Advised: Porsche revised the front suspension for the 924 in 1982. The VIN split can be found below, but it is fairly simple to perform a visual check - please see the product images. This product is intended for the later-style suspension setup, which uses an aluminium bracket to connect the anti-roll bar to the front wishbone. The part number for this bracket is 94434373500 (LEFT) and 94434373600 (RIGHT).
VIN SPLIT:
F92-CN402 198 Onwards (924)
F92-CN450 832 Onwards (US/Canadian 924 Models)
F93-CN100 306 Onwards (Turbo)
F93-CN150 332 Onwards (US/Canadian/Japanese 924 Turbo Models)
Powerflex's Range...
Road Series – for Road and fast Road use.
POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, and Greater cost-effectiveness.
Black Series – for Track and Motorsport use.
POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material. If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Heritage Collection – for Classic and Restoration use.
POWERFLEX Heritage Collection bushes are manufactured using modern-day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with’ the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex’s unique blend of polyurethane. Going a step further than simply using the same material and durometer of hardness for all of our parts, each part location has its own shore designation to ensure improved suspension performance without discomfort or vibration, all of which ship in our new ‘Classic’ Dark Grey colour suitable for all road-based applications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-307BLK
171411314A
94434373500
94434373600
94434373501
94434373601
The product you are viewing cross references to these numbers
€54.98
Now €52.23
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Lower Wishbone Front Bush Porsche 944 Powerflex Black Series
Code: PFF57-101BLK::1
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
Information
PowerFlex Front Wishbone Inner Front Bush.
Set of 2 for both wishbones
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits:
Porsche 944 1985-91 Alloy wishbone
Fits to No 2 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-101BLK
The product you are viewing cross references to these numbers
Set of 2 for both wishbones
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits:
Porsche 944 1985-91 Alloy wishbone
Fits to No 2 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-101BLK
PFF57101
95134102700
95134102800
94434102702
94434192731
94434102802
94434192831
94434192731
94434192831
The product you are viewing cross references to these numbers
€105.32
Now €100.05
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Wishbone Bush Rear Porsche 924S / 944 Powerflex Black Series
Code: PFF85-213BLK
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Information
Powerflex Black Series Wishbone Inner Bush Rear
PAIR
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85
Diagram Ref No 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF85-213BLK
The product you are viewing cross references to these numbers
PAIR
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85
Diagram Ref No 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF85-213BLK
477407181A
PFF85-213
PFF85-213BLK
The product you are viewing cross references to these numbers
€67.71
Now €64.32
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Front Wishbone Rear Bush. Porsche 944 PowerFlex Black Series
Code: PFF57-303BLK
Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
Information
PowerFlex Black Series Front wischbone rear bush.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits:
Porsche 944 1986>>
Fits to No 10 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-303BLK
The product you are viewing cross references to these numbers
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits:
Porsche 944 1986>>
Fits to No 10 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-303BLK
95134102300
95134102301
PFF57-303BLK
The product you are viewing cross references to these numbers
€97.46
Now €92.59
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Alxe Bearing Flange Outer Mounting Bush. Porsche 924 / 944 / 968 Powerflex Black Series
Code: PFR57-220BLK
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Powerflex Black Series PFR57-220BLK
Rear Alxe Carrier Outer Mounting Bush.
SET OF2. Replacement for Porsche parts No. 477501069A
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-88
Porsche 944 1986-91
Porsche 968 1992-95
Diagram Ref no 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-220BLK
The product you are viewing cross references to these numbers
Rear Alxe Carrier Outer Mounting Bush.
SET OF2. Replacement for Porsche parts No. 477501069A
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-88
Porsche 944 1986-91
Porsche 968 1992-95
Diagram Ref no 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-220BLK
PFR57-220
477501069A
94433105900
94433106000
The product you are viewing cross references to these numbers
€94.96
Now €90.21
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Anti Roll Bar Polyurethane Bushes 18mm. Porsche 911 / 944 / 964 / 968 / 993 Powerflex Black Series
Code: PFF57-209-18BLK
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
Information
Powerflex Black Series Stabilizer Bar Bushes Rear POLYURETHANE
Size: 18mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Refference to: 477411313B
Fits:
Porsche 911 1978-85 Rear axle
Porsche 911 TURBO 1978-85 Rear axle
Porsche 911 TURBO 1989 Rear axle
Porsche 944 1985-91 Rear axle Please choose by size
Porsche 964 RS Rear axle
Porsche 964 C4 Rear axle Please choose by size
Porsche 968 Rear axle Cars with Sport Suspension & tiptronic transmission
Porsche 993 C2/C4 Rear axle Cars with standard suspension
Porsche 993 C2S/C4S Rear axle Cars with Sport Suspension - Please choose by size
Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.
Pack of 2. Two bushes per car
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-209-18BLK
The product you are viewing cross references to these numbers
Size: 18mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Refference to: 477411313B
Fits:
Porsche 911 1978-85 Rear axle
Porsche 911 TURBO 1978-85 Rear axle
Porsche 911 TURBO 1989 Rear axle
Porsche 944 1985-91 Rear axle Please choose by size
Porsche 964 RS Rear axle
Porsche 964 C4 Rear axle Please choose by size
Porsche 968 Rear axle Cars with Sport Suspension & tiptronic transmission
Porsche 993 C2/C4 Rear axle Cars with standard suspension
Porsche 993 C2S/C4S Rear axle Cars with Sport Suspension - Please choose by size
Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.
Pack of 2. Two bushes per car
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-209-18BLK
PFF57209-18
PFF5720918
477411313B
477411313N
The product you are viewing cross references to these numbers
€50.81
Now €48.27
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Pivot Strut To Tube Bushes. Porsche 944 / 968 Powerflex Black Series
Code: PFR57-223BLK
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
SET OF 4 BUSHES (for both sides)
The original bushes are only available from Porsche bonded to the metal work of the 'strut' costing £400.00 per side! The Powerflex bushes are priced at a fraction of the cost which is helped by us utilising the original metal work.
Fits:
Porsche 924 S
Porsche 944 1985 Onwards
Porsche 968 1992-95
If you still have the original strut bushes on your 944/2 or 968 they will be worn causing rear geometry changes and stability issues. By fitting our new polyurethane bushes this will offer a solution plus improved stability.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits to No 22 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-223BLK
The product you are viewing cross references to these numbers
The original bushes are only available from Porsche bonded to the metal work of the 'strut' costing £400.00 per side! The Powerflex bushes are priced at a fraction of the cost which is helped by us utilising the original metal work.
Fits:
Porsche 924 S
Porsche 944 1985 Onwards
Porsche 968 1992-95
If you still have the original strut bushes on your 944/2 or 968 they will be worn causing rear geometry changes and stability issues. By fitting our new polyurethane bushes this will offer a solution plus improved stability.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits to No 22 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-223BLK
PFF57-223
95133302100
The product you are viewing cross references to these numbers
€98.89
Now €93.95
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Rear Trailing Arm Bush. Porsche 924/ 944 / 968 Powerflex Black Series
Code: PFR57-222BLK
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Powerflex Black Series Rear Trailing Arm Bush.
SET OF 2
Replacement for Porsche parts No. 477501541
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95
Fits into the end of Diagram Ref no 4.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-222BLK
The product you are viewing cross references to these numbers
SET OF 2
Replacement for Porsche parts No. 477501541
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95
Fits into the end of Diagram Ref no 4.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-222BLK
PFR57-222
PFR57-222
477504541
PCG501541
94433102100
94433102200
95133102101
95133102201
951331021
951331022
The product you are viewing cross references to these numbers
€88.54
Now €84.11
Orderable
Shop Securely
12 Month Warranty
Worldwide Delivery
Wishbone Inner Bush Front. Porsche 924S / 944 Powerflex Black Series
Code: PFF85-211BLK
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Information
Powerflex Black Series Wishbone Inner Bush Front
PAIR
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85
Diagram Ref No 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF85-211BLK
The product you are viewing cross references to these numbers
PAIR
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-85
Diagram Ref No 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF85-211BLK
PFF85-211
171407182D
PFF85-211BLK
The product you are viewing cross references to these numbers
€73.42
Now €69.75
In stock
Shop Securely
12 Month Warranty
Worldwide Delivery
DISPLAYING 1 to 16 (of 16 products)
About Powerflex Black Series Bushes
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
You may also like
-
Strut Brace
-
Anti Roll Sway Bar
-
Lowering Springs
-
Control Arms Front
-
Control Arms Rear
-
Drop links Front
-
Drop links Rear
-
Top mounts Front
-
Steering Track Rods
-
Spring plates
-
Ball Joints
-
A-Frame Wishbone
-
Torsion Bars
-
Rear Sub Frame
-
DesignTek Coilover Suspension Kit
-
Bilstein SPORT B6 Dampers
-
Koni Sports
-
Superpro Polyurethane Bushes
-
Powerflex Polyurethane Bushes
-
Powerflex Heritage Collection
-
Spax Suspension
-
H&R Adjustable Suspension Kits
-
KW Variant 3 Adjustable Suspension kits
-
KW Clubsport Coilover Suspension Kits
-
KW Clubsport Coilover Suspension Kits WITH Top Mounts
-
KW Racing Kits
-
KYB Suspension
Popular Models
