请稍候…
我们正在处理您的订单,请稍候
请不要按返回按钮…
请不要按返回按钮…
Sub5Club Store
https://www.pitp.club
https://www.pitp.club
https://www.pitp.club
在此输入您的增值税号,然后单击验证:
您的详细信息已经过验证。增值税号注册至:
,
。
现在,您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利,并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分,因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息,我们将在您提出订单请求后应用增值税折扣。
Category Filter
保时捷
>
991 (911) MK1 2012-2016
>
991.1 GT3 3.8L (475 Bhp) 2014-16
>
外观造型/扰流板
>
前扰流板/保险杠
>
前保险杠插入碳纤维。保时捷 992 GT3 ❭ 1016.992.01
相关产品
产品车辆组
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
Information
Front end conversion from 991.1 to 991.1 GT3 RS
Material: Fibreglass
Parts included:
- front bumper
- front bonnet
- front wings
All ancillary parts like lights, vents, grilles, inserts are not included. Available separately.
Please note some small modifications may be required and we recommend this bodykit to be fitted by specialist bodyshop with skilled fibreglass fitters and auto electrician on site.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BODYKIT12
您正在查看的产品与这些编号存在交叉引用关系
Material: Fibreglass
Parts included:
- front bumper
- front bonnet
- front wings
All ancillary parts like lights, vents, grilles, inserts are not included. Available separately.
Please note some small modifications may be required and we recommend this bodykit to be fitted by specialist bodyshop with skilled fibreglass fitters and auto electrician on site.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BODYKIT12
99150303X95
99150519192
99151101195GRV
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
1 x 玻璃纤维前盖。保时捷 991.1 GT3 RS (99151101195GRV/1
1 x 带扰流板的前保险杠。保时捷 991.1 GT3 RS (99150519192/1
1 x 前翼组。保时捷 991.1 GT3 RS (99150303X95
价格: €5,403.35
由供应商供货
产品车辆组
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
Information
前裙板/前扰流唇适用于 2011 年 12 月 - 2017 年 1 月保时捷 991 车型
适用于 GT3 车型/车身变体
• 包括组装说明
• 前扰流唇采用创新的高品质材料 Fiberflex 制成。这种新型复合材料的优点:极高的柔韧性与出色的稳定性、抗碎性和不易燃性相结合。极高的生产质量和低重量甚至使其可用于专业赛车。独特的黑色表面具有良好的加工选项,可确保专业效果。
• 均匀的表面结构使喷漆无需大量的准备工作(产品未上漆)
• 材料灵活
请注意:这是特殊订单商品,可能需要 8-12 周才能交付,并且一旦订购就无法取消。
适用于 GT3 车型/车身变体
• 包括组装说明
• 前扰流唇采用创新的高品质材料 Fiberflex 制成。这种新型复合材料的优点:极高的柔韧性与出色的稳定性、抗碎性和不易燃性相结合。极高的生产质量和低重量甚至使其可用于专业赛车。独特的黑色表面具有良好的加工选项,可确保专业效果。
• 均匀的表面结构使喷漆无需大量的准备工作(产品未上漆)
• 材料灵活
请注意:这是特殊订单商品,可能需要 8-12 周才能交付,并且一旦订购就无法取消。
价格: €172.94
库存
产品车辆组
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
Information
Carbon fibre front bumper dive plane kit.
Available in Gloss or Matte Carbon Fibre

Fits
Porsche 991.1 GT3 / GT3 RS - 2012 to 2016
The Dive Planes for the Porsche 991.1 GT3/GT3RS were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.
Depending on driver preference, no rear aero is needed to balance out these units. We have seen up to 0.7 second gains due to increased front end grip at high speed corners which allows improved corner speed. If as a driver you feel the car needs more rear stability, we would not suggest these units without adding a rear aerodynamic device.
The units were designed in CAD using scan data and optimized using CFD within ANSYS Fluent.
These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon in both a matte and gloss clear coat.
Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.
Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template
Available in Gloss or Matte Carbon Fibre

Fits
Porsche 991.1 GT3 / GT3 RS - 2012 to 2016
The Dive Planes for the Porsche 991.1 GT3/GT3RS were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.
Depending on driver preference, no rear aero is needed to balance out these units. We have seen up to 0.7 second gains due to increased front end grip at high speed corners which allows improved corner speed. If as a driver you feel the car needs more rear stability, we would not suggest these units without adding a rear aerodynamic device.
The units were designed in CAD using scan data and optimized using CFD within ANSYS Fluent.
These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon in both a matte and gloss clear coat.
Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.
Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template
Choose Carbon Finish
价格低至: €1,280.57
价格匹配保证
全球配送
12 个月保修