请稍候… 
我们正在处理您的订单，请稍候
请不要按返回按钮…
请不要按返回按钮…
在此输入您的增值税号，然后单击验证：
您的详细信息已经过验证。增值税号注册至：
,
。
现在，您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利，并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分，因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息，我们将在您提出订单请求后应用增值税折扣。
Category Filter
适用于配备降低型悬架的保时捷车型的可调式推力臂衬套下控制臂套件。 - 356
356
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Information
适用于保时捷车型的RSS下控制臂套件。
类型：无可调推力臂衬套
RSS Tarmac系列赛车下控制臂专为配备行程缩短的减震器/避震器（例如PASM或M030选装件）的降低车身车辆而设计。此外，如果车辆配备了高质量的改装或赛车级绞牙避震套件，例如Bilstein PSS10、KW V3或Ohlins等，也同样适用。
下控制臂与“基本型悬架”（长行程支柱/减震器）或“带有降低弹簧的基本型支柱/减震器”不兼容。
注意：请勿安装在配备基本型减震器/支柱的车辆上，否则当减震器/支柱完全伸展或完全下降时，可能会导致悬架卡滞，从而造成不安全的驾驶状况。
价格：一套两个控制臂，另加 2 个 1mm/2mm/3mm/7mm 垫片。
RSS Tarmac系列控制臂采用6061航空级铝坯制造，从而具有更均匀的分子结构。
与铸造的赛车用臂相比，该臂的每个连接点都经过特殊处理，为客户提供更耐用、更坚固的部件。采用坯料加工而成。
与铸造相比，铝制工艺可以减少金属中的杂质。
• 完全可维修 - 对于经常参加赛道日活动的极端用户而言，我们的高强度钢合金球形轴承（带有减少摩擦/延长使用寿命的特氟龙衬里）可以更换，而赛车运动臂则不同，如果球形轴承磨损，客户将不得不购买一套新的臂。
此外，阳极氧化表面和镀锌钢部件能够更好地抵抗各种环境因素的腐蚀。
• 可调悬架几何结构 - 使用我们独特的镀锌钢衬套调整动态外倾角值和侧倾中心高度。
• 实心单球头控制臂端头相比原厂一体式橡胶注塑控制臂（同样采用高阻尼材料），可提供更灵敏的悬架响应。
我们控制臂单球轴承套件中包含高强度钢合金球形轴承）。
• 独特的设计在赛车臂上增加了更多加强筋，以增强强度并提升美观度。
请在下单前查看尺码指南点击此处
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
356
您正在查看的产品与这些编号存在交叉引用关系
类型：无可调推力臂衬套
RSS Tarmac系列赛车下控制臂专为配备行程缩短的减震器/避震器（例如PASM或M030选装件）的降低车身车辆而设计。此外，如果车辆配备了高质量的改装或赛车级绞牙避震套件，例如Bilstein PSS10、KW V3或Ohlins等，也同样适用。
下控制臂与“基本型悬架”（长行程支柱/减震器）或“带有降低弹簧的基本型支柱/减震器”不兼容。
注意：请勿安装在配备基本型减震器/支柱的车辆上，否则当减震器/支柱完全伸展或完全下降时，可能会导致悬架卡滞，从而造成不安全的驾驶状况。
价格：一套两个控制臂，另加 2 个 1mm/2mm/3mm/7mm 垫片。
RSS Tarmac系列控制臂采用6061航空级铝坯制造，从而具有更均匀的分子结构。
与铸造的赛车用臂相比，该臂的每个连接点都经过特殊处理，为客户提供更耐用、更坚固的部件。采用坯料加工而成。
与铸造相比，铝制工艺可以减少金属中的杂质。
• 完全可维修 - 对于经常参加赛道日活动的极端用户而言，我们的高强度钢合金球形轴承（带有减少摩擦/延长使用寿命的特氟龙衬里）可以更换，而赛车运动臂则不同，如果球形轴承磨损，客户将不得不购买一套新的臂。
此外，阳极氧化表面和镀锌钢部件能够更好地抵抗各种环境因素的腐蚀。
• 可调悬架几何结构 - 使用我们独特的镀锌钢衬套调整动态外倾角值和侧倾中心高度。
• 实心单球头控制臂端头相比原厂一体式橡胶注塑控制臂（同样采用高阻尼材料），可提供更灵敏的悬架响应。
我们控制臂单球轴承套件中包含高强度钢合金球形轴承）。
• 独特的设计在赛车臂上增加了更多加强筋，以增强强度并提升美观度。
请在下单前查看尺码指南点击此处
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
356
999356
999361
356
361
99634105307
99634105308
99634105309
99634105310
99634105311
99634105312
99634105313
99634105314
99634105315
99634105316
99634105317
99634112290
99634144190
您正在查看的产品与这些编号存在交叉引用关系
价格: €1,612.75
库存
相关产品
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
Information
GT3 Front Suspension System. The Ultimate Front Suspension System
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
You can buy spare control arms if they need replacing. Part number 2180016-SA
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2180010
您正在查看的产品与这些编号存在交叉引用关系
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
You can buy spare control arms if they need replacing. Part number 2180016-SA
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2180010
2180010
您正在查看的产品与这些编号存在交叉引用关系
价格: €4,581.50
库存
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Information
Split bushing removal tool. 1 req'd per lifetime.
Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms
Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)
It used to be a difficult task
This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.
Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.
Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.
Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.
Combine with bushing installation tools part #2020904 to complete the job.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2020903
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms
Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)
It used to be a difficult task
This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.
Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.
Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.
Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.
Combine with bushing installation tools part #2020904 to complete the job.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2020903
2020903
您正在查看的产品与这些编号存在交叉引用关系
价格: €178.50
库存
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Information
Adjustable lower control arms (lower wishbone)
This is the replacement Control arms for the 2180010 kit.
GT3 Front Suspension System. The Ultimate Front Suspension System
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2180016-SA
您正在查看的产品与这些编号存在交叉引用关系
This is the replacement Control arms for the 2180010 kit.
GT3 Front Suspension System. The Ultimate Front Suspension System
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
2180016-SA
2180016-SA
2180010
您正在查看的产品与这些编号存在交叉引用关系
价格: €1,487.50
由供应商供货